Restore Your Vehicle’s Reliability and Power
Is your truck, van, or SUV suddenly stalling, hesitating, or refusing to start? A failing Fuel Pump Control Module (FPCM) is one of the most common causes for these frustrating and stressful issues on GM vehicles. This isn’t just an inconvenience; it’s a critical failure that can leave you stranded. Get your vehicle back on the road with confidence using this direct-fit, professionally programmed GM Fuel Pump Control Module 25785013, flashed with the latest GM software specifically for your vehicle’s VIN.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM, also known as a Fuel Pump Driver Module, can trigger a range of problems that mimic a bad fuel pump. Before you spend hundreds on a pump replacement, check if your vehicle is exhibiting these classic signs of a module failure:
- Engine cranks but will not start
- Sudden stalling while driving, especially when warm
- Engine hesitation or stumbling under acceleration
- Reduced engine power message on the dash
- Check Engine Light with diagnostic trouble codes (DTCs) like P069E, P0230, or P0627
This module is the definitive solution, arriving at your door ready for a straightforward installation. By programming it to your specific VIN, we eliminate the need for an expensive trip to the dealership for coding, saving you both time and money.
Features & Benefits
- ✔ VIN-Programmed for You: Arrives ready for installation with the latest GM software updates, ensuring perfect communication with your vehicle’s computer systems.
- ✔ Restores Proper Fuel Delivery: Corrects erratic fuel pressure and flow, bringing back the consistent performance and starting you depend on.
- ✔ Direct-Fit Replacement: Engineered to match the original form and function for a hassle-free swap. Compatible with part numbers 13501024, 15213110, 20759945, and more.
- ✔ Solve Common DTCs: The primary fix for fuel control module codes like P069E, clearing your check engine light and restoring system integrity.
- ✔ Broad GM Compatibility: A single, reliable solution for a wide range of popular 2007-2009 trucks, vans, and SUVs like the Silverado, Sierra, Tahoe, and Express.
- ✔ Purchase with Confidence: This unit is backed by our one-year replacement warranty.
Expert Insight: The Critical Role of VIN Programming
From over 20 years of diagnostics, I can tell you that simply installing a used or non-programmed module is a recipe for failure. Modern vehicles use a complex network where the Engine Control Module (ECM) and Body Control Module (BCM) must constantly communicate with the FPCM. Our VIN-specific programming ensures this GM Fuel Pump Control Module 25785013 has the exact software calibration your vehicle requires. This prevents compatibility conflicts, ensures the fuel pump receives the precise voltage for all driving conditions, and ultimately delivers a lasting, reliable repair.
Frequently Asked Questions
Why is VIN programming necessary for this module?
VIN programming loads your vehicle’s specific software and calibrations onto the module. This is critical for ensuring it communicates correctly with your vehicle’s other computers and manages fuel pressure according to factory specifications for your exact model, engine, and emissions system. Without it, the vehicle may not start or will run poorly.
Where is this module located on my vehicle?
On most trucks and large SUVs like the Silverado, Tahoe, or Yukon, the FPCM is typically mounted on the driver’s side frame rail, near the spare tire. On other models, it may be on a rear crossmember or in the rear of the engine compartment. Always consult a service manual for your specific vehicle to confirm the location.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded On) is a very strong indicator that the FPCM itself has failed. Replacing the module with this pre-programmed unit is the most common and effective solution for this specific code.
How do I provide my VIN after purchase?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the part until we receive your VIN, as the programming is a required step in our process.
What if my original part has a different number on it?
This module is a direct replacement for a range of part numbers. As long as your original part number is on our compatible list (including 13501024, 20759945, 25866052, etc.), this module will work perfectly for your application.
Is any other work required after installation?
No. Because we pre-program the module to your VIN, no further calibration or dealer visit is required. It is designed to be a plug-and-play installation. We do recommend disconnecting the battery during the installation process for safety.