Restore Uncompromising Power to Your Hummer H2
There’s nothing more frustrating than turning the key on your Hummer H2 and getting nothing but a crank, or worse, having it stall out unexpectedly. That commanding presence on the road feels lost when your vehicle’s reliability is in question. A faulty Fuel Pump Control Module (FPCM) is often the culprit, disrupting the precise fuel flow your engine needs to perform. This isn’t just an inconvenience; it’s a critical failure that sidelines your truck. This pre-programmed 2008-2009 Hummer H2 Fuel Pump Control Module is the definitive, no-hassle solution to get you back on the road with confidence.
Common Symptoms & Your Solution
If your H2 is experiencing any of the following issues, a failing FPCM is the likely cause:
- Engine cranks but refuses to start
- Sudden stalling while driving or at idle
- Hesitation or sputtering during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or P0606
Our module is the direct answer to these problems. We take the guesswork and extra expense out of the repair. Before we ship it, we flash the unit with the latest stable GM software, perfectly calibrated to your vehicle’s specific VIN. This means no costly trips to the dealership for programming—it’s a true plug-and-play fix that restores factory performance right out of the box.
Features & Benefits
- âś” VIN-Programmed for Your H2: Arrives ready for installation with no additional programming required. Just plug it in and restore proper fuel system function.
- âś” Latest GM Software Updates: We flash each module with the newest software releases from GM, ensuring optimal performance and longevity.
- âś” Solves Common Fuel Issues: Directly addresses no-start, stalling, and hesitation problems caused by a faulty FPCM.
- âś” Direct-Fit Replacement: Engineered to be a perfect replacement for a wide range of original part numbers, including 20759945, 13501024, 20850907, and more.
- âś” Get Back on the Road Fast: Skip the dealership appointment and high labor costs. This is a solution designed for both professional technicians and capable DIY owners.
- âś” Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
Expert Insight: The Hidden Failure Point
From over two decades of hands-on diagnostics, I’ve seen this exact failure countless times on GM trucks and SUVs. The original FPCM is typically mounted on the driver-side frame rail. This location exposes it to everything the road throws at it: water, salt, mud, and vibrations. Over time, corrosion attacks the circuit board and connectors, leading to intermittent or complete failure. Many owners replace the fuel pump first, only to find the problem persists. By replacing the module with this pre-programmed 2008-2009 Hummer H2 Fuel Pump Control Module, you’re not just fixing the symptom; you’re correcting the known weak point in the fuel system, saving you time and hundreds of dollars in diagnostic fees and dealer programming costs.
Frequently Asked Questions
Do I need to program this module?
No. That’s the primary benefit of our service. We program the module to the specific VIN you provide during checkout. It will arrive at your door ready to be installed, requiring no further modifications or dealer intervention.
Where is the FPCM located on my 2008-2009 Hummer H2?
On the Hummer H2 and most other compatible GM trucks and SUVs, the Fuel Pump Control Module is located on the driver-side frame rail, typically above the spare tire. It’s crucial to clean the mounting area and ensure a solid ground connection during installation.
What is the process after I place my order?
It’s simple. After you complete your purchase, you will need to send us your vehicle’s 17-digit VIN. Our technicians will then use your VIN to flash the module with the correct, most up-to-date GM software before we ship it to you.
Is this compatible with other part numbers?
Yes. This module is a direct replacement for a wide range of original part numbers, including 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325. If your original module has one of these numbers, this part will work for you.
What if this doesn’t fix my problem?
While this 2008-2009 Hummer H2 Fuel Pump Control Module is the solution for the vast majority of fuel-related electrical issues, we always recommend proper diagnostics. If you have any questions before or after your purchase, our experienced support team is here to help you verify the issue and ensure you get the right part for the job.