Plug & Play 2009-2010 Dodge Journey ECM | Programmed to Your VIN

Get Back on the Road with Confidence

End the frustration of an unreliable vehicle. This Plug & Play Engine Control Module for your 2009-2010 Dodge Journey is your simple, stress-free solution to get your family’s car running smoothly again. It arrives programmed specifically for your vehicle—just install it and go. Regain your peace of mind and dependable transportation. Order now for a fast, simple fix!

$234.99

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

End the Frustration of a Faulty Engine Computer

Is your 2009 or 2010 Dodge Journey giving you headaches? A failing Engine Control Module (ECM) can turn your reliable family vehicle into a source of constant stress, leaving you stranded with a car that won’t start, runs poorly, or throws confusing check engine lights. Don’t let intermittent stalling, rough idling, or poor fuel economy disrupt your life. This is your direct, hassle-free solution to restore your vehicle’s performance and get back on the road with confidence. This module is the brain of your engine, and we provide a fully programmed, ready-to-install replacement that eliminates the need for an expensive trip to the dealership.

Common Symptoms & Your Solution

If you’re experiencing any of the following issues, a failing computer is the most likely culprit. This pre-programmed 2009-2010 Dodge Journey ECM is engineered to be the definitive fix for these problems:

  • Check Engine Light: Persistent Check Engine Light, especially with communication error codes or internal processor fault codes (like P0601, P0605, or P0606).
  • No-Start Condition: The engine cranks but refuses to start, even with a good battery and starter.
  • Stalling and Rough Idle: Your Journey may stall unexpectedly at stops or idle erratically for no apparent reason.
  • Poor Performance: Noticeable loss of power, hesitation during acceleration, and a significant drop in fuel efficiency.
  • Transmission Issues: Harsh or incorrect shifting, as the ECM plays a critical role in communicating with the transmission controller.

Features & Benefits: The Smart, Simple Choice

  • ✔ Truly Plug & Play: This unit arrives at your door fully programmed to your vehicle’s specific VIN and mileage. No extra trips to the dealer for costly flashing are required.
  • ✔ Guaranteed Compatibility: We ensure this module is flashed with the latest OEM-approved software for your 2009-2010 Dodge Journey, Avenger, or Sebring with the 2.4L engine.
  • ✔ Restores Peak Performance: By replacing your faulty computer, you restore crisp engine response, smooth shifting, and original fuel economy.
  • ✔ Cost-Effective Solution: Save hundreds of dollars compared to dealership prices for a new module and the separate programming fees they charge.
  • ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty. Drive with confidence knowing you’re covered.

An Expert’s Note on Installation: As a technician, I’ve seen the frustration firsthand when a customer is told their car’s “computer is bad.” It sounds complicated and expensive. The beauty of a pre-programmed 2009-2010 Dodge Journey ECM like this one is that it transforms a complex job into a straightforward one. You’re not just buying a part; you’re buying a complete solution that bypasses the dealership’s most expensive tool: their programming computer. For a DIYer or an independent shop, this is the key to an efficient, successful, and affordable repair.

Frequently Asked Questions

Is this ECM really “Plug & Play”?

Absolutely. We use the VIN you provide during checkout to flash the module with your vehicle’s exact software and security information. Once you receive it, you simply disconnect the battery, swap the old module with the new one, and reconnect the battery. No further programming is needed.

What information do you need from me to program it?

We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your driver’s side dashboard (viewable through the windshield) or on your vehicle’s registration or insurance card.

Will this fix my check engine light?

If the check engine light is caused by an internal failure of the original ECM (common codes include P0601-P0606), then this replacement module will solve the problem. It’s crucial to ensure the underlying issue is the ECM and not a separate sensor or wiring problem.

Does this fit vehicles other than the Dodge Journey?

Yes, this specific module is also the correct computer for 2009-2010 Dodge Avenger and 2009-2010 Chrysler Sebring models equipped with the 2.4L engine. It is compatible with a wide range of part numbers, ensuring a perfect match.

What is the warranty on this part?

This unit is backed by our one-year replacement warranty. This gives you confidence and protection for your purchase.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

68046282AD

Interchange part number

PartNumber

590

Model

JOURNEY

Year

2008

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05150472AA 05150518AA 68046281AA 68046281AB 68046281AC 68046281AD, 68046282AA 68046282AB 05187273AD 68046282AC 68046282AD 05187273AA, 05187273AB 05187273AC 05150518AA 05187274AA 05187274AD 05150472AA, 05150518AA 05187271AA 05150472AA 05150518AA 05187272 05187265, 05187266 05187263 05187267 05187269 05187270 05187254, 05187255 05187861 05187251 05187991 05187252 05187992, 05187250 05187990 05187237 05187243 05187236 05187862, 05187239 05187233 05187240 05187232 05187238 05187249

Scroll to Top