Is Your Hummer H2 Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than turning the key on your powerful HUMMER H2 and getting nothing but a crank, a sputter, or worse, having it die on you in traffic. These are classic signs that your Fuel Pump Control Module (FPCM), also known as a Fuel System Control Module (FSCM), has failed. This small but critical component regulates the voltage sent to your fuel pump, ensuring your engine gets the precise amount of fuel it needs. When it fails, it leaves you stranded. This pre-programmed module is the definitive, hassle-free solution to get your H2 running reliably again.
Common Symptoms & Your Solution
A failing FPCM can mimic other fuel system problems, but it often presents a specific set of symptoms. If you’re experiencing any of the following, this module is the likely culprit:
- Engine cranks but won’t start: The module isn’t commanding the fuel pump to turn on.
- Stalling under load or acceleration: The module can’t properly increase fuel flow to meet engine demand.
- Hesitation and rough idling: Inconsistent voltage from the module leads to erratic fuel pressure.
- Check Engine Light with DTCs: Look for codes like P069E, P0230, or P0606, which point directly to a fault in the FPCM or its circuit.
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take a genuine GM module and program it with the latest factory software specifically matched to your vehicle’s VIN. This means you can bypass the expensive trip to the dealership for programming. With our 2008-2009 HUMMER H2 Fuel Pump Control Module 20850907, you get a part that is truly plug-and-play.
Features & Benefits
- ✔ Pre-Programmed to Your VIN: Skip the dealer. This module arrives ready for installation, saving you time, towing fees, and expensive programming charges.
- ✔ Restores Engine Performance: Eliminates stalling, hesitation, and no-start conditions by delivering precise and stable fuel pressure.
- ✔ Direct-Fit OE Replacement: Engineered to meet or exceed original equipment specifications for a perfect fit and seamless integration with your H2’s systems.
- ✔ Updated GM Software: Flashed with the newest updates from General Motors to address known issues and ensure optimal performance and longevity.
- ✔ Broad Compatibility: Replaces a wide range of original part numbers, including 13501024, 20759945, 25866052, 25967325 and more.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
An Expert’s Note on GM Fuel Systems
As a technician, I’ve seen countless GM trucks and SUVs from this era come in with fuel delivery issues. The FPCM is a common failure point, especially due to its location on the frame rail where it’s exposed to heat, moisture, and vibration. Many people make the mistake of replacing the in-tank fuel pump first, only to find the problem persists. The real issue is that the module loses its ability to properly regulate voltage. Installing a non-programmed module is a waste of money because the vehicle’s computer won’t recognize it. By getting a pre-programmed 2008-2009 HUMMER H2 Fuel Pump Control Module 20850907, you’re not just buying a part; you’re buying the correct diagnostic conclusion and the final solution in one box.
Frequently Asked Questions
Why does this module need to be programmed?
The Fuel Pump Control Module is a smart device that communicates with your vehicle’s main computer (ECM). Programming, or ‘flashing’, loads vehicle-specific software using your VIN, allowing the module to function correctly within your H2’s unique system parameters. Without it, the vehicle will not run properly, if at all.
How do I provide my VIN number?
After you complete your purchase, simply reply to your order confirmation email with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is the first step in our fulfillment process.
Where is the FPCM located on my Hummer H2?
On the 2008-2009 HUMMER H2, the Fuel Pump Control Module is typically mounted to the driver’s side frame rail, often near the spare tire or above the rear axle. It’s a black plastic box with an electrical connector. Always disconnect the battery before attempting replacement.
Is this a genuine OE part?
This is a high-quality replacement part that is programmed using genuine GM software and calibrations. It is designed to meet or exceed all original equipment specifications for fit, form, and function, ensuring a reliable and lasting repair.
Will this fix my P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common codes indicating a failed FPCM. While you should always perform a complete diagnosis, replacing the module with this pre-programmed unit is the standard and effective repair for this code on the 2008-2009 HUMMER H2 Fuel Pump Control Module 20850907 and related vehicles.