Programmed 2008-2009 Express 1500 Fuel Pump Control Module | 25866052

Get Back to Work, Fast.

This is a fully programmed Fuel Pump Control Module for your 2008-2009 Express 1500. It arrives flashed with the latest GM software matched to your VIN, eliminating the need for a dealer visit. Fix common no-start, stalling, and check engine light issues (P069E, P0230) with this direct-fit component. Order today to restore your van’s reliability.

$244.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



Guaranteed Safe Checkout

Stop Stalling, Start Driving: The Ultimate FPCM Solution

Is your 2008-2009 Chevrolet Express 1500 van stalling, hesitating, or refusing to start? A faulty Fuel Pump Control Module (FPCM), also known as a Fuel System Control Module (FSCM), is a notoriously common culprit on these workhorse vehicles, leaving you stranded and costing you valuable time and money. This pre-programmed module is the direct-fit, plug-and-play solution to restore your van’s reliability and get you back on the job fast.

Common Symptoms & Your Direct-Fit Solution

A failing FPCM can mimic a bad fuel pump, leading to frustrating and expensive misdiagnoses. If you’re experiencing any of the following, this module is your likely solution:

  • Check Engine Light: Often with diagnostic trouble codes (DTCs) like P069E, P0230, or P0627.
  • No-Start Condition: The engine cranks but won’t fire up due to a lack of fuel pressure.
  • Stalling: The engine dies unexpectedly, especially when coming to a stop or at idle.
  • Engine Hesitation: A noticeable stumble or lack of power during acceleration.
  • Rough Idle: The engine runs erratically when the vehicle is not moving.

This module is the definitive fix. We take the guesswork and the expensive dealership trip out of the equation. By providing your VIN upon purchase, you receive a unit that is professionally flashed with the latest GM software updates, specifically matched to your van’s configuration. This isn’t just a replacement part; it’s a comprehensive solution for your 2008-2009 Express 1500 Fuel Pump Control Module.

Features & Real-World Benefits

  • ✔ Plug & Play Installation: Arrives pre-programmed to your vehicle’s VIN. No dealer visit or expensive scan tools required.
  • ✔ Updated GM Software: Flashed with the newest factory calibrations to correct known issues and improve fuel system performance.
  • ✔ Restore Engine Performance: Precisely controls fuel pressure to eliminate stalling, hesitation, and rough idle for a smooth, reliable ride.
  • ✔ Guaranteed Compatibility: A direct replacement for a wide range of original part numbers, including 25866052, 13501024, 20759945, and more.
  • ✔ Built for Durability: Designed to withstand the harsh environment of its frame-rail mounting location, providing a lasting repair.
  • ✔ This unit is backed by our one-year replacement warranty.

Expert Mechanic’s Insight

From over 20 years in the garage, I’ve seen countless owners replace the in-tank fuel pump on these GM trucks and vans, only to have the exact same no-start or stalling problem remain. The real issue is almost always this FPCM. Its location on the frame rail exposes it to years of heat, water, and road salt, causing internal failure. The critical part of the repair is the programming—a new module from the parts store is just a paperweight until it’s coded to the vehicle. Our service of programming the 2008-2009 Express 1500 Fuel Pump Control Module before it ships saves you that massive diagnostic headache and the high labor costs of a dealership, making this the smartest, most efficient way to fix your vehicle right the first time.

Frequently Asked Questions

Do I need to take this part to a dealer for programming?

Absolutely not. The main benefit of our service is that we program the module for you before we ship it. All you need to do is provide us with your vehicle’s VIN after purchase. The module will arrive ready to install.

Where is this module located on my 2008-2009 Express 1500?

On the Express and Savana vans, as well as most GM trucks of this era (Silverado, Sierra, Tahoe), the FPCM is typically mounted to the driver’s side frame rail, roughly underneath the driver’s door area.

Will this fix a Check Engine Light with code P069E?

Yes, P069E (Fuel Pump Control Module Commanded OFF) is one of the most common trouble codes indicating a failure of this exact module. Replacing your old FPCM with our pre-programmed unit is the standard and effective repair for this code.

What information do you need from me to program it?

We only need your 17-digit Vehicle Identification Number (VIN). You can typically find this on your driver’s side dashboard (visible through the windshield), on the driver’s door jamb sticker, or on your vehicle’s registration and insurance documents.

Is this part compatible with other part numbers?

Yes, this module is a direct replacement for a wide range of GM part numbers, including 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325. It covers an extensive list of GM trucks and SUVs from this era.

Genuine OEM

Yes

Year
Interchange part number

Condition

Seller refurbished

Model

express-1500

Make

Year

2007

Brand

GM

MPN

25866052

Manufacturer Part Number

, , , , , , ,

GTIN

Does not apply

Scroll to Top