Is Your Truck Stalling, Hesitating, or Refusing to Start?
Nothing is more frustrating than a vehicle you can’t depend on. If your GMC Sierra, Chevy Silverado, or another compatible GM vehicle is suddenly stalling, struggling to start, or running rough, a faulty Fuel Pump Control Module (FPCM) is a very common culprit. This critical component regulates the voltage sent to your fuel pump, and when it fails, it can leave you stranded. Don’t guess with your repair; get the definitive solution that restores your truck’s reliability and your peace of mind.
Common Symptoms of a Failing FPCM & Your Direct-Fit Solution
A failing FPCM can often be misdiagnosed as a bad fuel pump, leading to a more expensive and unnecessary repair. Before you replace the pump, check if your vehicle is exhibiting these classic signs of a module failure. This pre-programmed 2007-2009 Sierra 1500 Fuel Pump Control Module is engineered to solve these issues directly.
- Engine stalls unexpectedly, especially while driving
- Hesitation or sputtering during acceleration
- Extended cranking time or complete no-start condition
- Noticeable loss of engine power
- Illuminated Check Engine Light with codes like P069E, P0230, or P025A
Features & Benefits: The Smart Choice for Your Repair
- โ VIN-Programmed for You: We flash the module with the latest GM software using your vehicle’s VIN. This ensures perfect compatibility and function right out of the box, saving you a costly trip to the dealership for programming.
- โ Restores Reliable Starting: By delivering precise voltage to the fuel pump, this module ensures your engine gets the fuel it needs, every time you turn the key.
- โ Direct-Fit Installation: Engineered to match the original factory part, this module mounts in the factory location (typically the driver’s side frame rail) with no modifications needed.
- โ Solves Common DTCs: Specifically designed to clear diagnostic trouble codes related to fuel pump control circuit performance, such as the notorious P069E.
- โ Built for Durability: Constructed with quality components to withstand the harsh under-vehicle environment, providing a dependable, long-lasting repair.
- โ Protected with Confidence: This unit is backed by our one-year replacement warranty.
An Expert’s Insight: Many owners immediately suspect the fuel pump when they face starting or stalling issues. However, on these specific GM trucks and SUVs, the FPCM is a far more frequent point of failure. It’s mounted on the frame rail, exposed to road salt, water, and vibration, which leads to internal corrosion and failure. Replacing the module first is the professional approach. Our pre-programmed 2007-2009 Sierra 1500 Fuel Pump Control Module not only saves you the diagnostic headache but also prevents you from spending hundreds more on a fuel pump you might not even need.
Frequently Asked Questions
Why does this module need to be programmed to my VIN?
The Fuel Pump Control Module communicates with your vehicle’s main computer (ECM). Programming it to your specific Vehicle Identification Number (VIN) ensures it has the correct software and calibration for your truck’s engine, fuel system, and other unique parameters. This step is critical for proper function and prevents compatibility issues.
Is this installation plug-and-play?
Yes. Because we handle the programming for you before shipping, the installation is a simple plug-and-play process. You just need to disconnect the battery, unbolt the old module, plug in the new one, and bolt it into place. No dealership visit is required.
Where is this module located on my truck?
On most compatible trucks and SUVs like the Sierra, Silverado, and Tahoe, the FPCM is located on the driver’s side frame rail, typically near or above the spare tire. It’s important to clean the area before removal to prevent dirt from getting into the connectors.
What happens after I place my order?
After you complete your purchase, you will need to send us your vehicle’s 17-digit VIN. Our technicians will use this to program the module with the latest GM software. Once programming is complete, we will ship the ready-to-install part directly to you.
Will this fix a Check Engine Light with code P069E?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. Replacing the faulty module with this pre-programmed unit is the correct and definitive fix for this code.
Is this the same part as a Fuel Pump Driver Module?
Yes, the terms Fuel Pump Control Module (FPCM) and Fuel Pump Driver Module (FPDM) are often used interchangeably for this component. It serves the same function of controlling the fuel pump’s operation. This 2007-2009 Sierra 1500 Fuel Pump Control Module is the correct part for the vehicles listed.