End Your Impala’s Electrical Headaches for Good
Are you dealing with frustrating and unpredictable electrical issues in your Chevrolet Impala? Flickering interior lights, power windows with a mind of their own, a security light that won’t turn off, or even a no-start condition can all point to a failing Body Control Module (BCM). This isn’t just an annoyance; it’s a critical failure that compromises your vehicle’s functionality and your peace of mind. This pre-programmed Body Control Module is the definitive, hassle-free solution to restore your car’s electronic systems to perfect working order.
Common Symptoms & Your Solution
A faulty BCM can cause a cascade of confusing problems. If you’re experiencing any of the following, this module is the likely fix you need:
- Intermittent or non-functional power windows, locks, and mirrors
- Erratic behavior from dashboard gauges or warning lights (including the security light)
- Interior or exterior lights not working correctly
- Remote keyless entry failure
- Engine starting problems or stalling
- Communication issues with diagnostic scan tools
Instead of paying for expensive diagnostic time and programming fees at a dealership, this module arrives at your door ready for installation. We use your vehicle’s VIN to flash the unit with the latest GM software updates, ensuring it integrates seamlessly with your Impala’s existing systems. This is the most efficient way to get your car back on the road and working like new. For a complete solution, we recommend the 2006-2013 Impala Body Control Module.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: This module is not a blank slate. We professionally program it to your car’s specific VIN, eliminating the need for costly and time-consuming dealership programming. It’s a true plug-and-play solution.
- ✔ Restores Full Functionality: Get your power accessories, security system, and lighting working reliably again. End the guesswork and fix the root cause of those electrical gremlins.
- ✔ No Core Charge: Unlike many suppliers, we don’t require you to send back your old, faulty part. This saves you the hassle and expense of a core return.
- ✔ Broad Compatibility: This BCM is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. (See full list below)
- ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty. Drive with confidence knowing you’re covered.
Expert Insight: The BCM is Your Car’s ‘Nervous System’
Think of the Body Control Module as the central hub for all your car’s comfort and convenience features. It doesn’t manage the engine, but it controls almost everything else you interact with daily—from the chime that reminds you to turn off your headlights to the complex logic of the anti-theft system. Over time, heat cycles, vibrations, and electrical shorts can cause internal components on the circuit board to fail, leading to the bizarre issues you’re seeing. Our pre-programming service is a game-changer because it takes the biggest installation hurdle—the software configuration—completely off your plate. This makes a professional-level repair accessible to both DIY mechanics and independent shops, saving hundreds of dollars compared to a typical dealership visit.
Guaranteed Fitment for a Wide Range of GM Vehicles
While this is a perfect fit for the 2006-2013 Impala Body Control Module, it also fits many other GM models. Please verify your part number against the list below. This module replaces the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.
Important Installation Information
After purchasing, please send us your vehicle’s 17-digit VIN to ensure we can program the module correctly before shipment. While this unit is designed to be plug-and-play, some vehicles may require one of the following procedures after installation:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be needed on some models to ensure proper brake light and traction control operation.
Frequently Asked Questions
Do I need to have this programmed by a dealer?
No. The main benefit of our service is that we program the module to your vehicle’s specific VIN before we ship it. This means it arrives ready to be installed, saving you a trip to the dealership and their expensive programming fees.
How do I provide my VIN?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). You can find this on your vehicle’s registration, insurance card, or on the driver’s side of the dashboard visible through the windshield.
What happens if my airbag light comes on after I install it?
This is a known possibility on some GM vehicles. It means the new BCM needs to be electronically ‘introduced’ to the airbag system’s computer (SDM). A qualified mechanic with a high-end diagnostic tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
Is this a brand new part?
This is a high-quality, genuine OEM component that has been thoroughly tested to ensure it meets or exceeds original performance standards. We load it with the newest software from GM for optimal reliability.
Will this fix my car’s no-start problem?
A faulty BCM is a very common cause of no-start issues related to the vehicle’s anti-theft or security system. If your security light is flashing and the engine won’t crank, this programmed 2006-2013 Impala Body Control Module is an excellent place to start your diagnosis and is often the correct fix.