Programmed 2005 SAAB 9-7X BCM | 9352135 | Trailblazer & Envoy

End Electrical Frustration for Good

Tired of unpredictable electrical issues in your SUV? This VIN-programmed Body Control Module restores full functionality and peace of mind. Arrives ready to install, saving you a trip to the dealer. Get your vehicle running right again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

End Frustrating Electrical Problems in Your GM SUV

Are you tired of dealing with baffling electrical issues in your SAAB 9-7X, Trailblazer, or Envoy? Flickering lights, unresponsive power windows, erratic door locks, or strange warning messages on your dash are classic signs of a failing Body Control Module (BCM). This critical component is the central command for your vehicle’s body electronics, and when it fails, it can make your daily drive a nightmare. This pre-programmed BCM is the direct-fit, reliable solution to restore your vehicle’s proper function and get you back on the road with confidence.

Common Symptoms of a Failing BCM & Your Solution

A faulty BCM can cause a wide range of confusing symptoms that can be difficult to diagnose. If your vehicle is experiencing any of the following, this module is your definitive solution:

  • Power windows, mirrors, or door locks working intermittently or not at all.
  • Interior dome lights or exterior lights staying on or not turning on.
  • The horn sounding randomly or the security light flashing incorrectly.
  • Instrument cluster gauges behaving erratically.
  • Communication errors (DTCs) with other vehicle modules.

Instead of paying for expensive diagnostic time and dealership programming fees, this module arrives flashed specifically for your vehicle. It’s the smart, efficient way to fix these issues and restore your vehicle to its original, reliable state. By providing us with your VIN, you receive a correctly configured 2005 SAAB 9-7X BCM that is ready for installation.

Features & Benefits

  • ✔ VIN-Programmed for Your Vehicle: We flash this module with the latest GM software using your vehicle’s VIN. This ensures perfect compatibility and saves you a costly trip to the dealership for programming.
  • ✔ Direct-Fit Replacement: Engineered to replace original part numbers like 9352135, 15122670, and 15191621, guaranteeing a perfect fit for your Trailblazer, Envoy, Rainier, or 9-7X.
  • ✔ Eliminate Electrical Gremlins: Puts an end to frustrating issues like erratic lights, malfunctioning power accessories, and false warning indicators, restoring your vehicle’s reliability.
  • ✔ No Core Charge Required: You can keep your old BCM, saving you the time, hassle, and expense of shipping a core back to us.
  • ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.

A Technician’s Note on GMT360 BCMs

As a technician who has worked on countless Trailblazers, Envoys, and the unique SAAB 9-7X, I’ve seen firsthand how a failing BCM can mimic a dozen other problems. Owners often chase issues with switches, motors, and wiring, only to find the central BCM is the true culprit. The biggest hurdle was always the programming. Getting a pre-flashed unit like this one is a game-changer. It turns a complex, multi-step repair requiring expensive scan tools into a manageable job for a skilled DIYer or any independent shop. This isn’t just a part; it’s a complete solution that saves you time, money, and a massive headache. A properly working 2005 SAAB 9-7X BCM is key to the vehicle’s overall function.

Important Post-Installation Information

While this module is programmed to your VIN to simplify installation, some vehicles may require additional steps to ensure all systems communicate correctly. Please be aware of the following potential procedures:

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional diagnostic tool. This syncs the new BCM with your vehicle’s airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper brake light function and traction control system performance.

Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Verified Fitment Guide

This BCM is a direct replacement for the following vehicles and part numbers. Please ensure your vehicle is on this list and does not have a factory security system.

  • SAAB 9-7X: 2005
  • CHEVROLET TRAILBLAZER & EXT: 2002, 2003-04 (w/o security), 2005 (w/o security, ID 15122670)
  • GMC ENVOY, XL, XUV: 2002, 2003-04 (w/o security), 2005 (w/o security, ID 15122670)
  • OLDSMOBILE BRAVADA: 2002, 2003-04 (w/o security)
  • BUICK RAINIER: 2004 (w/o security), 2005 (w/o security, ID 15122670)
  • ISUZU ASCENDER: 2003-04 (w/o security), 2005 (w/o security, ID 15122670)

Frequently Asked Questions

Do I absolutely need to provide my VIN?

Yes. Providing your Vehicle Identification Number (VIN) is mandatory. We use it to program the module with the exact software and calibrations for your vehicle’s specific options, ensuring it works correctly right out of the box.

Is this a simple plug-and-play installation?

It is designed to be as close to plug-and-play as possible. Because it comes pre-programmed, you avoid the most difficult step. However, as noted above, some vehicles may require a simple relearn procedure for the airbag or brake pedal position sensor, which requires a professional scan tool.

My vehicle has a factory security system. Will this part work?

This specific module is designed for models originally equipped without the factory security system, as noted in the fitment guide. Please verify your vehicle’s options before ordering to ensure compatibility.

Where is the BCM located on my vehicle?

On most GMT360 platform vehicles like the Trailblazer and Envoy, the BCM is integrated with the rear fuse block, located under the rear driver’s-side seat. For your specific 2005 SAAB 9-7X BCM, always consult a service manual to confirm the exact location and replacement procedure.

What tools are needed for the post-installation procedures?

If your vehicle requires the Airbag System Sync or Brake Pedal Position Relearn, these procedures must be completed with a professional-grade bidirectional diagnostic scan tool. Basic code readers cannot perform these functions.

Conditions & Options

Programmed to your VIN GM: 15122670

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

SAAB 9-7X

Make

Year

2002, 2003, 2004, 2005

Brand

GM

MPN

9352135

Manufacturer Part Number

, , , ,

Scroll to Top