Programmed 2001 Sierra 3500 PCM | Restore Your Duramax Power

$544.95

Get Your Workhorse Running Strong Again

Is your reliable Duramax letting you down? Restore the power and dependability you count on with our VIN-programmed engine computer. We handle all the complex programming, so you get a simple plug-and-play part that gets you back to work with confidence. End the guesswork and get back on the road. Add to cart and provide your VIN to order.

Availability: In stock



Expert Programming

VIN-specific programming

1 Year Warranty

3 year upgrade available

Quality Tested

Every module verified

Expert Support

Module Specialists

Is Your Duramax Workhorse Suddenly Unreliable?

There’s nothing more frustrating than turning the key on your 2001 GM HD truck and getting a weak crank, a rough idle, or a dashboard full of warning lights. Your truck is your tool, your partner for the toughest jobs, and when it’s down, everything stops. If you’re experiencing baffling electrical gremlins, poor performance, or a no-start condition that has you stumped, the problem often lies with a failing Powertrain Control Module (PCM). This isn’t just a part; it’s the brain of your entire operation, and we have the direct, pre-programmed solution to get you back on the road with confidence.

Common Symptoms & Your Solution

A faulty PCM can manifest in numerous ways, often mimicking other sensor failures and leading to expensive, time-consuming diagnostic dead ends. If your truck is showing any of these signs, this module is your definitive fix:

  • Complete no-start or intermittent starting issues
  • Harsh or erratic automatic transmission shifting
  • Poor engine performance, hesitation, or stalling
  • Drastically reduced fuel economy
  • Check Engine Light (CEL) with communication codes (e.g., U-codes) or multiple, unrelated sensor codes
  • Problems with the security system or immobilizer

This is a genuine, VIN-programmed 2001 Sierra 3500 PCM, loaded with the latest GM software updates to ensure peak performance and reliability. We take the guesswork out of the repair by programming the unit specifically for your truck before it ever leaves our facility.

Features & Benefits

  • Plug-and-Play Installation: Arrives programmed to your specific VIN. No expensive trips to the dealer for flashing are required. Simply install the unit and turn the key.
  • Restored Engine Performance: Corrects fuel trim, ignition timing, and transmission shift points, bringing back the power and throttle response you depend on.
  • Latest GM Software: We flash each module with the most current vehicle software from General Motors, addressing known bugs and improving overall drivability from the original factory settings.
  • Cost-Effective Solution: Avoid the high costs and programming fees associated with a dealership parts counter. This is a direct path to fixing your truck’s core electronic issues.
  • Direct Fitment: Engineered to be a perfect match for 2001 GMC Sierra & Chevrolet Silverado 2500/3500 HD trucks equipped with the Duramax diesel engine.
  • Peace of Mind: This unit is backed by our one-year replacement warranty.

An Expert’s Note on Duramax Electronics: The early LB7 Duramax trucks are legendary for their power, but their electronics can be sensitive. A failing PCM can cause mechanics to chase their tails, replacing perfectly good injectors or sensors. The root cause is often the central computer’s inability to properly read inputs and send correct commands. By installing a properly programmed 2001 Sierra 3500 PCM with updated software, you’re not just replacing a part; you’re restoring the entire electronic nervous system of your truck, ensuring all components communicate as the engineers intended.

Frequently Asked Questions

Do I need to do any programming myself?

No. This is the primary benefit of our service. We program the 2001 Sierra 3500 PCM to the VIN you provide during checkout. The unit will arrive ready for installation, requiring no additional flashing or dealer intervention.

How do I provide my VIN?

After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is specific to your exact vehicle.

Where is the PCM located on my 2001 Duramax?

On these models, the Electronic Control Module (PCM) is typically located in the engine bay on the driver’s side (LH), positioned under the battery tray.

Will this fix my specific check engine light codes?

This module will correct any codes that are directly caused by a failing PCM, including internal processor faults and communication errors. However, it will not fix codes caused by other faulty mechanical parts or sensors on the vehicle. It is always recommended to have your codes professionally diagnosed if you are unsure of the cause.

Is this compatible with both Silverado and Sierra trucks?

Yes, this part is compatible with the 2001 model year Chevrolet Silverado 2500/3500 and GMC Sierra 2500/3500 pickups, as long as they are equipped with the Duramax diesel engine.

Weight 5 lbs
Condition

Refurbished

Year

MPN

09388505

Genuine OEM

Yes

PartNumber

590

Model

Year

2001

Brand

GM

Manufacturer Part Number

, , ,

Interchange part number

  • Engine stalling or shutting off while driving
  • Rough or erratic idling
  • Difficulty starting the engine
  • Check Engine Light with internal module error codes (P0601, P0606)
  • No communication with OBD-II scan tool
Please verify your Service Number matches one of the compatible numbers listed in the main description. If unsure, contact us with your VIN.
Shipping: Standard processing is 24-48 hours.

Warranty: All units come with a 1-Year Replacement Warranty.

You May Also Need

  • Placeholder
  • Placeholder
  • Programmed 2002 Sunfire PCM 12210553 Engine Control Module for Cavalier and Grand Am.
  • Front view of the 12210553 Powertrain Control Module for a 2002-2004 Saturn L Series PCM, showing the connection pins.
🚗 My Garage
Scroll to Top