Is your HEMI-powered vehicle feeling less like a beast and more like a burden?
If your 2007 Dodge Magnum, Charger, or Chrysler 300 is suffering from a persistent Check Engine Light, erratic performance, or a frustrating no-start condition, a failing Engine Control Module (ECM) is the most likely culprit. The ECM is the central computer of your vehicle, and when it fails, it can cause a cascade of problems that leave you stranded and stressed. Don’t let a faulty computer keep you from enjoying the power and performance you expect. This professionally prepared ECM is the direct, reliable solution to get your vehicle back on the road and running strong.
Common Symptoms & Your Direct Solution
A failing engine computer can manifest in numerous ways. You might be experiencing one or more of the following issues:
- Persistent Check Engine Light (CEL) with codes like P0601, P0606, or other internal controller errors.
- No-Start or Hard-Start Condition where the engine cranks but refuses to fire up.
- Poor Engine Performance, including rough idling, hesitation, stalling, or a noticeable loss of power.
- Decreased Fuel Economy as the engine is no longer receiving the correct fuel and timing commands.
- Communication Errors with diagnostic scan tools or other modules on the vehicle.
This replacement Engine Control Module is the definitive fix for these issues. It’s designed to restore communication and proper function to your vehicle’s complex systems. As a key component for your vehicle, this 2007 Dodge Magnum ECM is prepared to meet or exceed original factory specifications, ensuring a lasting repair.
Features & Tangible Benefits
- ✔ No Dealer Visit Needed: This module arrives pre-programmed to your vehicle’s specific VIN and mileage. It’s a true Plug & Play solution, saving you time and the high cost of dealership programming.
- ✔ Guaranteed Compatibility: Engineered to be a direct-fit replacement for a wide range of original part numbers (including 05094803AA through 05094803AJ), ensuring a perfect match for your 5.7L or 6.1L HEMI engine.
- ✔ Restore Peak Performance: By replacing your faulty computer, you’ll solve frustrating issues like rough idling, poor acceleration, and incorrect shifting, bringing your vehicle’s power and responsiveness back to factory standards.
- ✔ Simple Installation: Designed for a straightforward swap. Simply disconnect the battery, remove your old module, install the new one, reconnect the battery, and you’re ready to go.
- ✔ Purchase with Confidence: This unit is backed by our one-year replacement warranty.
An Expert’s Note on Programming: From over 20 years in the garage, I’ve seen countless drivers frustrated by modules that weren’t programmed correctly. A generic computer won’t work because the ECM is the ‘brain’ that communicates with your transmission, security system, and ABS. Our pre-programming service for this 2007 Dodge Magnum ECM ensures all these systems handshake perfectly from the moment you turn the key, eliminating the compatibility headaches that plague lesser solutions and getting you back on the road without a hitch.
Frequently Asked Questions
Is this module truly “Plug and Play”?
Yes. We use the VIN you provide during checkout to flash the module with your vehicle’s exact software and security information. This means no additional programming or dealer visits are required for installation. It is ready to install right out of the box.
How do I provide my VIN and mileage?
You can provide your vehicle’s VIN and current mileage during the checkout process. Please double-check the information for accuracy to ensure a perfect programming match.
Will this fit my 2007 Dodge Charger with the 6.1L engine?
Absolutely. This ECM is fully compatible with the 2007 Dodge Charger, Dodge Magnum, and Chrysler 300 models equipped with either the 5.7L or 6.1L HEMI engines. It is a direct replacement for the part numbers listed in the description.
What if my original part number is slightly different?
This module is a verified replacement for a full range of part numbers, including 05094803AA, 05094803AB, 05094803AC, and more. As long as your vehicle is a 2007 Charger, Magnum, or 300 with a 5.7L/6.1L engine, this unit is the correct fit.
Do I need to perform a security relearn or program my keys?
No. The security information (SKIM) is transferred to the module during our programming process using your VIN. Your existing keys will work immediately upon installation. This is a crucial part of our Plug & Play service that saves you significant time and money.
What tools are needed for installation of this 2007 Dodge Magnum ECM?
Installation typically requires only basic hand tools, such as a socket set to disconnect the battery and remove the mounting bolts for the module. It is located in the left-hand front of the engine compartment for easy access.