Is your truck or SUV suddenly stalling, hesitating under acceleration, or refusing to start? A faulty Fuel Pump Control Module (FPCM) is one of the most common culprits on these GM vehicles. Don’t get stranded or waste money on a costly dealership diagnosis. This module is the reliable, cost-effective solution to get your vehicle back to running like new. We pre-program this unit specifically to your vehicle’s VIN with the latest GM software updates, making it a true plug-and-play fix that you can install with confidence.
Common Symptoms & Your Solution
A failing FPCM can cause a host of frustrating and intermittent issues. If you’re experiencing any of the following, this part is your definitive solution:
- Check Engine Light: Often with codes like P069E, P0230, or P025A.
- No-Start or Hard-Start Condition: The engine cranks but won’t turn over due to a lack of fuel pressure.
- Engine Stalling: The vehicle may stall unexpectedly while driving or at idle.
- Hesitation or Power Loss: You may notice poor acceleration or a feeling of the engine sputtering.
- “Service Fuel System” Message: A clear indicator on your dashboard that the system needs attention.
By replacing your old unit with this professionally programmed 2008-2009 Yukon Fuel Pump Control Module, you are directly addressing the root cause of these problems and restoring your vehicle’s critical fuel delivery system.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: We flash the module to your specific VIN before shipping. This eliminates the need for expensive dealer-only programming tools, saving you hundreds of dollars and a trip to the shop.
- ✔ Plug-and-Play Installation: Because it arrives pre-programmed, you can simply disconnect the old module and plug this one in. It’s a straightforward fix for the confident DIYer or any professional technician.
- ✔ Loaded with Latest GM Updates: Your module will be loaded with the newest software from General Motors, which corrects many of the original factory bugs and improves fuel system performance and longevity.
- ✔ Restores Dependability: Solve dangerous stalling and frustrating no-start issues, giving you the confidence that your truck or SUV will start and run reliably every single time.
- ✔ Guaranteed Compatibility: This unit is a direct replacement for a wide range of original part numbers, including 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.
- ✔ Purchase with Confidence: This unit is backed by our one-year replacement warranty.
An Expert’s Insight on FPCM Failure
As a technician, I’ve seen dozens of these modules fail. They are typically mounted on the vehicle’s frame rail, where they are exposed to constant vibration, heat, and moisture. Over time, this harsh environment causes the internal electronics to break down, leading to the erratic fuel pressure that causes stalling and no-start problems. Simply installing a used module won’t work, as it still needs to be programmed by the dealer. Our solution provides a fresh, updated module that’s already matched to your vehicle—it’s the smartest and most efficient way to perform this repair correctly the first time.
Frequently Asked Questions
Do I need to take this part to a dealer for programming?
Absolutely not. The main benefit of our service is that we handle all the programming for you before the part is shipped. All you need to do is provide us with your vehicle’s VIN during checkout. The module will arrive ready for a simple, plug-and-play installation.
Where is this module located on my vehicle?
On most trucks and SUVs like the Silverado, Sierra, Yukon, and Tahoe, the FPCM is mounted on the driver’s side frame rail, often near the spare tire. On other models, it can be in the rear engine compartment or on a rear crossmember. A quick search for your specific model will confirm its exact location.
What happens if I forget to provide my VIN?
We cannot ship your order until we have your VIN, as the programming is essential for the part to function. After you place your order, we will reach out to you to obtain the VIN if it wasn’t provided. This ensures you receive a part that works perfectly with your vehicle.
Is this the correct part for my vehicle?
This 2008-2009 Yukon Fuel Pump Control Module fits a wide range of GM vehicles listed in the compatibility chart. It is a direct replacement for part numbers 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325. Please verify your part number or contact us if you are unsure.
Can I use a module from another vehicle?
No. A module from another vehicle, even if it’s the same model, will be programmed to that vehicle’s specific VIN and options. It will not work correctly in your vehicle and will likely prevent it from starting. Our VIN-programming service is the only way to guarantee a correct and functional replacement outside of a dealership.