Programmed 2006 Chrysler 300 3.5L AWD ECM | 05094592af | Plug & Play

Get Back on the Road, Hassle-Free

End the frustration of a faulty computer in your 2006 Chrysler 300 or Magnum. This Engine Control Module arrives fully programmed to your car’s VIN—just plug it in and drive. Enjoy restored power and peace of mind with a reliable, easy-to-install solution. Take control of your repair and order now!

$144.95

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

Is your 2006 Chrysler 300 or Dodge Magnum AWD giving you headaches with erratic behavior, stalling, or a complete no-start condition? A failing Engine Control Module can be incredibly frustrating, but you’ve found the reliable, straightforward solution. This module is the brain of your vehicle, and we provide a fully programmed, plug-and-play unit to get you back on the road with confidence and without a costly trip to the dealership.

Common Symptoms & Your Solution

When the original computer in your vehicle begins to fail, it can cause a wide range of confusing issues. You might be experiencing a persistent Check Engine Light, sudden stalling, poor fuel economy, harsh transmission shifting, or a car that simply refuses to start. Often, you’ll see diagnostic trouble codes (DTCs) like P0601 (Internal Control Module Memory Check Sum Error) or other communication-related faults. Our pre-programmed 2006 Chrysler 300 3.5L AWD ECM is the definitive fix, arriving at your door ready for a simple, direct installation that solves these complex electronic problems.

  • âś” Truly Plug & Play: This unit arrives meticulously programmed to your vehicle’s specific VIN and mileage. No extra steps, no expensive dealer visits, and no special tools are required. Just install it and turn the key.
  • âś” Guaranteed Compatibility: A direct replacement for part numbers 05094592af, 04606838ac, 05094133ab, 05094133ad, 4606838ac, and 5094593ab. We ensure a perfect fit and seamless communication for your 2006 300 or Magnum 3.5L AWD.
  • âś” Restore Peak Performance: A properly functioning ECM is essential for precise fuel delivery, ignition timing, and transmission control. You’ll restore the smooth power and crisp response you expect from your vehicle.
  • âś” Smart & Cost-Effective: Avoid the exorbitant costs and programming fees associated with a new dealership unit. This is the intelligent, reliable way to get your car running perfectly again without breaking the bank.
  • âś” Peace of Mind Included: This unit is backed by our one-year replacement warranty. Drive with confidence knowing your investment is protected.

A Veteran Tech’s Note: Many owners try to save a few dollars with a used ECM from a salvage yard, only to find their car still won’t start. That’s because on these Chrysler platforms, the ECM is electronically tied to the original vehicle’s security system (SKIM). Our programming service bypasses this entire headache. We flash the module with your car’s unique VIN, so it communicates perfectly with the other modules right out of the box. It’s the difference between a weekend of frustration and a 15-minute fix. Getting the correct 2006 Chrysler 300 3.5L AWD ECM programmed from the start is the key.

Frequently Asked Questions

How do I provide my VIN number?

It’s simple! Please enter your complete 17-digit Vehicle Identification Number (VIN) in the notes section during checkout, or send it to us in a message after you place your order. We cannot program and ship the module without it.

Is this really ‘plug and play’ with no other programming?

Yes, absolutely. We handle all the programming on our end based on the VIN you provide. Once you receive the ECM, you simply need to disconnect the battery, swap the old unit with this one, and reconnect the battery. No further steps are needed.

Where is the ECM located on my vehicle?

The location is slightly different between the two compatible models. For the 2006 Chrysler 300, the ECM is found in the RH (passenger side) rear of the engine compartment. For the 2006 Dodge Magnum, it is located in the LH (driver side) front of the engine compartment.

Will this fix my specific problem?

This 2006 Chrysler 300 3.5L AWD ECM is the solution for a wide variety of symptoms caused by a faulty computer. However, we always recommend that a proper diagnosis is performed to confirm the ECM is the point of failure. If your vehicle exhibits the symptoms listed above, a faulty module is the most likely cause.

What if my original part number is slightly different?

This unit is a direct replacement for several part numbers, including 05094592af, 04606838ac, 05094133ab, 05094133ad, 4606838ac, and 5094593ab. As long as your vehicle is a 2006 300 or Magnum with the 3.5L AWD engine, this module is the correct fit.

What does the warranty cover?

This unit is backed by our one-year replacement warranty. Should the module fail due to internal defects within one year of the purchase date, we will provide a direct replacement.

MPN

05094592af

Year

Conditions & Options

Programmed to your VIN 4606838AC

Genuine OEM

Yes

Condition

Refurbished

Model

300

Make

Year

2006

Brand

Chrysler

Manufacturer Part Number

, , , , ,

Interchange part number

Scroll to Top