Restore Your Escalade’s Flawless Performance
There’s nothing more frustrating than a luxury vehicle that refuses to cooperate. If your 2008-2009 Cadillac Escalade is experiencing sudden stalling, hesitation during acceleration, or a complete failure to start, a faulty Fuel Pump Control Module (FPCM) is the most likely culprit. This critical component regulates the voltage sent to your fuel pump, and when it fails, it leaves you stranded. This isn’t just an inconvenience; it’s a disruption to your day and a compromise on the reliability you expect. Get back on the road with confidence with this direct-fit, pre-programmed solution.
Common Symptoms & Your Solution
A failing FPCM can mimic other fuel system problems, but it often presents with a specific set of symptoms. If you’re experiencing any of the following, this module is the definitive fix you need:
- Engine cranks but will not start
- Vehicle starts and then immediately stalls
- Sudden loss of engine power while driving
- Illuminated Check Engine Light with diagnostic trouble codes (DTCs) such as P069E or P0230
- Rough idle or engine hesitation
Our solution is a Programmed 2008-2009 Escalade Fuel Pump Control Module that arrives ready for installation. We take the guesswork and extra expense out of the repair by flashing the unit with the latest GM software, specifically matched to your vehicle’s VIN. This eliminates the need for an expensive trip to the dealership for programming, saving you both time and money.
Features & Tangible Benefits
- ✔ Plug-and-Play Installation: This module is pre-programmed to your vehicle’s unique VIN. Simply install it, and you’re ready to go—no dealer visit required.
- ✔ Updated GM Software: We flash each unit with the newest stable software release from General Motors, correcting original factory flaws and improving performance.
- ✔ Restored Engine Reliability: By delivering precise voltage to the fuel pump, this module restores the smooth power delivery and dependable starting you expect from your Cadillac.
- ✔ Guaranteed Compatibility: This unit directly replaces a wide range of original part numbers, including 13501024, 15213110, 20759945, 20850907, and more, ensuring a perfect fit.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Insight: Why Do These Modules Fail?
As a technician with over two decades of experience, I’ve replaced hundreds of these FPCMs on GM trucks and SUVs. The primary reason for failure is their location. On the Escalade and similar platforms, the module is mounted to the driver’s side frame rail, underneath the vehicle. This exposes it to a constant barrage of road grime, water, salt, and extreme temperature cycles. Over time, moisture intrudes past the seals, corroding the delicate internal circuit board and leading to erratic behavior or complete failure. Our process ensures the module you receive is loaded with the most robust software to manage the fuel system efficiently, providing a more durable solution than simply replacing it with another old unit.
Frequently Asked Questions
Why does this module need to be programmed to my VIN?
The Fuel Pump Control Module communicates with your vehicle’s main computer (ECU) and other systems. Programming it to your specific Vehicle Identification Number (VIN) ensures it has the correct software and calibration for your Escalade’s exact configuration, preventing compatibility issues and ensuring proper fuel system operation.
What happens if I install a module that isn’t programmed?
An unprogrammed module will not work correctly. Your vehicle will likely fail to start and will set a Check Engine Light with communication error codes. Our pre-programming service completely eliminates this problem.
Where is this module located on my 2008-2009 Escalade?
You will find the FPCM mounted on the driver’s side frame rail, typically located above the spare tire. It’s held in place by a few bolts and has one main electrical connector, making it accessible for replacement.
Is this a difficult part to replace?
For someone with basic mechanical skills and tools, this is a straightforward repair that can often be completed in under an hour. Since our module is plug-and-play, you avoid the complexity of vehicle programming.
How do I provide my VIN after purchase?
After you complete your purchase, simply send us a message with your 17-digit VIN. We cannot ship your order until we receive this information, as it is essential for the programming process.