Restore Full Command of Your Yukon XL
Are you battling frustrating electrical issues in your GMC Yukon XL? From an air conditioning system that has a mind of its own to power windows that won’t respond, a failing Body Control Module (BCM) can turn your reliable family SUV into a source of daily annoyance. This VIN-programmed BCM is the definitive solution, designed to restore the sophisticated electronic systems of your vehicle to perfect working order, getting you back on the road with confidence and convenience.
Common Symptoms & Your Solution
A faulty BCM is the central point of failure for many of your truck’s comfort and safety features. If you’re experiencing any of the following, this module is the fix you need:
- Unresponsive or intermittent HVAC and climate controls.
- Power windows, door locks, or mirrors not working correctly.
- Interior or exterior lights failing to operate as they should.
- An active airbag warning light, often with DTC B1001.
- Erratic security system behavior or starting problems.
- A range of diagnostic trouble codes related to body electronics.
By replacing your old unit with this pre-programmed 2007-2011 Yukon XL 1500 Body Control Module, you directly address the root cause of these problems, restoring the seamless functionality you expect from your GMC.
Features & Benefits
- ✔ Plug & Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. This critical step ensures full compatibility and allows you to skip expensive and time-consuming programming at a dealership.
- ✔ Restored Functionality: Regain complete and reliable control over your vehicle’s essential electronics, including lights, windows, locks, wipers, and climate systems.
- ✔ Resolve Annoying Warning Lights: Specifically programmed to clear common BCM-related DTCs, helping you get rid of that persistent airbag light (post-install sync may be required) and other dash warnings.
- ✔ OEM-Standard Quality: Built to meet or exceed original equipment specifications, ensuring dependable performance and long-term durability for your workhorse SUV.
- ✔ One-Year Warranty: This unit is backed by our one-year replacement warranty.
- ✔ No Core Charge: We don’t require you to send your old part back. This saves you the hassle and cost of a core return.
An Expert’s Note: The BCM in the GMT900 platform (Tahoe, Yukon, Silverado, etc.) is the vehicle’s nerve center. When it fails, communication between critical systems breaks down, leading to a cascade of confusing issues. Many owners waste time and money chasing individual symptoms—like a faulty window switch or blower motor resistor—when the BCM is the real culprit. Choosing a VIN-programmed module is the smartest repair, as it ensures all of your vehicle’s unique options and security protocols are correctly configured from the moment you plug it in.
This 2007-2011 Yukon XL 1500 Body Control Module is the most efficient way to solve complex electrical problems and restore the comfort and safety of your truck. Its compatibility with a wide range of GM vehicles, including the Silverado, Tahoe, and Escalade, makes it a versatile and reliable choice for any owner. Place your order today and take the first step towards a fully functional, trouble-free vehicle.
Frequently Asked Questions
What does “VIN Programmed” actually mean?
It means we load your vehicle’s unique Vehicle Identification Number (VIN) and its specific factory options into the module before we ship it. This makes the BCM a direct, plug-and-play replacement, as it’s already configured to communicate perfectly with the other computers in your specific Yukon XL.
Is this installation difficult to do myself?
The physical installation is very straightforward for most DIYers. The BCM is typically located under the driver’s side dashboard near the steering column and can be swapped in minutes. However, be aware of potential post-installation electronic procedures, like the airbag system sync, which may require a professional scan tool.
What if my airbag light stays on after I install the new BCM?
If the airbag light remains on (often with DTC B1001), it means the new BCM needs to be electronically introduced to the vehicle’s Sensing and Diagnostic Module (SDM). This is done with a professional-grade scan tool using the “Setup SDM Primary Key in BCM” function. A qualified mechanic can perform this sync quickly.
Do I need to return my old BCM?
No. We do not require a core return. You can keep your old module, which saves you the time, cost, and hassle of packaging and shipping it back.
Will this 2007-2011 Yukon XL 1500 Body Control Module fit other GM trucks?
Yes, this BCM is compatible with a wide range of 2007-2013 GM trucks and SUVs, including the Chevrolet Silverado, Suburban, Tahoe, Avalanche, and Cadillac Escalade models. Always confirm the part number or use our vehicle fitment tool to ensure it’s the correct module for your specific application.