Get Your Avenger or 200 Running Right Again
Is your 2011 Dodge Avenger or Chrysler 200 suffering from frustrating and unpredictable issues? A faulty Engine Control Module (ECM) can cause a range of problems, from a simple check engine light to a car that won’t start at all. Stop the guesswork and get back on the road with confidence. This engine computer is the straightforward, reliable solution designed to restore your vehicle’s performance and dependability. It arrives at your door fully programmed to your vehicle’s specific VIN and mileage, making installation a true Plug & Play experience. This is the definitive fix for a failing computer in your daily driver.
Common Symptoms & Your Solution
A failing ECM can manifest in many ways. If you’re experiencing any of the following, a faulty module is the likely culprit:
- Persistent Check Engine Light (CEL)
- Engine stalling or shutting off while driving
- Rough or erratic idling
- Noticeable decrease in fuel economy
- Difficulty starting the engine or a complete no-start condition
- Error codes pointing to internal controller failure (e.g., P0601, P0606)
This pre-programmed 2011 Dodge Avenger ECM 68057008AA is the direct solution to these issues. By replacing your old, malfunctioning unit with this fully tested and correctly configured module, you are directly addressing the root cause of the problem, ensuring your vehicle runs as the factory intended.
Features & Benefits
- ✔ Completely Plug & Play: This unit arrives ready for installation right out of the box. No need for expensive dealership programming or special tools.
- ✔ VIN-Specific Programming: We flash the computer with your car’s unique Vehicle Identification Number, ensuring perfect communication with all other vehicle modules.
- ✔ Restored Engine Performance: Eliminate rough idle, hesitation, and poor fuel mileage by installing a properly functioning engine computer.
- ✔ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, including 68057006AA, 68057015AG, and more, ensuring a perfect fit for your 2.4L Avenger or 200.
- ✔ One-Year Protection: This unit is backed by our one-year replacement warranty, giving you confidence in your repair.
Expert Insight: The Programming is Key
Many people assume you can just swap an engine computer from another car. On modern vehicles like your 2011 Avenger, that’s not the case. The ECM is tied to the vehicle’s anti-theft system (immobilizer). An incorrectly programmed module will prevent the car from starting. Our service handles this critical step for you. By programming the unit to your VIN before it ships, we ensure the computer is accepted by your vehicle’s security system, making the installation as simple as swapping the part. This saves you hundreds of dollars and the major headache of getting your car towed to a dealer. The value of a pre-programmed 2011 Dodge Avenger ECM 68057008AA is not just the part, but the hassle-free solution it provides.
Frequently Asked Questions
What does “Plug & Play” really mean?
It means the engine computer is ready for installation immediately upon arrival. We have already programmed it with your vehicle’s specific VIN and mileage. You simply need to disconnect the battery, remove your old ECM, install this one, reconnect the battery, and start the car. No additional programming or dealer visit is required.
How do I know if my ECM is actually the problem?
While the symptoms listed above are strong indicators, the most definitive way is a proper diagnosis from a qualified mechanic. Diagnostic trouble codes like P0601 (Internal Control Module Memory Check Sum Error) or P0606 (ECM/PCM Processor Fault) are direct signs of a failing computer. If you have multiple, unrelated error codes, it can also point to a faulty ECM.
Is this compatible with my specific part number?
Yes. This module is a direct replacement for a long list of part numbers for the 2011 Avenger and 200 with the 2.4L engine. It is compatible with all numbers listed in the product data, including the entire 68057006, 68057008, and 68057015 series. Your 2011 Dodge Avenger ECM 68057008AA will be fully compatible.
What information do you need from me after I order?
After you place your order, we will need your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This information is essential for us to program the module correctly for your specific car.
Do I need to send my old computer (core) back to you?
Please check the specific terms of this sale or contact our customer service. Core return policies can vary, but typically a core return is not required unless specified.
What if I install it and still have problems?
Our ECMs are rigorously tested. If issues persist after installation, it’s possible there is another underlying problem with the vehicle (e.g., a bad sensor, wiring issue, or fuel delivery problem). We recommend re-checking for any other diagnostic codes and ensuring all connections are secure.