Restore Your Vehicle’s Electrical System
Are strange electrical issues turning your reliable GMC Safari, Chevy Silverado, or S10 into a source of constant frustration? Flickering lights, unresponsive power windows and locks, or a security light that prevents your engine from starting are all classic signs of a failing Body Control Module (BCM). Instead of facing a costly and time-consuming trip to the dealership, get the definitive, hassle-free solution. This BCM is the answer to restoring your vehicle’s core functions and getting you back on the road with confidence.
Common Symptoms & Your Solution
A faulty BCM can cause a wide range of baffling problems. If you’re experiencing any of the following, this module is the likely fix:
- Intermittent or non-functional power windows, door locks, or interior lights.
- Erratic gauge cluster behavior or warning lights that stay on for no reason.
- Problems with the anti-theft or security system (e.g., Passlock issues).
- Inconsistent A/C compressor or blower motor operation.
- A no-start condition where the engine cranks but won’t fire up.
This replacement module is precisely programmed to your vehicle’s specific VIN before it ships, ensuring it integrates seamlessly with your existing systems. It’s a direct-fit, effective solution for your 2000 GMC Safari BCM and many other compatible GM models.
Expert Insight: The End of Dealership Programming Headaches
As a technician with over 20 years on the floor, I remember the days when replacing a BCM was a major job. You’d install the part, but the vehicle would be dead in the water until it was towed to a dealership. They were the only ones with the expensive scan tools to program the new module to the vehicle. It meant extra days of downtime and hundreds in programming fees. This pre-programmed module changes the game. We handle the complex part—the programming—on our bench using your VIN. For you, it means the part arrives ready to be installed. It’s the closest you can get to a true plug-and-play repair for a complex electronic component, saving you significant time, money, and hassle.
Features & Benefits
- âś” VIN-Programmed for Your Vehicle: Arrives ready for installation, with the latest GM software updates loaded specifically for your truck or van. No dealership programming required.
- âś” Restores Full Functionality: Directly addresses common electrical failures to get your power accessories, security system, and other body-related functions working correctly again.
- âś” Simple, Hassle-Free Installation: Designed to be a direct replacement for your original module. Once installed, just perform any necessary relearn procedures and you’re good to go.
- âś” No Core Charge: Save money and the inconvenience of shipping your old, faulty part back. You can keep your original module.
- âś” One-Year Replacement Warranty: This unit is backed by our one-year replacement warranty.
Guaranteed Fitment for Your GM Truck, Van, or SUV
This 2000 GMC Safari BCM is a direct replacement for a wide range of vehicles. Please verify that your vehicle and original part number are listed below. This computer will fit the following part numbers: 19153625, 8191536250, 16257125, 191583625, 8093668010, 8162571250, 8191536250, 09366801
BLAZER S10/JIMMY S15 98-00 Body Control (BCM); (center dash), ID 16257125
SAFARI (GMC) 00 Body Control (BCM); (LH dash)
SIERRA 1500 PICKUP 00 Body Control (BCM); (LH dash), ID 16257125
SILVERADO 1500 PICKUP 99 Body Control (BCM); (LH dash)
SILVERADO 2500 PICKUP 00 Body Control (BCM); (LH dash), ID 16257125
SIERRA 2500 PICKUP 99 Body Control (BCM); (LH dash)
BRAVADA 98 Body Control (BCM); (center dash), w/extended build date (opt ZN4)
SILVERADO 1500 PICKUP 00 Body Control (BCM); (LH dash), ID 16257125
SIERRA 2500 PICKUP 00 Body Control (BCM); (LH dash), ID 16257125
ASTRO 00 Body Control (BCM); (LH dash)
ISUZU HOMBRE 99-00 Body Control (BCM); (LH dash)
SILVERADO 2500 PICKUP 99 Body Control (BCM); (LH dash)
SIERRA 1500 PICKUP 99 Body Control (BCM); (LH dash)
Important Post-Installation Information
While we handle the primary programming, some vehicles may require simple on-vehicle relearn procedures after installation. These are standard steps that a technician or knowledgeable DIYer can perform.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure correct brake light operation and traction control performance.
Specific procedures can vary by vehicle. We always recommend consulting a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
Is this BCM really plug and play?
Yes, for the most part. We handle the critical VIN-specific programming before shipping, which means you won’t need a trip to the dealer for programming. However, as noted above, some vehicles may require straightforward on-vehicle relearn procedures for systems like the airbags or brake sensor after the part is installed.
Where is the BCM located on my vehicle?
On most compatible models like the GMC Safari, Chevy Astro, Silverado, and Sierra, the BCM is typically located behind the dashboard on the driver’s side (LH dash). On S10 and Blazer models, it’s often found in the center dash area. Always consult a repair manual for the exact location on your specific vehicle.
How do I provide my VIN?
After you complete your purchase, simply send us a message with your vehicle’s 17-digit VIN. We cannot program and ship your BCM without this information, so please provide it promptly to avoid delays.
What if my original part number isn’t an exact match?
The list of part numbers we provide includes all known interchangeable units for this module family. As long as your original part number is on our list, this module will be the correct replacement for your vehicle.
Will this fix my security light (Passlock) issue?
A failing BCM is a very common cause of Passlock security system problems in these GM vehicles. Replacing it with this properly programmed 2000 GMC Safari BCM is the correct repair for the issue in most cases. However, always ensure your vehicle has been properly diagnosed, as other components like the ignition switch can sometimes cause similar symptoms.
Do I need to send my old BCM back?
No. This purchase comes with no core charge. You can keep, recycle, or dispose of your original module at your convenience.