Programmed 2007 Dodge Durango ECM | 5.7L Engine Computer | Plug & Play

Get Back on the Road with Confidence

Tired of your truck or SUV letting you down? This Plug & Play Engine Control Module is the simple, reliable fix for your 2007 Dodge or Chrysler 5.7L. It comes pre-programmed to your vehicle’s VIN, so you can install it and goโ€”no dealer required. Restore dependability and drive with peace of mind. Order your solution now!

$234.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



Guaranteed Safe Checkout

Is Your Truck or SUV Running Rough? Get Back on the Road Fast.

There’s nothing more frustrating than a vehicle you can’t rely on. If your 2007 Dodge Durango, Ram 1500, or Chrysler Aspen is experiencing stalling, erratic behavior, or simply won’t start, a failing Engine Control Module (ECM) is often the culprit. You need a solution that’s not only effective but also straightforward and doesn’t require a costly trip to the dealership. This is it. This module is the heart of your engine management system, and we provide a fully programmed, direct-fit replacement that gets you back to driving with confidence.

Common Symptoms & Your Direct-Fit Solution

A faulty ECM can cause a wide range of confusing issues. If you’re seeing any of the following, it’s a strong indicator that your engine computer needs replacement:

  • Check Engine Light is on with no clear cause
  • Engine stalls randomly while driving or at idle
  • Complete no-start condition (engine cranks but won’t fire)
  • Poor fuel economy and loss of power
  • Erratic automatic transmission shifting
  • Communication error codes (U-series codes)
  • Specific trouble codes pointing to internal processor failure

This unit is the definitive solution. We take the guesswork out of the repair by pre-programming this specific 2007 Dodge Durango ECM to your vehicle’s unique Vehicle Identification Number (VIN) and mileage. It arrives at your door ready for a simple, Plug & Play installation.

Expert Insight: The “Ghost in the Machine” Fixed

“I’ve seen it a hundred times over my 20 years on the floor. A customer comes in with a list of bizarre, intermittent problems that no one can pin down. The parts cannon has been firedโ€”new sensors, new plugs, you name itโ€”but the problem persists. More often than not, the root cause is a failing ECM. The internal circuits degrade over time, causing unpredictable signals that create these ‘ghost’ issues. Replacing the ECM isn’t just swapping a part; it’s restoring the vehicle’s brain. For a workhorse like a Ram or a family-hauler like a Durango, having a reliable computer means having a vehicle you can trust again. This pre-programmed unit is the most direct path to that peace of mind.”

Features That Deliver Real-World Benefits

  • โœ” Plug & Play Installation: This unit arrives pre-programmed to your specific VIN and mileage. No extra computers or expensive dealer visits are required.
  • โœ” Guaranteed Compatibility: Engineered to be a direct replacement for a wide range of part numbers, ensuring a perfect fit and function for your 5.7L engine.
  • โœ” Restored Performance: Solves common issues like stalling, rough idling, and no-start conditions by restoring the correct engine management parameters.
  • โœ” Cost-Effective Solution: Get the fix you need without paying inflated dealership prices for parts and programming labor. A smart choice for any owner.
  • โœ” Quality Inspected: Every module is thoroughly checked to ensure it meets strict quality standards, giving you a dependable part for the road ahead.
  • โœ” Purchase with Confidence: This unit is backed by our one-year replacement warranty.

Don’t let a faulty computer keep your vehicle sidelined. This is the simple, reliable, and intelligent way to solve complex engine problems. By ordering our pre-programmed 2007 Dodge Durango ECM, you’re not just buying a part; you’re buying a solution that restores your vehicle’s dependability and your peace of mind. Get your truck or SUV running right again.

Frequently Asked Questions

Is this engine computer truly “Plug & Play”?

Absolutely. We use the VIN you provide during checkout to flash the module with your vehicle’s exact software and security information. When it arrives, you simply disconnect the battery, swap the old module with the new one, reconnect the battery, and you’re ready to go. No further programming is needed.

How do I find my part number to confirm compatibility?

Your original ECM’s part number is printed on a sticker on the unit itself. While this module is compatible with all the part numbers listed in the description, providing your VIN is the most important step, as it ensures we program it perfectly for your vehicle’s options.

What information do you need from me to program it?

We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your driver’s side dashboard (viewable through the windshield) or on your vehicle’s registration or insurance card.

Will this fix my transmission shifting problems?

In many cases, yes. The ECM works closely with the transmission control module (TCM). Faulty signals from the ECM can cause harsh shifting, delayed engagement, or other transmission-related symptoms. Replacing a bad 2007 Dodge Durango ECM often resolves these related issues.

Do I need to send my old computer (core) back?

No core charge or return is required for this particular part. You can keep or responsibly recycle your old module.

What does the one-year replacement warranty cover?

This unit is backed by our one-year replacement warranty. This covers any issues related to the function or programming of the module itself. If it fails within one year of the purchase date, we will provide a replacement unit.

Condition

Refurbished

Year

Conditions & Options

Programmed to your VIN 0509445AI

MPN

05094760

Genuine OEM

Yes

Interchange part number

PartNumber

590

Model

DURANGO

Year

2007

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , ,

GTIN

Does not apply

Scroll to Top