Restore Your Cadillac’s Flawless Performance
Is your 2008 or 2009 Cadillac Escalade EXT suffering from frustrating starting issues, unexpected stalling, or a persistent ‘Service Fuel System’ warning on the dash? These are classic signs of a failing Fuel Pump Control Module (FPCM). This critical component, also known as a Fuel System Control Module (FSCM), is responsible for precisely managing the voltage sent to your fuel pump. When it fails, it compromises the performance, reliability, and sophisticated operation you expect from your vehicle. This isn’t just an inconvenience; it’s a problem that demands a precise solution.
Our pre-programmed FPCM is the definitive, dealer-free solution to restore your truck’s power and your peace of mind. We take the guesswork and hassle out of the repair by flashing the module with the latest GM software, specifically matched to your vehicle’s VIN before it ever leaves our facility. This ensures a seamless, plug-and-play installation that gets you back on the road with confidence. Don’t let a faulty module dictate your driving experience; install the correct, perfectly matched part and feel the difference.
Common Symptoms & Your Solution
A failing FPCM can manifest in several ways, often being misdiagnosed as a bad fuel pump. If you’re experiencing any of the following, this module is the most likely culprit:
- No-Start or Long Crank Times: The engine turns over but struggles to start or fails to fire up at all.
- Engine Stalling: The engine cuts out unexpectedly, especially at idle or under load.
- Hesitation & Power Loss: The vehicle hesitates or stumbles during acceleration.
- Check Engine Light: Common Diagnostic Trouble Codes (DTCs) associated with a bad FPCM include P069E, P0230, P025A, and U0109 (Lost Communication with Fuel Pump Control Module).
This direct-fit 2008-2009 Escalade EXT Fuel Pump Control Module is the authoritative fix for these issues, restoring precise fuel pressure control and eliminating frustrating error codes.
Features & Benefits
- ✔ VIN-Programmed for You: Arrives ready for installation with the latest GM software updates tailored specifically to your Escalade EXT. No expensive trip to the dealer for programming is required.
- ✔ Restores Engine Performance: Eliminates stalling, hard starts, and hesitation by delivering the correct voltage to the fuel pump for optimal fuel pressure.
- ✔ Direct-Fit Replacement: Engineered to match the original factory part (OEM Part #25785013 and others) for a perfect fit and seamless connection.
- ✔ Solves Common DTCs: Clears fault codes like P069E and U0109 that point directly to a failing or non-communicating FPCM.
- ✔ This unit is backed by our one-year replacement warranty.
An Expert’s Insight on FPCM Failure
As a technician, I’ve replaced hundreds of these modules on GM trucks and SUVs. The number one killer of the original FPCM is its location. Mounted on the driver’s side frame rail, it’s constantly exposed to water, road salt, and vibrations, leading to corrosion and internal electronic failure. When customers install a blank, un-programmed module from a local parts store, they’re often frustrated to find it doesn’t solve the problem, as the vehicle’s computer systems can’t communicate with it. Our VIN-programming service bypasses this entire ordeal. We ensure the module is not only a physical match but an electronic one, allowing it to integrate perfectly with your truck’s network the moment you plug it in. It’s the closest you can get to a factory-level repair, without the factory-level price tag.
Frequently Asked Questions
Do I need to program this module after I receive it?
No. This is the core benefit of our service. We program the module to the specific VIN you provide during checkout. It will arrive at your door ready for a true plug-and-play installation.
Where is this module located on my 2008-2009 Escalade EXT?
The Fuel Pump Control Module is typically mounted on the driver’s side frame rail, often near the spare tire. It’s a black box with a large electrical connector and cooling fins.
Is this part compatible with other part numbers?
Yes, this module is a direct replacement for a wide range of GM part numbers, including 13501024, 15213110, 20759945, 20850907, 25854536, 25866052, and 25967325.
What happens if I forget to provide my VIN?
We cannot ship your order without a VIN. The programming is essential for the module to function in your vehicle. We will contact you to retrieve the VIN before we can process and ship your part.
Could my symptoms be a bad fuel pump instead?
While possible, the symptoms of stalling, no-start, and specific codes like P069E and U0109 are far more commonly caused by a failed FPCM on these GM platforms. The FPCM is often the first component to check and replace for these issues.
What kind of warranty is included?
This unit is backed by our one-year replacement warranty, giving you confidence in your repair.