Is Your Truck Stalling, Hesitating, or Refusing to Start?
Nothing is more frustrating than a vehicle you can’t rely on. If your Sierra, Silverado, Tahoe, or other GM truck is suddenly stalling, cranking but not starting, or throwing a check engine light, a failing Fuel Pump Control Module (FPCM) is a very common culprit. This vital component regulates the voltage to your fuel pump, and when it fails, it starves your engine of the fuel it needs to run properly. Don’t let a small electronic module sideline your entire vehicle. This is the reliable, pre-programmed solution to get you back on the road with confidence.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can manifest in several ways, often leading to misdiagnosis. If you’re experiencing any of the following, this module is your likely solution:
- Engine cranks but will not start
- Vehicle stalls unexpectedly, especially under load or when warm
- Noticeable hesitation or sputtering during acceleration
- Reduced engine power and poor performance
- Check Engine Light with Diagnostic Trouble Codes (DTCs) such as P069E, P0230, or P0606
This isn’t just a replacement part; it’s a complete solution. We professionally program this 2007-2009 Sierra 1500 Fuel Pump Control Module to your vehicle’s specific Vehicle Identification Number (VIN) before it ships. This critical step ensures perfect communication with your vehicle’s computer system, restoring original performance and fuel efficiency.
Features & Tangible Benefits
- โ VIN-Programmed for You: We handle the complex programming, so you receive a part that is truly plug-and-play. This eliminates the need for an expensive trip to the dealership for calibration.
- โ Loaded with the Latest GM Software: Your module arrives with the most current software updates from General Motors, ensuring optimal fuel delivery, efficiency, and longevity.
- โ Restored Engine Performance: By delivering the precise voltage your fuel pump needs, this module restores crisp throttle response and eliminates stalling and hesitation issues.
- โ Direct-Fit OEM Compatibility: Engineered to be a direct replacement for a wide range of part numbers including 20759945, 13501024, 20850907, and more, guaranteeing a hassle-free installation.
- โ Cost-Effective Repair: Avoid the high costs of dealership parts and labor. This is a smart, effective repair that saves you both time and money.
- โ This unit is backed by our one-year replacement warranty for your peace of mind.
Expert Mechanic’s Insight: The Critical Role of VIN Programming
As a technician with over 20 years on the floor, I’ve seen it all. Many people try to save a few dollars by buying a used or un-programmed FPCM from a salvage yard. They install it, and the truck still won’t start, or it runs even worse. Why? Because on these GM platforms, the FPCM is a ‘smart’ module that is coded specifically to the original vehicle’s VIN and options. Installing an un-programmed or incorrectly programmed module is like trying to use the wrong key for a lockโit simply won’t work. Our VIN-programming service isn’t just a convenience; it is the essential step that makes this repair successful. We take the guesswork out of the equation so you can do the job right the first time.
Don’t settle for a vehicle that leaves you stranded. Restore the dependability you need with a properly programmed 2007-2009 Sierra 1500 Fuel Pump Control Module. Simply provide your VIN after purchase, and we’ll handle the rest, shipping you a part that’s ready for installation right out of the box.
Frequently Asked Questions
Why does this module need to be programmed to my VIN?
The Fuel Pump Control Module on these GM vehicles communicates with other computers, like the Engine Control Module (ECM). VIN programming ensures they speak the same language, allowing for correct fuel pressure regulation based on your specific engine, transmission, and other factory options. Without it, the vehicle will not run correctly, if at all.
Where do I provide my VIN?
After you complete your purchase, you will need to send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the part until we have this information to complete the required programming service.
Where is this module located on my 2008 Sierra 1500?
On most GMT900 trucks and SUVs (like the Sierra, Silverado, Tahoe, and Yukon), the FPCM is typically mounted to the frame rail on the driver’s side, often near the spare tire. It’s exposed to the elements, which is a common reason for its failure.
Will this fix a P069E trouble code?
Yes, the DTC P069E (“Fuel Pump Control Module Requested MIL Illumination”) is one of the most common codes indicating a failure of the FPCM. While you should always perform a complete diagnosis, replacing a faulty module with this pre-programmed unit is the definitive fix for that code.
Is this a difficult part to install?
For someone with basic mechanical skills and tools, the installation is straightforward. It typically involves disconnecting the battery, safely raising the vehicle, unplugging the electrical connector, and removing a few bolts. Since our module is pre-programmed, no special electronic tools are needed for the installation.
What happens if I install a module that isn’t programmed?
If you install an un-programmed module, your vehicle’s computer systems will not recognize it. This will result in a no-start condition and will likely set communication-related trouble codes. Our service completely prevents this issue.