Programmed 2003 Yukon XL 2500 PCM 12581565 | Engine Control Module

Restore Your Truck’s Reliability

Regain confidence in your vehicle with a fully programmed Powertrain Control Module. We flash this computer to your specific VIN, so you can solve those nagging check engine lights and performance problems without a trip to the dealer. Install it, turn the key, and get back on the road with peace of mind. Order today!

$134.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-06724-130 Categories: ,
Guaranteed Safe Checkout

Get Your Truck Back to Peak Performance

Is your truck or van plagued by a persistent check engine light, erratic performance, or a frustrating no-start condition? A failing Powertrain Control Module (PCM) is often the culprit, acting as the brain of your vehicle’s engine and transmission. This replacement module is the definitive solution to restore the power and reliability you depend on. We take the guesswork out of the repair by pre-programming this unit specifically to your vehicle’s VIN with the latest factory software updates. This ensures a seamless installation process, getting you back on the road or to the job site without the hassle and expense of a dealership visit.

Common Symptoms & Your Solution

If you’re experiencing any of the following issues, a faulty engine computer is the likely cause. This module is engineered to resolve them:

  • Persistent Check Engine Light (CEL) with communication codes (U-codes) or PCM processor faults (P06xx codes).
  • Engine misfires, stumbling, or stalling unexpectedly.
  • Harsh or erratic automatic transmission shifting.
  • Reduced fuel economy and overall poor engine performance.
  • Complete no-start condition where the engine cranks but won’t fire up.
  • Failure to pass emissions testing.

Installing our pre-flashed 2003 Yukon XL 2500 PCM 12581565 is the most effective way to permanently fix these complex electronic issues and restore your vehicle’s factory operation.

Features & Benefits

  • ✔ VIN-Programmed for You: Arrives at your door fully programmed to your vehicle’s specific VIN. No extra trips to the dealer for expensive flashing.
  • ✔ Simple Plug-and-Play Installation: Once installed, your vehicle will start and run correctly, with no complicated setup required.
  • ✔ Updated GM Software: We load the latest software available from GM, which can improve performance, shifting, and fuel efficiency over the original programming.
  • ✔ Guaranteed Compatibility: This unit is a direct replacement for a wide range of service numbers, including 12581565, 12576106, 89017733, and more.
  • ✔ Reliability You Can Trust: This unit is backed by our one-year replacement warranty.

An Expert’s Note: Many people try to save a few dollars by pulling a module from a salvage yard, only to find their truck still won’t start. That’s because of the factory anti-theft system (VATS/Passlock). A used module is locked to the original vehicle’s VIN and security key. Our process completely bypasses that headache. By programming the module to your VIN before it ships, we ensure it communicates perfectly with your truck’s existing components, making the repair as straightforward as possible.

Don’t let a faulty computer keep your hard-working vehicle sidelined. This is more than just a part; it’s a complete, reliable solution. By providing your VIN at checkout, you ensure you receive a perfectly matched 2003 Yukon XL 2500 PCM 12581565 that will get you back on the road with confidence.

Frequently Asked Questions

Do I need to do any programming after I install it?

No. This module arrives fully programmed to your VIN and is ready to install. In some cases, a Security/CASE relearn procedure may be required, which can be done without special tools and instructions can be easily found online for your specific model.

How do I provide my VIN?

After you complete your purchase, you will need to send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information.

Where is the PCM located on my vehicle?

The location varies. On many GM trucks and SUVs like the Yukon, Suburban, and Silverado, it’s found in the engine compartment on the driver’s side, often under the battery tray. On vans like the Express and Savana, it’s typically on the driver’s side of the rear engine compartment.

Will this work if my vehicle has modifications?

This module is programmed with standard factory calibration. It is not designed for vehicles with significant performance modifications like aftermarket camshafts, forced induction, or non-stock injectors. It is intended for stock or lightly modified vehicles.

What service numbers does this part replace?

This module is a direct replacement for multiple service numbers, including 12581565, 12570557, 12570558, 12576106, 12576869, 12578127, 88864822, and 89017733, ensuring wide compatibility for your 2003 Yukon XL 2500 PCM 12581565 and other similar GM vehicles.

Conditions & Options

Programmed to your VIN GM: 12576106

Year

Genuine OEM

Yes

MPN

12581565

Interchange part number

Condition

Refurbished

Model

Yukon Xl 2500

Year

2003

Brand

GM

Manufacturer Part Number

, , , , , , , , ,

GTIN

Does not apply

Scroll to Top