Programmed 2007-2008 Chrysler Sebring ECM | Plug & Play ECU

Get Back on the Road, Hassle-Free

End the stress of an unreliable vehicle. This Plug & Play engine computer for your 2007-2008 Chrysler Sebring arrives programmed to your car’s VIN, eliminating the need for expensive dealer visits. Enjoy a simple installation and the confidence of a smooth-running engine. Restore your peace of mind and order now!

$249.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



Guaranteed Safe Checkout

Finally, A Simple Fix For Your Sebring’s Engine Problems

Is your 2007-2008 Chrysler Sebring or Dodge Avenger acting erratically, stalling, or refusing to start? A failing Engine Control Module (ECM) can bring your daily drive to a grinding halt, causing immense frustration and uncertainty. You’re faced with confusing warning lights, poor performance, and the looming stress of a costly dealership repair. We have the reliable, straightforward solution to get you back on the road with confidence and get your vehicle running like new again.

Common Symptoms & Your Direct-Fit Solution

A faulty ECM can manifest in numerous ways, often mimicking other sensor failures and leading to frustrating, expensive, and incorrect repairs. If you’re experiencing any of the following, a failing computer is the likely culprit:

  • Check Engine Light (CEL) that won’t go away, especially with codes for internal processor failure (e.g., P0601, P0606).
  • Engine Stalling or Misfiring for no apparent reason, creating unsafe driving conditions.
  • Complete No-Start Condition where the engine cranks but will not fire up.
  • Poor Fuel Economy and a noticeable loss of engine power.
  • Communication Errors with diagnostic scan tools.

This Engine Control Module is the definitive fix for these issues. It’s not just a replacement part; it’s a fully programmed, vehicle-specific solution engineered to restore your car’s performance and reliability. As a direct-fit replacement, our 2007-2008 Chrysler Sebring ECM eliminates guesswork and gets the job done right the first time.

Features & Real-World Benefits

  • โœ” Truly Plug & Play Installation: This is our core promise. The unit arrives at your door fully programmed to your vehicle’s specific VIN and mileage. No expensive trips to the dealership for flashing are requiredโ€”simply install it, connect the battery, and turn the key.
  • โœ” Resolves Common Failures: Directly addresses issues like stalling, rough idling, no-start conditions, and persistent Check Engine Lights caused by a faulty original unit.
  • โœ” Guaranteed Compatibility: Engineered to be a perfect match for your 2007-2008 Chrysler Sebring or 2008 Dodge Avenger equipped with the 2.7L or 3.5L engine. It is compatible with all part numbers listed in the vehicle fitment guide.
  • โœ” Restores Factory Performance: By precisely managing the engine’s fuel, spark, and emissions systems, this computer will return your vehicle’s power, responsiveness, and fuel efficiency to original factory specifications.
  • โœ” Peace of Mind Included: This unit is backed by our one-year replacement warranty. Drive with confidence knowing your purchase is protected.

Expert Insight: The ‘Ghost in the Machine’ Solved

We recently worked with a customer whose 2008 Sebring had a persistent P0606 code (ECM Processor Fault) that caused intermittent stalling at traffic lightsโ€”a truly dangerous situation. The owner and his mechanic had replaced multiple sensors with no luck and were quoted over $1200 by the dealer for a new computer and programming. Our pre-programmed 2007-2008 Chrysler Sebring ECM solved the problem in under 30 minutes for a fraction of the cost. Don’t chase ghosts in the machine; a faulty ECM is often the root cause of the most confusing electronic issues.

Frequently Asked Questions

Is this ECM really ‘Plug and Play’?

Absolutely. ‘Plug and Play’ means we program the unit with your car’s specific Vehicle Identification Number (VIN) and mileage before we ship it. When you receive it, you simply install it, and your vehicle’s existing keys will work perfectly. No additional programming or dealer visits are necessary.

What information do you need from me?

After you place your order, we will need your vehicle’s 17-digit VIN and the current mileage. This ensures we can program the module for a seamless, Plug and Play installation.

Will this fix my specific problem?

This module is the guaranteed solution for problems originating from a faulty ECM. While it resolves the vast majority of electronic engine issues, we always recommend having a qualified mechanic diagnose your vehicle to confirm the ECM is the point of failure before ordering.

Do I need to have my keys reprogrammed?

No. On these Chrysler and Dodge models, the security and key information is stored in a separate module (the SKIM or Wireless Control Module), not the ECM. Our programming process ensures the new ECM communicates correctly with your car’s existing security system, so your original keys will work without any changes.

What is the warranty on this part?

This unit is backed by our one-year replacement warranty. Should you encounter any issues with the module itself within one year of purchase, we will provide a replacement.

Stop struggling with an unreliable vehicle. Order your pre-programmed 2007-2008 Chrysler Sebring ECM today and restore your car’s performance and your peace of mind.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

05094721AH

Interchange part number

PartNumber

590

Model

SEBRING

Year

2008

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05033708AD 05033708AE 05033708AF 05094721AA 05094721AB 05094721AC, 05094721AE 05094721AG 05094721AH 05094721AI 05094721AJ 05094721AK, 05094721AL 05094721AM 05094721AN 05150157AH 05094721AO 05094858AA, 05094858AC 05094858AD 05094858AE 05094858AF

Scroll to Top