Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
If you’re dealing with frustrating fuel delivery problems in your 2008-2009 GM vehicle, a faulty Fuel Pump Control Module (FPCM) is one of the most common culprits I see in my shop. I’ve personally diagnosed hundreds of these issues on vehicles like the Silverado, Tahoe, and Escalade. The symptoms are classic: the engine cranks but won’t fire up, it stalls unexpectedly at a stoplight, or you get a check engine light with codes like P069E. The root cause is often the module’s location on the frame rail, where it’s constantly exposed to road salt, water, and vibration, leading to internal failure or corroded connections.
Don’t let a small electronic box leave you stranded. This is the definitive, hassle-free solution to get your vehicle running reliably again.
The Easiest Fix: A Pre-Programmed 2008-2009 GM Fuel Pump Module
Forget about towing your vehicle to a dealership and paying for expensive diagnostics and programming fees. We handle the complicated part for you. This FPCM arrives at your door completely programmed with the latest GM-approved software, specifically matched to your vehicle’s VIN. It’s a true plug-and-play component that restores factory function and reliability right out of the box.
Expert Pro Tip from a 20-Year Tech: Before installing your new FPCM, take a moment to thoroughly inspect the vehicle’s wiring harness connector. These modules are often exposed to the elements, and corrosion on the pins is a leading cause of repeat failure. Use a small wire brush and electrical contact cleaner to ensure a perfect connection. A dab of dielectric grease on the connector seal can help prevent future moisture issues.
Key Benefits of This VIN-Matched FPCM:
- โ No Programming Required: We flash the module to your specific VIN before shipping. It’s ready for installation immediately.
- โ Solves Common Issues: A direct fix for no-start conditions, stalling, hesitation, and fuel-related trouble codes (P069E, P0230, P025A).
- โ Updated GM Software: Programmed with the most current calibrations to address known factory issues and improve long-term durability.
- โ Saves Time and Money: Avoid a costly and time-consuming trip to the dealership. This is a repair you can confidently do yourself.
- โ Guaranteed Compatibility: This module is a direct replacement for a wide range of original part numbers.
Simple Plug-and-Play Installation Guide
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
- Locate the Old Module: On most trucks and large SUVs (Silverado, Sierra, Tahoe, Yukon, Escalade), you’ll find the FPCM mounted to the driver’s side frame rail, typically near the spare tire. On other models (like the Traverse, Acadia, or Colorado), it may be on a rear crossmember or frame section.
- Disconnect and Remove: Carefully press the tab to unplug the main electrical connector. Inspect it for any green or white corrosion. Then, unbolt the old module from the frame.
- Install the New Module: Bolt your new, pre-programmed FPCM into the same location. Securely plug the electrical connector back in until it clicks.
- Final Steps: Reconnect the negative battery terminal. Turn the key to the ‘ON’ position (without starting) for 10 seconds to allow the fuel system to prime. Start your engine and verify the repair.
Direct Replacement for Part Numbers:
This module replaces the following GM and AC Delco part numbers: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.
Guaranteed Vehicle Fitment:
This part is a confirmed fit for the Fuel Pump Control Module on the following vehicles:
- 2009 GMC Acadia
- 2008-2009 Chevrolet Avalanche 1500
- 2008-2009 Cadillac Escalade, ESV, EXT
- 2009 Buick Enclave
- 2008-2009 Chevrolet Express 1500 Van
- 2008-2009 GMC Savana 1500 Van
- 2007-2009 Chevrolet Silverado 1500 (2007 is new body style only)
- 2007-2009 GMC Sierra 1500 & Sierra Denali (2007 is new body style only)
- 2008-2009 Chevrolet Suburban 1500
- 2008-2009 Chevrolet Tahoe
- 2008-2009 GMC Yukon & Yukon XL 1500
- 2009 Chevrolet Traverse
- 2009 GMC Canyon / Chevrolet Colorado
- 2009 Hummer H3
- 2008-2009 Hummer H2
- 2009 Saturn Outlook
- 2008-2009 Saturn Vue
Please provide your VIN upon checkout so we can program the module for your specific vehicle.