Programmed 2007-2010 Dodge Caliber ECM 68043260AB | Plug & Play ECU

Get Back on the Road with Confidence

End the frustration of a faulty engine computer. This replacement ECM for your 2007-2010 Dodge Caliber is pre-programmed to your VIN for a simple, hassle-free Plug & Play installation. Restore your car’s reliability and drive with peace of mind. Order today and solve your vehicle’s electronic issues for good!

$159.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



SKU: 590-01761-48 Categories: ,
Guaranteed Safe Checkout

End Your Engine Troubles and Get Back on the Road Fast

Is your Dodge Caliber, Jeep Patriot, or Compass acting up? Stalling unexpectedly, refusing to start, or showing a persistent Check Engine Light can be incredibly frustrating. These aren’t just annoyances; they’re signs that the very brain of your vehicle, the Engine Control Module (ECM), may be failing. Don’t let a faulty computer keep you sidelined. This professionally prepared engine computer is the simple, reliable, and direct solution to restore your vehicle’s performance and your peace of mind.

Common Symptoms & Your Direct Solution

A failing ECM can cause a cascade of confusing problems. If you’re experiencing any of the following, this module is the definitive fix you’ve been looking for:

  • Intermittent or constant stalling
  • Complete no-start condition (engine cranks but won’t fire)
  • Poor engine performance and rough idling
  • Drastic decrease in fuel economy
  • Check Engine Light with communication error codes (U-codes) or internal processor fault codes (P06xx series)
  • Erratic transmission shifting or other electronic glitches

This replacement 2007-2010 Dodge Caliber ECM 68043260AB is engineered to resolve these issues by replacing the faulty original component with a fully tested and correctly configured unit.

Features & Tangible Benefits

  • โœ” Completely Plug & Play: This unit arrives at your door fully programmed to your vehicle’s specific VIN and mileage. There is absolutely no need for an expensive trip to the dealership for additional programming.
  • โœ” Guaranteed Compatibility: We ensure this module is a perfect match for a wide range of part numbers, including 05150471AA, 68043260AA, 68043260AC, and many more, ensuring a perfect fit for your Caliber, Patriot, or Compass.
  • โœ” Restored Performance & Efficiency: By restoring correct engine parameters, you’ll regain the smooth operation, reliable starting, and optimal fuel economy you expect from your vehicle.
  • โœ” Simple DIY Installation: Designed for a straightforward swap. With basic hand tools, you can disconnect the old module and plug this one in, saving you hundreds in labor costs.
  • โœ” Peace of Mind Included: This unit is backed by our one-year replacement warranty. Drive with confidence knowing your purchase is protected.

Expert Insight: The Critical Role of Correct Programming

As a technician with over two decades of experience, I’ve seen countless vehicle issues caused by mismatched electronics. Simply installing a used computer from another car is a recipe for disaster. It can lead to security system lockouts, incorrect engine timing, and transmission damage. That’s why our process is so critical. We don’t just sell you a part; we provide a complete solution. By flashing this 2007-2010 Dodge Caliber ECM 68043260AB with your car’s unique VIN, we ensure all systems communicate perfectly from the moment you turn the key. This isn’t just a convenienceโ€”it’s the only way to guarantee a lasting, correct repair.

Fitment Information

This engine control module is a direct fit for the following vehicles and configurations:

  • DODGE CALIBER 2007-2008: All options
  • DODGE CALIBER 2009: 1.8L, 2.0L (gasoline), 2.4L (engine opt ED3)
  • DODGE CALIBER 2010: 2.0L, 2.4L
  • JEEP COMPASS 2007-2010: All options
  • JEEP PATRIOT 2007-2010: All options

This unit is the correct replacement for a comprehensive list of part numbers, ensuring you receive the right component for your specific vehicle. When you need a reliable 2007-2010 Dodge Caliber ECM 68043260AB, this is your trusted source.

Frequently Asked Questions

Is this module truly Plug & Play?

Yes, absolutely. We program the module using the VIN and mileage you provide during checkout. When it arrives, you simply install it, and your vehicle will start and run without any further programming or dealer visits required.

What information do you need from me?

We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures we can program the computer to match your car’s exact specifications and security settings.

How do I find the part number on my old ECM?

Your original part number is typically printed on a sticker affixed to the metal case of the engine computer. The ECM is usually located in the engine bay. Look for a series of letters and numbers matching one of the compatible parts listed on this page.

Will this fix my car’s specific problem?

This module is the definitive solution for problems directly caused by a failing ECM. While it resolves the vast majority of electronic running issues, we always recommend that a proper diagnosis is performed to rule out other potential causes like faulty sensors or wiring.

What is the warranty on this part?

This unit is backed by our one-year replacement warranty. We stand behind the quality and programming of our modules to give you complete confidence in your purchase.

Does this fit vehicles other than the Dodge Caliber?

Yes. This ECM is also the correct fit for the 2007-2010 Jeep Compass and 2007-2010 Jeep Patriot. It covers all engine and transmission options for those models within that year range.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

68043260ab

Interchange part number

PartNumber

590

Model

CALIBER

Year

2007

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top