Pre-Programmed 2008-2009 Escalade Fuel Pump Control Module | 25967325

$244.95

Get Back on the Road with Confidence

Tired of your truck or SUV stalling or refusing to start? This pre-programmed 2008-2009 Escalade Fuel Pump Control Module is the reliable fix you need. We flash it to your VIN so it’s ready to install right out of the box. Drive with peace of mind and order now!

Availability: In stock



Expert Programming

VIN-specific programming

1 Year Warranty

3 year upgrade available

Quality Tested

Every module verified

Expert Support

Module Specialists

Restore Your Vehicle’s Reliability and Power

Is your truck or SUV suddenly stalling, hesitating during acceleration, or refusing to start altogether? These are classic signs of a failing Fuel Pump Control Module (FPCM). This critical component regulates the voltage sent to your fuel pump, ensuring your engine gets the precise amount of fuel it needs. When it fails, it can leave you stranded and frustrated. This pre-programmed module is the definitive, hassle-free solution to get you back on the road with confidence.

Common Symptoms & Your Solution

A faulty FPCM can trigger a range of frustrating issues and check engine light codes. If you’re experiencing hard starting, engine sputtering, power loss, or a no-start condition, this part is often the culprit. It’s the primary fix for diagnostic trouble codes (DTCs) like P069E, P0230, and P025A. Instead of paying for expensive diagnostics and programming at a dealership, this module arrives ready for installation, specifically flashed to your vehicle’s VIN. This is the most efficient way to repair your 2008-2009 Escalade Fuel Pump Control Module and restore its performance.

  • Ready to Install: This module arrives pre-programmed to your vehicle’s specific VIN, eliminating the need for an expensive trip to the dealership for flashing.
  • Optimized Performance: Loaded with the latest GM software updates to ensure proper fuel pressure regulation and engine efficiency.
  • Guaranteed Compatibility: A direct replacement for a wide range of original part numbers including 25967325, 20759945, and 13501024, ensuring a perfect fit and function.
  • Solves Common Issues: The definitive solution for stalling, hesitation, no-start conditions, and diagnostic trouble codes related to the fuel system.
  • Purchase with Confidence: This unit is backed by our one-year replacement warranty.

An Expert’s Insight: On many of these GM trucks and SUVs, the FPCM is mounted on the frame rail, exposed to road salt, water, and vibration. This harsh environment leads to corrosion and internal electronic failure over time. For years, replacing it meant towing the vehicle to a dealer for costly programming. Our VIN-matching service changes the game, empowering you or your trusted mechanic to complete the repair efficiently. By installing a precisely programmed 2008-2009 Escalade Fuel Pump Control Module, you’re not just replacing a part; you’re ensuring your fuel system operates exactly as the manufacturer intended.

Frequently Asked Questions

How does the programming process work?

After you place your order, you must provide us with your vehicle’s 17-digit VIN. Our technicians use this information to load the latest, most stable GM-approved software directly onto the module. This ensures it communicates perfectly with your vehicle’s computer system right out of the box.

Where is this module located on my vehicle?

On most compatible models like the Silverado, Tahoe, and Escalade, the FPCM is typically mounted on the driver’s side frame rail, often near the spare tire. It’s a small, silver box with a single electrical connector.

Will this fix a P069E code?

Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed module. Replacing your old unit with this pre-programmed 2008-2009 Escalade Fuel Pump Control Module is the standard and most effective repair for this issue.

Is this a new part?

This is a high-quality, inspected, and tested component that has been professionally programmed to meet or exceed original equipment specifications. It is guaranteed to restore function to your vehicle.

What happens if I don’t provide my VIN?

We cannot ship the module without your VIN. The programming is essential for the part to function in your vehicle. The order will be held until we receive the correct VIN from you.

Do I need special tools for installation?

No special programming tools are required. Installation typically requires basic hand tools, such as a socket set, to unbolt the old module and install the new one. It is a straightforward, bolt-in, plug-in repair.

Weight 3 lbs
Genuine OEM

Yes

Year
Interchange part number

Condition

Seller refurbished

Model

Make

Year

2007

Brand

GM

MPN

25967325

Manufacturer Part Number

, , , , , , ,

GTIN

Does not apply

  • Engine stalling or shutting off while driving
  • Rough or erratic idling
  • Difficulty starting the engine
  • Check Engine Light with internal module error codes (P0601, P0606)
  • No communication with OBD-II scan tool
Please verify your Service Number matches one of the compatible numbers listed in the main description. If unsure, contact us with your VIN.
Shipping: Standard processing is 24-48 hours.

Warranty: All units come with a 1-Year Replacement Warranty.

You May Also Need

  • Placeholder
  • Placeholder
  • Programmed 2002 Sunfire PCM 12210553 Engine Control Module for Cavalier and Grand Am.
  • Front view of the 12210553 Powertrain Control Module for a 2002-2004 Saturn L Series PCM, showing the connection pins.
🚗 My Garage
Scroll to Top