Get Your Truck Back on the Road, Fast.
Is your dependable GM truck or SUV suddenly leaving you stranded? An engine that cranks but won’t start, stalls in traffic, or hesitates under acceleration points directly to a failing Fuel Pump Control Module (FPCM). This isn’t just an inconvenience; it’s a critical failure that compromises your vehicle’s reliability. This direct-replacement FPCM is the definitive solution, arriving pre-programmed to your vehicle’s specific VIN, eliminating the need for an expensive trip to the dealership.
Common Symptoms of a Failing FPCM & Your Direct-Fit Solution
A faulty FPCM can mimic other fuel system problems, but it often presents a specific set of symptoms. If you’re experiencing any of the following, it’s highly likely your module has failed. This part is designed to permanently resolve these issues:
- Engine Cranks but Will Not Start: The starter turns, but the engine never fires up due to a lack of fuel pressure.
- Sudden Stalling: The engine cuts out unexpectedly, either at idle or while driving.
- Hesitation and Sputtering: The vehicle struggles to accelerate smoothly, feeling sluggish or jerky.
- Reduced Engine Power: A noticeable loss of power and poor performance, especially when towing or climbing hills.
- Check Engine Light: Common trouble codes include P069E (Fuel Pump Control Module Commanded OFF), P0230 (Fuel Pump Primary Circuit Malfunction), or U0109 (Lost Communication with FPCM).
Installing our 2007-2009 GM Fuel Pump Control Module 13501024 is the most effective way to restore your vehicle’s performance and dependability.
Features & Benefits
- ✔ Plug & Play Installation: This module arrives pre-programmed specifically for your vehicle using the VIN you provide. No dealer flashing or special tools required.
- ✔ Restores Proper Fuel Pressure: Precisely controls the fuel pump to deliver the correct fuel volume, eliminating stalling, hesitation, and no-start conditions.
- ✔ Direct-Fit OE Replacement: Engineered to match the original factory specifications for a perfect fit and flawless connection on your Sierra, Silverado, Tahoe, and more.
- ✔ Wide GM Platform Compatibility: A single, reliable solution that replaces multiple OEM part numbers, including 15213110, 20759945, 20850907, 25866052, and 25967325.
- ✔ Avoid Expensive Dealer Fees: Save hundreds of dollars by bypassing the dealership’s high costs for parts and programming labor.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight: Why These Modules Fail
From my 20 years on the shop floor, I’ve replaced hundreds of these FPCMs. Their failure is almost always due to their location. GM mounted them on the frame rail, where they are constantly exposed to water, road salt, mud, and vibrations. Over time, this combination corrodes the housing and damages the internal circuit board. When you install your new module, I recommend applying a thin layer of dielectric grease to the connector to add an extra barrier against moisture and ensure a long service life. This simple step turns a great repair into a bulletproof one.
Don’t let a faulty module dictate when and where you can drive. By ordering this pre-programmed 2007-2009 GM Fuel Pump Control Module 13501024, you are choosing a reliable, straightforward repair that puts you back in control. Simply provide your VIN after purchase, and we’ll handle the complex programming for you.
Frequently Asked Questions
Why does this module need to be programmed to my VIN?
The Fuel Pump Control Module communicates with your vehicle’s main computer (ECU/PCM) and other systems. Programming it to your specific VIN ensures it has the correct software and calibration to operate seamlessly with your truck’s engine, transmission, and fuel system for optimal performance and efficiency.
How do I provide my VIN after purchase?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We will program the module and then ship it to you. We cannot ship the part until we receive your VIN.
Is this part difficult to install?
For someone with basic mechanical skills, this is a very manageable job. The module is typically located on the driver’s side frame rail, near the spare tire. It’s held on by a few bolts and has one electrical connector. Since our module is pre-programmed, the installation is a simple bolt-off, bolt-on process.
Will this fix a P069E trouble code?
Yes, the P069E code is one of the most common indicators of a failed FPCM. While you should always confirm the diagnosis, replacing a faulty module with this unit is the standard and effective repair for this code.
Is this part the same as a Fuel Pump Driver Module (FPDM)?
Yes, the terms Fuel Pump Control Module (FPCM) and Fuel Pump Driver Module (FPDM) are often used interchangeably. They both refer to the same electronic component that regulates voltage to the fuel pump.
How can I be sure this is the right part for my vehicle?
This 2007-2009 GM Fuel Pump Control Module 13501024 fits a wide range of vehicles listed in the fitment chart. The best way to confirm is to match your original part number to one of the compatible numbers listed (e.g., 20759945, 25866052). If you are unsure, please contact us with your VIN before ordering.