Is Your Hummer H2 Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than having the raw power of a Hummer H2 at your command, only to be sidelined by an unpredictable fuel system. If you’re experiencing sudden engine stalls, a frustrating crank-no-start condition, or a check engine light that just won’t go away, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This isn’t just an inconvenience; it’s a critical failure that compromises the dependability you expect from your vehicle. It’s time to restore the commanding performance of your H2 with a reliable, intelligent solution.
Common Symptoms & Your Definitive Solution
A faulty FPCM can manifest in several ways, often leading to misdiagnosis and wasted money on other parts. This module is the brain of your fuel delivery system, and when it fails, the symptoms are clear. This pre-programmed 2008-2009 Hummer H2 Fuel Pump Control Module is the definitive fix for these issues.
- ✔ VIN-Programmed for Your H2: This isn’t a generic, one-size-fits-all part. We flash the module with the latest GM software specifically matched to your vehicle’s VIN. This ensures perfect communication with your H2’s computer systems for a true plug-and-play installation, saving you a costly trip to the dealership.
- ✔ Restores Proper Fuel Pressure: By regulating the correct voltage to the fuel pump, this module eliminates the root cause of engine stalling, hesitation under load, and hard starting. Get back the smooth, consistent power delivery your Hummer was built for.
- ✔ Direct-Fit OE Replacement: Engineered to match all factory specifications, this module mounts in the original location and connects to the factory harness without any modifications. It’s a hassle-free installation process.
- ✔ Solves Common DTCs: This is the direct solution for diagnostic trouble codes like P069E, P0230, and U0109 (Lost Communication With Fuel Pump Control Module). Clear those codes for good and pass your emissions test with confidence.
- ✔ Wide GM Compatibility: While perfect for your H2, this module also serves as a direct replacement for a wide range of GM trucks and SUVs, cross-referencing multiple part numbers including 15213110, 20759945, and 25967325.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
An Expert’s Note on FPCM Failure
“Over my 20 years on the shop floor, I’ve seen countless GM trucks and SUVs, including the mighty H2, towed in with these exact symptoms. The original FPCMs were often mounted on the frame rail, exposed to moisture and corrosion, leading to premature failure. The biggest mistake people make is buying a used module. Without being programmed to the specific vehicle’s VIN, it simply won’t work and can even cause further electrical issues. This pre-flashed 2008-2009 Hummer H2 Fuel Pump Control Module is the only way to do the job right the first time, giving you dealership-level precision without the dealership price tag.”
Don’t let a small electronic module compromise the capability of your Hummer. By providing us with your VIN upon purchase, you receive a component that is fully prepared for your exact vehicle. The installation is straightforward, restoring the critical fuel-to-air ratio your engine needs to perform at its peak. Order your 2008-2009 Hummer H2 Fuel Pump Control Module today and get your rig back on the road with the power and reliability you demand.
Frequently Asked Questions
Why is VIN programming so important for this module?
The Fuel Pump Control Module must communicate with your vehicle’s main computer (ECU) and other systems. VIN programming ensures the module has the correct software and calibration for your H2’s specific configuration, preventing communication errors, check engine lights, and no-start conditions.
Where is this part located on my Hummer H2?
On the 2008-2009 Hummer H2, the FPCM is typically mounted on the driver’s side frame rail, near the spare tire. It’s exposed to the elements, which is a common reason for its failure.
How do I provide my VIN after purchase?
After completing your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the module until we receive your VIN, as the programming is a critical step in the process.
Will this fix a P069E trouble code?
Yes. The DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. This module is the direct and correct solution for this and related fuel system communication codes.
Is this a new or used part?
This is a high-quality, fully tested component that is guaranteed to perform to OE specifications. It is programmed with the latest stable GM software and is ready for service right out of the box.
What if I have a different GM truck or SUV listed in the fitment?
This module fits a wide variety of GM vehicles. As long as your make, model, and year are listed in our compatibility chart, and you provide us with your VIN, this part will be programmed correctly for your specific vehicle, whether it’s a Silverado, Tahoe, Acadia, or any other listed model.