Restore Your Cadillac’s Flawless Performance
Is your Cadillac Escalade EXT experiencing frustrating issues like stalling, hesitation, or a complete failure to start? These are classic signs of a failing Fuel Pump Control Module (FPCM). This critical component regulates the voltage sent to your fuel pump, and when it falters, it can leave you stranded. Don’t settle for unpredictable performance from your luxury vehicle. This direct-replacement FPCM is the definitive solution to restore the power, reliability, and smooth operation you command.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can manifest in several ways, often confusingly intermittent at first. If you’re noticing any of the following, it’s time for a replacement:
- Engine cranks but won’t start
- Stalling, especially under load or when coming to a stop
- Hesitation or sputtering during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or U0109 (Loss of Communication with FPCM)
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and extra expense out of the repair by pre-programming this 2008-2009 Escalade EXT Fuel Pump Control Module to your vehicle’s specific VIN. This means no costly trip to the dealership for programming—it’s ready to go right out of the box.
Features & Tangible Benefits
- ✔ VIN-Programmed for You: Arrives flashed with the latest stable GM software matched precisely to your vehicle. This eliminates the need for expensive scan tools or dealer appointments, saving you time and money.
- ✔ Plug-and-Play Installation: Designed to be a direct-fit replacement for the original module. Simply unbolt the old unit, plug in the new one, and restore proper fuel system function.
- ✔ Resolves Common Failures: The updated software addresses many of the original issues that led to premature failure, ensuring a more durable and reliable repair.
- ✔ Restored Engine Performance: By delivering precise voltage to the fuel pump, this module ensures your engine gets the exact amount of fuel it needs, restoring lost power and throttle response.
- ✔ Wide Compatibility: This module is a direct replacement for a range of part numbers, including 15213110, 20759945, 25967325, and more, ensuring a perfect match.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Insight: Why Pre-Programming is Non-Negotiable
From over two decades in diagnostics, I’ve seen countless vehicle owners replace an FPCM only to have the same no-start problem because the new module wasn’t programmed. On these GM platforms, the FPCM is a ‘smart’ module that communicates with the Engine Control Module (ECM) and Body Control Module (BCM) over the vehicle’s data network. Without being programmed to the vehicle’s specific VIN, it’s essentially an unrecognized component. The vehicle’s security system will prevent it from activating the fuel pump. Our service of programming the 2008-2009 Escalade EXT Fuel Pump Control Module before it ships is the single most important step in ensuring your repair is successful on the first try.
Frequently Asked Questions
Why is VIN programming so important for this part?
On modern GM vehicles, the Fuel Pump Control Module is a security-integrated component. It must be electronically matched to your vehicle’s VIN to be recognized by the onboard computer system. Without programming, the vehicle will not start. We handle this for you, making it a true plug-and-play part.
Is this a difficult part to install?
For someone with basic mechanical skills, this is a very straightforward installation. The module is typically located on the driver’s side frame rail. It involves disconnecting the electrical connector, removing a few bolts, and swapping the unit. Since our module is pre-programmed, no complex computer work is needed after installation.
How do I know if my Fuel Pump Control Module is bad?
Common symptoms include the engine cranking but not starting, stalling, hesitation, and a Check Engine Light with codes like P069E or U0109. A mechanic can confirm by testing for voltage at the fuel pump and checking data communication with a scan tool. Often, the failure of this module is the root cause of these issues.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. Replacing the module with our pre-programmed 2008-2009 Escalade EXT Fuel Pump Control Module is the correct and most effective solution for this specific code.
Where is this module located on my Escalade?
On the 2008-2009 Escalade, Escalade EXT, and ESV, the FPCM is mounted to the vehicle’s frame. You will typically find it on the inside of the driver-side frame rail, roughly below the driver’s door area.
What happens after I place my order?
After you complete your purchase, you will need to provide us with your vehicle’s 17-digit VIN. We cannot ship the part until we have this information. Once we receive your VIN, we will program the module with the latest GM software and ship it to you, typically within one business day.