Programmed 2006 Isuzu I-350 PCM | 12589585 | Engine Computer

$184.95

Get Your Dependable Truck Back

Frustrated with a truck that won’t run right? This pre-programmed Powertrain Control Module for your 2006 Isuzu I-350 is the answer. We flash it to your VIN, so it’s ready for installation, restoring the reliability you count on. End the guesswork and get back on the road with confidence. Order yours now.

Availability: In stock



Expert Programming

VIN-specific programming

1 Year Warranty

3 year upgrade available

Quality Tested

Every module verified

Expert Support

Module Specialists

Is Your Truck Suddenly Unreliable? Get It Back on the Road.

There’s nothing more frustrating than a truck that won’t start, stalls unexpectedly, or runs rough. Your 2006 Isuzu I-350 is a dependable workhorse, but when its brain—the Powertrain Control Module (PCM)—starts to fail, it can leave you stranded. This isn’t just an inconvenience; it’s a major disruption. Stop the guesswork and endless diagnostics. This pre-programmed PCM is the definitive solution to restore your truck’s performance and your peace of mind.

Common Symptoms & Your Solution

A failing engine computer can cause a wide range of confusing issues. If you’re experiencing any of the following, a faulty module is the most likely culprit:

  • Check Engine Light: Persistent Check Engine Light, especially with communication-related Diagnostic Trouble Codes (DTCs) like P0601, P0602, or P0606.
  • No-Start Condition: The engine cranks but refuses to start, even with a good battery and fuel supply.
  • Erratic Performance: Unexplained stalling, rough idling, poor fuel economy, or harsh transmission shifting.
  • Communication Failures: Your scan tool can’t communicate with the PCM, or other modules on the vehicle report a loss of communication.

This replacement 2006 Isuzu I-350 PCM is the direct answer to these problems. We take the hassle out of the repair by programming the unit specifically to your truck’s Vehicle Identification Number (VIN) before it ever leaves our facility. This ensures it communicates perfectly with your vehicle’s existing systems right out of the box.

Features & Benefits

  • VIN-Programmed for Your Truck: We flash the module with your specific VIN and the latest GM software updates, ensuring compatibility and optimal performance.
  • Plug-and-Play Design: Arrives ready for installation, minimizing vehicle downtime and the need for expensive dealership programming.
  • Solves Common Issues: Directly addresses frustrating problems like no-start conditions, poor engine performance, and communication-related error codes.
  • Restores Factory Functionality: Get your truck running exactly as it should, with proper fuel delivery, spark timing, and transmission control.
  • Quality Inspected: Each module is thoroughly inspected to ensure it meets strict quality standards for reliable, long-term operation.
  • Warranty Protection: This unit is backed by our one-year replacement warranty.

An Expert’s Note: We once had a customer with a 2006 Canyon (the I-350’s cousin) who had spent nearly a thousand dollars replacing sensors, spark plugs, and even a fuel pump trying to chase down a random stalling issue. The truck would run fine for days, then die at a stoplight. Frustrated, he finally ordered a pre-programmed PCM from us. After a 15-minute install and a simple security relearn, the problem was gone for good. Don’t chase ghosts in the machine—often, the most complex problems have a simple, central solution. This 2006 Isuzu I-350 PCM is that solution.

Frequently Asked Questions

Do I need to send you my old computer?

No, there is no core charge for this part. You do not need to send your original PCM back to us.

What information do you need from me?

After you complete your purchase, you must provide us with your vehicle’s 17-digit VIN. We cannot ship your order until we receive it, as we need it to program the module correctly for your specific truck.

Is any additional programming needed after installation?

While the main programming is done, you will need to perform a simple security relearn procedure once the module is installed. This process pairs the new PCM to your truck’s anti-theft system and typically takes 10-30 minutes. Instructions can be easily found online or in a service manual.

How do I know if this part number will fit my vehicle?

This PCM, part number 12589585, is a direct replacement for a wide range of original part numbers listed in the description. As long as your vehicle is a 2006 Isuzu I-350, this is the correct computer for your truck. We program it to match your VIN, which handles any minor variations.

What if my original part number isn’t on your list?

The provided list covers the most common compatible part numbers. If your vehicle model and year match the listing, this unit will work. The key is our VIN-specific programming, which ensures it functions correctly as the replacement 2006 Isuzu I-350 PCM.

Weight 2 lbs
Condition

Refurbished

Year

Genuine OEM

Yes

MPN

12589585

Brand

GM

Year

2006

Model

Hardware Type

Interchange part number

Manufacturer Part Number

  • Engine stalling or shutting off while driving
  • Rough or erratic idling
  • Difficulty starting the engine
  • Check Engine Light with internal module error codes (P0601, P0606)
  • No communication with OBD-II scan tool
Please verify your Service Number matches one of the compatible numbers listed in the main description. If unsure, contact us with your VIN.
Shipping: Standard processing is 24-48 hours.

Warranty: All units come with a 1-Year Replacement Warranty.

You May Also Need

  • Placeholder
  • Placeholder
  • Programmed 2002 Sunfire PCM 12210553 Engine Control Module for Cavalier and Grand Am.
  • Front view of the 12210553 Powertrain Control Module for a 2002-2004 Saturn L Series PCM, showing the connection pins.
🚗 My Garage
Scroll to Top