Programmed 2007-2010 Chrysler Sebring 2.4L Engine Computer | 68046282AD

Get Back on the Road with Confidence

End the frustration of a faulty ECU. This plug-and-play engine computer arrives fully programmed to your vehicle’s VIN, getting your Sebring, Avenger, or Journey running smoothly again without a costly trip to the dealer. Experience restored reliability and peace of mind with a simple installation. Add to cart and get your dependable ride back!

$234.99

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

Restore Your Vehicle’s Performance and Reliability

Is your 2007-2010 Chrysler Sebring, Dodge Avenger, or Journey suffering from frustrating and unpredictable issues? A faulty Engine Control Module (ECM) can be the hidden cause of everything from a persistent check engine light to a car that won’t start at all. Stop guessing and get the definitive solution. This replacement engine computer arrives at your door fully programmed to your vehicle’s specific VIN and mileage, making the repair process as simple and straightforward as possible. Get back on the road with confidence and leave the electrical gremlins behind.

Common Symptoms & Your Direct-Fit Solution

If you’re experiencing any of the following, a failing ECM is a likely culprit. This unit is the direct solution for:

  • Erratic engine performance, including rough idling, stalling, or hesitation.
  • A persistent Check Engine Light with codes like P0601, P0605, or P0606 (Internal Control Module Failure).
  • Complete no-start or intermittent starting conditions.
  • Poor fuel economy and reduced power output.
  • Communication errors with diagnostic scan tools.
  • Unexplained transmission shifting problems or other electronic issues.

Instead of paying for expensive diagnostics and dealership programming, this 2007-2010 Chrysler Sebring 2.4L Engine Computer provides a complete, ready-to-install fix.

Features & Tangible Benefits

  • ✔ Plug & Play Installation: This unit is pre-programmed to your vehicle’s VIN. No extra trips to the dealer or expensive programming tools are required. Simply install it and turn the key.
  • ✔ Guaranteed Compatibility: Engineered to be a direct replacement for a wide range of part numbers, including 68046282AD, 05150472AA, 68046281AC, and more, ensuring a perfect match for your vehicle.
  • ✔ Restored Drivability: Solves common issues caused by a failing computer, restoring smooth idling, crisp acceleration, and proper fuel efficiency.
  • ✔ Cost-Effective Repair: Save hundreds of dollars compared to dealership prices for a new module and the associated programming fees.
  • ✔ Peace of Mind Protection: This unit is backed by our one-year replacement warranty.

An Expert’s Note on Installation: Before installing your new ECM, take a moment to perform a critical check. A leading cause of premature computer failure is a poor electrical ground or voltage spike from a faulty alternator. We strongly recommend ensuring your battery is fully charged and testing your alternator’s output. Also, inspect and clean the main engine and chassis ground connections. A few minutes spent verifying a clean, stable electrical system ensures your new 2007-2010 Chrysler Sebring 2.4L Engine Computer has a long and reliable service life.

Frequently Asked Questions

Is this unit truly “Plug & Play”?

Yes. During checkout, we will ask for your vehicle’s VIN and current mileage. We then flash the computer with this specific data, so it communicates perfectly with your vehicle’s other modules right out of the box. No additional programming is necessary.

How do I find the correct part number on my old computer?

Your original computer will have a sticker with the part number on it. However, this unit replaces dozens of different part numbers. As long as your vehicle is a 2007-2010 Sebring, 2008-2010 Avenger, or 2009-2010 Journey with a 2.4L engine, this is the correct programmed module for you.

Will this fix my car’s specific problem?

This part is a definitive solution for a failed engine computer, which causes the symptoms listed above. While it solves a very common point of failure, we always recommend proper diagnostics to confirm the ECM is the root cause of your issue before ordering.

Do I need to send my old computer (core) back?

No core charge or return is required for this part. You can keep or responsibly dispose of your old module.

What information do you need from me to program it?

We require your vehicle’s 17-digit Vehicle Identification Number (VIN) to ensure the programming is a perfect match for your car’s factory settings and security system. We will prompt you for this information during the checkout process.

By purchasing this 2007-2010 Chrysler Sebring 2.4L Engine Computer, you’re not just buying a part; you’re investing in a reliable, hassle-free solution to get your car running right again.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

68046282AD

Interchange part number

PartNumber

590

Model

SEBRING

Year

2008

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05150472AA 05150518AA 68046281AA 68046281AB 68046281AC 68046281AD, 68046282AA 68046282AB 05187273AD 68046282AC 68046282AD 05187273AA, 05187273AB 05187273AC 05150518AA 05187274AA 05187274AD 05150472AA, 05150518AA 05187271AA 05150472AA 05150518AA 05187272 05187265, 05187266 05187263 05187267 05187269 05187270 05187254, 05187255 05187861 05187251 05187991 05187252 05187992, 05187250 05187990 05187237 05187243 05187236 05187862, 05187239 05187233 05187240 05187232 05187238 05187249

Scroll to Top