Get Your Truck Back on the Road with a Reliable, Ready-to-Install FPCM
Is your Avalanche, Sierra, or Tahoe suddenly stalling, hesitating, or refusing to start? A failing Fuel Pump Control Module (FPCM) is one of the most common culprits on these GM trucks and SUVs. When this critical component malfunctions, it disrupts communication with the fuel pump, leading to frustrating and unpredictable engine performance. This isn’t just an inconvenience; it’s a reliability issue that can leave you stranded. You need a solution that’s not only correct but also gets you back on the road quickly and confidently.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can manifest in several ways, often triggering specific Diagnostic Trouble Codes (DTCs). If you’re experiencing any of the following, this module is the definitive solution you’ve been looking for:
- Engine cranks but won’t start
- Sudden stalling while driving, especially at low speeds
- Severe engine hesitation or stumbling under acceleration
- Check Engine Light with codes like P069E, P0230, or P0606
- “Reduced Engine Power” message on the dash
Our expertly prepared 2008-2009 Avalanche 1500 Fuel Pump Control Module arrives at your door pre-programmed to your vehicle’s specific VIN. We use the latest GM software updates to ensure optimal performance and longevity, correcting the issues that may have caused the original part to fail. This is a true plug-and-play solution designed for the vehicle owner who values their time and demands a proper fix.
Features & Tangible Benefits
- ✔ VIN-Programmed for You: This module arrives ready to install, eliminating the need for an expensive trip to the dealership for programming. Just bolt it on and plug it in.
- ✔ Flashed with Latest GM Updates: We load the most current software to improve fuel delivery logic and enhance the module’s durability and performance.
- ✔ Restores Dependable Starts: Puts an end to no-start conditions and the anxiety of wondering if your truck will turn over.
- ✔ Eliminates Stalling & Hesitation: Regain smooth, consistent power delivery and the confidence to merge onto the highway or tow a heavy load.
- ✔ Direct-Fit OE Replacement: Designed to mount in the factory location (typically the driver’s side frame rail) using the original hardware for a straightforward installation.
- ✔ This unit is backed by our one-year replacement warranty.
An Expert’s Insight on FPCM Failure
As a technician, I’ve replaced hundreds of these modules. Their location on the frame rail exposes them to a brutal combination of road salt, water, and constant vibration. This environment corrodes the aluminum housing and compromises the internal electronics over time. The original software was also prone to issues. That’s why getting a 2008-2009 Avalanche 1500 Fuel Pump Control Module that is pre-flashed with the very latest GM software is so critical. It’s not just about replacing the part; it’s about installing a more robust and reliable solution that addresses the original shortcomings, ensuring a lasting repair.
Frequently Asked Questions
Do I need to do any programming or flashing myself?
Absolutely not. The main benefit of our service is that we handle all the programming for you. After you place your order, you provide us with your vehicle’s VIN, and we flash the module with the correct, updated GM software before it ships. It will be ready for installation right out of the box.
Where is this module located on my truck?
For most compatible trucks and SUVs like the Silverado, Sierra, Tahoe, and Suburban, the FPCM is mounted on the driver’s side frame rail, roughly above the rear axle near the spare tire. Always disconnect the battery before beginning replacement.
What happens if I forget to provide my VIN?
Programming is a mandatory step for this part to function in your vehicle. We cannot ship the module until we receive your VIN and complete the flashing process. Please send us your VIN through messaging immediately after purchase to avoid any delays in your order.
Will this fix a P069E trouble code?
Yes, a faulty FPCM is the most common cause of a P069E code (“Fuel Pump Control Module Performance”). Replacing your old module with this pre-programmed 2008-2009 Avalanche 1500 Fuel Pump Control Module is the standard and effective repair for this specific issue.
Is this compatible with other part numbers?
Yes, this module is a direct replacement for a wide range of original part numbers, including 13501024, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.