Tired of Frustrating Electrical Gremlins in Your GM Truck or Van?
Are you dealing with flickering dashboard lights, power windows with a mind of their own, a security system that won’t cooperate, or even a vehicle that refuses to start? These frustrating and unpredictable issues often point to one central culprit: a failing Body Control Module (BCM). Your truck or van is the backbone of your work and daily life, and you can’t afford the downtime. This pre-programmed BCM is the definitive, hassle-free solution to restore your vehicle’s electronic systems and get you back on the road with confidence.
Common Symptoms & Your Solution
A faulty BCM can cause a cascade of confusing problems. If you’re experiencing any of the following, our programmed 15167329 BCM is the reliable fix you need:
- Unresponsive or erratic power windows, door locks, and interior lights
- Warning lights on the dash that come and go without reason
- Problems with the anti-theft or security system (e.g., “Security” light on)
- Intermittent no-start conditions where the engine cranks but won’t fire
- Gauges on the instrument cluster behaving erratically or not working at all
- Communication issues with diagnostic scan tools (DTCs U1000, U1016, etc.)
Instead of paying for expensive diagnostic time and programming fees at a dealership, this module arrives at your door ready for installation. We handle the complex part so you can handle the simple swap.
Features & Benefits
- ✔ Plug & Play Installation: This module is professionally programmed to your vehicle’s specific VIN before shipping. This eliminates the need for any additional programming or trips to the dealer, saving you significant time and money.
- ✔ Updated GM Software: We flash the BCM with the latest, most stable software updates from General Motors. This ensures optimal performance and corrects many of the original factory issues.
- ✔ Restored Functionality: Get your vehicle’s essential electronic accessories working like new again. Regain full control over your windows, locks, lighting, and security features.
- ✔ Broad Compatibility: This BCM is a direct replacement for a wide range of part numbers, including 15194169, 15747545, 15136224, and more, ensuring a perfect match for your Silverado, Sierra, Express, Savana, or SSR.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty. Drive with the assurance that your purchase is protected.
Expert Insight: The Brains of Your Vehicle’s Body
Think of the BCM as the central nervous system for your vehicle’s body and cabin electronics. It doesn’t manage the engine, but it orchestrates nearly everything else—from the chime that reminds you to buckle up to the complex logic that operates your power windows and anti-theft system. When it fails, the symptoms can seem random and unrelated. That’s why replacing it with a properly programmed 15167329 BCM is so critical. Our VIN-matching service takes the guesswork and dealer-level complexity out of the equation, empowering you or your trusted mechanic to perform a reliable repair efficiently.
Frequently Asked Questions
Why do you need my VIN?
Your vehicle’s 17-digit Vehicle Identification Number (VIN) contains crucial information about its specific options and configuration. We use the VIN to load the exact correct software and settings onto the BCM, ensuring it communicates perfectly with the other modules in your truck or van. This makes the installation plug-and-play.
Is this BCM difficult to install?
For most of the listed trucks and vans, the BCM is located under the steering column or in the center dash area. Installation typically involves disconnecting the battery, removing a few trim panels, and swapping the electrical connectors. It is a manageable job for a confident DIYer with basic tools. Always consult a service manual for your specific model’s procedure.
My original part number isn’t 15167329, but it’s on your list. Will this work?
Yes. The additional part numbers listed (like 15194169, 15747545, etc.) are interchangeable. As long as your original module’s part number is on our list, this BCM will be the correct replacement once we program it to your VIN.
What if the airbag light comes on after installation?
In some cases, the new BCM may need to be synced with the airbag system (SDM). This is a simple procedure called “Setup SDM Primary Key in BCM” that can be performed by a repair shop with a professional-grade scan tool. This is only necessary if the airbag warning light is illuminated after the swap.
Do I need to return my old BCM?
No. There is no core charge for this part. You can keep your original module.
Will this fix my specific problem?
This programmed 15167329 BCM is a definitive solution for failures within the module itself. While it resolves the vast majority of the symptoms listed, it’s always essential to ensure your vehicle’s wiring and related components (like switches and motors) are in good working order. Proper diagnosis is key to a successful repair.