Restore Your Vehicle’s Performance and Reliability
Are you experiencing frustrating engine stalls, a no-start condition, or a persistent Check Engine Light? A faulty Fuel System Control Module (FSCM) is often the culprit, disrupting the critical communication between your engine computer and the fuel pump. This pre-programmed module is the definitive, hassle-free solution to get your vehicle running smoothly again. We take the guesswork and dealer expense out of the equation by programming this unit specifically to your vehicle’s VIN before it ships. It arrives at your door ready for a straightforward, plug-and-play installation.
Common Symptoms & Your Solution
If your vehicle is exhibiting any of the following symptoms, a failing FSCM is a likely cause. This module is the direct fix for:
- Engine sputtering or stalling, especially under load
- Complete no-start condition where the engine cranks but won’t fire
- Reduced engine power and poor acceleration
- Check Engine Light with Diagnostic Trouble Codes (DTCs) such as P069E, P0230, or P0606
- Inconsistent fuel pressure readings
By replacing your old unit with this professionally programmed 2010-2012 Cadillac CTS Fuel System Control Module, you are restoring the precise fuel delivery your engine needs for optimal performance and efficiency.
Features & Benefits
- ✔ Plug & Play Installation: This module arrives pre-flashed with the latest GM software, matched perfectly to your vehicle’s VIN. No expensive trips to the dealer for programming are required.
- ✔ Restores Engine Performance: Corrects issues caused by a faulty module, eliminating stalling, hesitation, and rough running conditions for a smoother, more responsive drive.
- ✔ Guaranteed Compatibility: Programmed specifically for your vehicle, ensuring seamless communication with your car’s computer systems. Compatible with part numbers 20791901, 20827745, 20877116, and 20850927.
- ✔ Cost-Effective Repair: Save hundreds of dollars by avoiding dealership programming fees and diagnostic charges. This is a smart, efficient solution for both DIYers and professional technicians.
- ✔ Built for Durability: Engineered to meet or exceed original equipment specifications for a long-lasting, reliable repair you can count on.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight: The Brains Behind Your Fuel Pump
Many people think of the fuel pump as a simple on/off device, but in modern vehicles like your GM, it’s far more sophisticated. The Fuel System Control Module acts as a dedicated computer, constantly receiving commands from the Engine Control Module (ECM). It then precisely adjusts the voltage sent to the fuel pump, controlling its speed and the resulting fuel pressure with incredible accuracy. This process is vital for fuel efficiency, emissions control, and engine power. When the FSCM fails, this precise control is lost, leading to the host of problems you might be facing. Installing a properly programmed 2010-2012 Cadillac CTS Fuel System Control Module isn’t just replacing a part; it’s restoring a critical piece of your vehicle’s complex electronic nervous system.
Frequently Asked Questions
Do I need to program this module?
No. The main benefit of our service is that we program the module for you before we ship it. You simply need to provide us with your vehicle’s 17-digit VIN after purchase, and it will arrive ready to be installed.
Where is this module located on my vehicle?
The location varies by model. On many GM trucks and SUVs (like the Silverado, Tahoe, Escalade), it’s mounted on the driver’s side frame rail. On sedans and crossovers (like the CTS, Acadia, LaCrosse), it’s often found in the trunk area or near the rear crossmember. Please consult a service manual for your specific vehicle for the exact location.
How do I provide my VIN?
After you complete your purchase, please send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information for programming.
Is this the same as a Fuel Pump Driver Module (FPDM)?
Yes, the terms Fuel System Control Module (FSCM) and Fuel Pump Driver Module (FPDM) are often used interchangeably for this component. It serves the same function of controlling the vehicle’s fuel pump.
Will this fix a P069E trouble code?
The DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is a very common code indicating a problem with the FSCM itself. While proper diagnosis is always recommended, replacing the module with our pre-programmed unit is the direct and most common solution for this specific code.
Is this a genuine OEM part?
This is a high-quality replacement part that is programmed using genuine GM software updates to ensure it functions identically to the original. It is designed to meet or exceed original equipment standards for a reliable, long-term repair.