End Your Shifting Nightmares and Get Back on the Road
Is your Pontiac G5 shifting harshly, getting stuck in gear, or throwing transmission warning lights? These frustrating and often worrying symptoms point directly to a failing Transmission Control Module (TCM). Instead of facing a costly trip to the dealership for diagnostics and programming, you can solve the problem yourself with this VIN-programmed T42 TCM. This isn’t just a replacement part; it’s a complete, plug-and-play solution designed to restore the smooth, reliable performance your car had when it was new. We specifically designed this 2007-2010 Pontiac G5 transmission control module to get your daily driver back in perfect working order with minimal downtime.
Common Symptoms & Your Solution
A faulty TCM can make your vehicle feel unpredictable and unsafe. If you’re experiencing any of the issues below, this module is the definitive fix you’ve been looking for. It directly addresses the electronic brain of your transmission, eliminating the guesswork and restoring proper function.
- Harsh, erratic, or delayed gear shifts
- Vehicle stuck in “limp mode” (usually 2nd or 3rd gear)
- Check Engine Light or other transmission warnings are on
- Diagnostic Trouble Codes (DTCs) like P0700, P0750, or other solenoid-related codes
- Failure to upshift or downshift correctly
- Noticeably poor fuel economy
- Complete loss of communication with the transmission
Features & Tangible Benefits
- ✔ Ready to Install, No Dealer Needed: This module arrives pre-programmed to your vehicle’s specific VIN. This plug-and-play setup means you can skip the expensive programming fees and long wait times at the dealership, saving you both time and money.
- ✔ Restores Peak Performance: By installing a module with the latest GM software updates, you ensure your transmission operates with optimal shift points, torque converter lockup, and fuel efficiency, just as the engineers intended.
- ✔ Fixes Annoying Warning Lights: Our programming process specifically targets and resolves the root causes of common transmission-related DTCs, helping you clear that persistent check engine light for good.
- ✔ Built for Durability: Constructed to meet and exceed strict OEM standards, this 2007-2010 Pontiac G5 transmission control module is engineered for long-lasting reliability, giving you confidence in your repair.
- ✔ Guaranteed Peace of Mind: This unit is backed by our one-year replacement warranty. Drive with the assurance that your investment is protected.
Expert Insight: The T42 TCM Advantage
The T42 TCM used in the Pontiac G5 and similar GM platforms is a solid unit, but over time, heat cycles and vibrations can cause internal solder joints and electronic components to fail. This leads to the intermittent and frustrating issues you’re likely seeing. Many shops will simply replace the part, but that’s only half the battle—it still needs to be programmed. Our process handles that critical step for you. By programming it with your car’s VIN beforehand, we ensure all the unique software parameters for your specific vehicle are loaded and ready. It’s the smartest, most efficient way to perform this repair.
Frequently Asked Questions
What does ‘VIN Programmed’ actually mean for me?
It means the module is ready for installation right out of the box. We use your vehicle’s unique 17-digit Vehicle Identification Number (VIN) to load the exact software and calibrations from GM. This makes the module a true plug-and-play part, eliminating the need for any additional, expensive programming tools or a visit to the dealership.
Is this part difficult to install on my Pontiac G5?
No, this is a very straightforward repair for a DIYer with basic tools. On the 2007-2010 Pontiac G5, the TCM is conveniently located on the LH (driver’s side) strut tower in the engine bay. The entire process typically takes less than 30 minutes. Just remember to disconnect the battery before you begin.
Will this fix my transmission error codes like P0700?
Yes. A P0700 code is a general fault code indicating the TCM has detected a problem. By replacing the faulty module with this correctly programmed unit, you are addressing the root cause of the code and other related transmission DTCs. After installation, you can clear the codes with a standard scan tool.
Do I need to send my old part back?
No core charge is required for this part. You can keep your old module, recycle it, or dispose of it at your convenience. This makes the process faster and hassle-free for you.
Is this compatible with other GM vehicles?
Absolutely. While this listing is for the 2007-2010 Pontiac G5 transmission control module, this T42 module is used across a wide range of GM vehicles, including the Chevrolet Cobalt, HHR, Saturn Ion, and many others. The key is our VIN programming, which customizes it for your specific make and model.