Is Your Chevrolet Impala Experiencing Bizarre Electrical Problems?
Are strange electrical gremlins turning your reliable Impala into a source of constant frustration? Flickering dash lights, power windows with a mind of their own, a security system that randomly acts up, or even a car that refuses to start can all point to one culprit: a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it fails, it can cause a cascade of confusing and seemingly unrelated issues. Stop chasing symptoms and address the root cause with a reliable, direct-fit solution.
Common Symptoms of a Failing BCM & Your Direct Solution
If you’re experiencing any of the following, a faulty BCM is the likely cause:
- Power windows, door locks, or mirrors working intermittently or not at all.
- Interior or exterior lights flickering, staying on, or not turning on.
- The security system engaging randomly or the “Service Theft System” message appearing.
- Erratic behavior from the radio or climate control systems.
- An intermittent no-start condition where the engine cranks but won’t fire up.
This programmed 2006-2013 Impala BCM is the definitive fix for these issues. We take a quality-tested module and program it specifically to your vehicle’s 17-digit VIN before it leaves our facility. This critical step ensures that the BCM communicates perfectly with your car’s existing components, just like the original one did from the factory.
Features & Tangible Benefits
- ✔ VIN-Programmed for Your Vehicle: This module arrives at your door ready for installation. We handle the complex programming, saving you a mandatory and expensive trip to the dealership for setup.
- ✔ Flashed with Latest GM Software: Your BCM is updated with the newest stable software releases from GM. This helps resolve common factory bugs and ensures peak performance and reliability.
- ✔ No Core Charge: You are not required to send your old part back. This saves you time, hassle, and the cost of return shipping.
- ✔ Drive with Confidence: This unit is backed by our one-year replacement warranty.
- ✔ Broad Compatibility: This is a direct replacement for dozens of original equipment part numbers, guaranteeing a perfect match for your vehicle’s system.
An Expert’s Note on BCM Replacement
Many drivers are surprised to learn that you can’t just swap a BCM from another car. These modules are the ‘brain’ for your car’s comfort and security features, and they are electronically locked to the specific vehicle they were built for. In the past, this meant any replacement required a tow to the dealer and several hours of labor for programming. Our service completely changes the game. We perform this essential programming for you, delivering a part that restores your car’s full functionality without the dealership price tag or inconvenience.
Important Post-Installation Information
While this module is programmed for a straightforward installation, some vehicles may require one or more of the following procedures to be performed with a professional scan tool to ensure all systems function correctly:
- Airbag System Sync: If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the systems.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be needed to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Verified Vehicle Fitment
This Body Control Module is a confirmed fit for a wide range of General Motors vehicles. Please verify your part number is on the list below. This part will fit these makes and models with these options:
ACADIA 07-12 Body Control (BCM); (LH dash)
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, or 22860591
CTS 08 Body Control (BCM); RH dash
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 08-12 Body Control (BCM)
EXPRESS 3500 VAN 08-12 Body Control (BCM)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-12 Body Control (BCM); (LH dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
SAVANA 2500 VAN 08-12 Body Control (BCM)
SAVANA 3500 VAN 08-12 Body Control (BCM)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
Frequently Asked Questions
What information do you need to program the BCM?
After you place your order, you will need to provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN). This allows us to program the module with the exact software and configuration for your car’s specific options.
Do I need to send my old BCM back?
No. This product has no core charge, so you can keep your original module. This eliminates the hassle and expense of shipping a core back to us.
Is this a difficult part to install myself?
For someone with moderate mechanical experience, the physical replacement is generally straightforward. The BCM is typically located under the dash. However, as noted above, some vehicles may require post-installation electronic procedures with a scan tool. If you are not comfortable with this, we recommend professional installation.
What happens if my airbag light comes on after installation?
This is a known possibility. It simply means the new BCM needs to be electronically introduced to the airbag system’s Supplemental Deployment Module (SDM). A technician with a capable diagnostic tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
Will this programmed 2006-2013 Impala BCM fix my specific problem?
This module is the correct solution for the vast majority of electronic issues listed in the description. However, proper vehicle diagnosis is always recommended. Issues like faulty wiring or bad sensors can sometimes mimic BCM failure. This part will resolve any issues originating from the BCM itself.
Is any other programming required after I install it?
The main vehicle programming is completed by us before shipping. The only additional steps that might be needed are the relearn procedures mentioned, such as for the airbag system or brake pedal position sensor, which can vary by vehicle.