Restore Peak Performance to Your Cadillac
Is your 2008-2009 Escalade EXT suffering from frustrating and unpredictable issues like stalling at intersections, hesitating under acceleration, or refusing to start altogether? These are classic signs of a failing Fuel Pump Control Module (FPCM), a critical component that regulates fuel pressure. Driving a luxury vehicle that isn’t dependable is stressful. This module is the definitive solution to restore the smooth, powerful, and reliable performance you expect from your Cadillac, getting you back on the road with confidence.
Common Symptoms of a Failing FPCM & Your Direct-Fit Solution
A faulty FPCM can mimic a bad fuel pump, leading to misdiagnosis and wasted money. Before you replace the pump, check if your vehicle is exhibiting these common symptoms. This module is designed to resolve them permanently.
- Check Engine Light: Often with codes like P069E, P0230, P025A, or U0109.
- Engine Stalling: The engine may cut out unexpectedly, especially at low speeds or idle.
- No-Start Condition: The engine cranks but won’t start due to a lack of fuel pressure.
- Hesitation or Stumbling: The vehicle may feel sluggish or jerky during acceleration.
- Reduced Engine Power: Your truck may go into “limp mode” to protect the engine.
Our solution is a genuine GM 2008-2009 Escalade EXT Fuel Pump Control Module that arrives at your door pre-programmed specifically for your vehicle. Simply provide your VIN at checkout, and our technicians will flash the unit with the latest GM software. This eliminates the need for an expensive trip to the dealership for programming, saving you significant time and money.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: This module is not a generic part. We flash it with your specific vehicle’s VIN, ensuring perfect communication with the onboard computers and optimal fuel system performance.
- ✔ Plug-and-Play Installation: Because it arrives pre-programmed, installation is straightforward. Simply disconnect the old module and connect the new one. No special tools or dealer software required.
- ✔ Restores Original Performance: Corrects fuel delivery issues to eliminate stalling, hesitation, and hard starts, bringing back the smooth and responsive power your Escalade is known for.
- ✔ Cost-Effective Solution: Avoid the high labor costs and programming fees associated with dealership repairs. This is a direct, affordable fix that you can often install yourself.
- ✔ Broad GM Compatibility: This module is a direct replacement for multiple part numbers, including 13501024, 15213110, 20759945, 20850907, and more, across a wide range of GM trucks and SUVs.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Insight: The Critical Role of VIN Programming
In modern GM vehicles like your Escalade, the fuel system is highly sophisticated. The FPCM doesn’t just turn the fuel pump on and off; it precisely varies the voltage to the pump to maintain exact fuel pressure based on engine load. Using a non-programmed or incorrectly programmed module can lead to incorrect fuel pressure, causing poor performance, decreased fuel economy, and even premature failure of your new fuel pump. By flashing this 2008-2009 Escalade EXT Fuel Pump Control Module with your VIN, we ensure it has the exact calibration files for your vehicle’s specific engine, transmission, and emissions equipment, guaranteeing a correct and lasting repair.
Frequently Asked Questions
Why is VIN programming so important for this part?
VIN programming loads the correct software and calibration files for your specific vehicle. Without it, the module won’t communicate properly with your vehicle’s computer (ECU), leading to incorrect fuel pressure, poor performance, and persistent check engine lights. Our pre-programming service makes this a dealer-free, plug-and-play repair.
Where is this module located on my Escalade EXT?
On most GM trucks and SUVs from this era, including the Escalade EXT, the Fuel Pump Control Module is mounted to the frame rail on the driver’s side, typically near the spare tire. It’s exposed to the elements, which is a primary reason for its high failure rate.
How do I provide my VIN?
After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship your part until we receive and program it with your VIN, so please provide it promptly to avoid delays.
Will this fix my Check Engine Light for code P069E?
Yes, P069E (Fuel Pump Control Module Commanded OFF) is one of the most common trouble codes indicating a failed FPCM. As long as the wiring and fuel pump are in good condition, this pre-programmed 2008-2009 Escalade EXT Fuel Pump Control Module is the correct and definitive fix for that code.
My old module has a different part number. Will this still work?
Absolutely. GM has updated this part several times. This module is a direct replacement for a range of part numbers, including 13501024, 15213110, 20850907, 25785013, 25854536, 25866052, and 25967325. As long as your vehicle is listed in the compatibility chart, this part will fit and function correctly.