2013-2014 Volt Fuel Pump Module 22874300 | Programmed to Your VIN

Restore Your Volt’s Fuel System Performance

Fix stalling and no-start problems with this VIN-programmed Fuel Pump Control Module for your 2013-2014 Chevy Volt. It arrives ready to install with the latest GM softwareโ€”no dealer visit needed! Get back on the road fastโ€”order yours today!

$244.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-07668-34 Categories: ,
Guaranteed Safe Checkout

Is Your 2013-2014 Chevy Volt Stalling, Hesitating, or Refusing to Start?

As a technician with over two decades of experience under the hood, I’ve seen countless vehicles towed into my bay with fuel delivery issues. A common culprit on modern GM vehicles, especially the 2013-2014 Volt, isn’t the fuel pump itself, but the small computer that controls it: the Fuel Pump Control Module (FPCM), also known as a Fuel System Control Module (FSCM). When this module fails, it can starve your engine of fuel, leading to frustrating and unpredictable problems like engine sputtering, a check engine light, or a complete no-start condition.

“A customer’s 2014 Cruze came in last week with a persistent P0230 code (Fuel Pump Primary Circuit Malfunction) and intermittent stalling. They had already spent hundreds replacing the in-tank fuel pump, but the problem remained. After a quick inspection, I found the real issue: the FPCM, mounted in the right rear quarter panel, had its connector pins showing signs of green corrosion from moisture intrusion. We replaced the module, cleaned the connector, and the car ran perfectly. It’s a classic case of misdiagnosis that I see all the time.”

The Dealership-Free Solution: A True Plug-and-Play Module

The biggest headache with replacing an FPCM has always been the mandatory, and often expensive, trip to the dealership for programming. We eliminate that step entirely. This module, part number 22874300, is not just a replacement part; it’s a complete solution. We use your vehicle’s Vehicle Identification Number (VIN) to flash the module with the latest, most stable software directly from GM before it ever leaves our facility. When it arrives at your door, it’s ready for immediate installation.

Key Benefits of This VIN-Programmed Module:

  • โœ” Eliminate Guesswork: Solves common fuel-related issues like hesitation, long crank times, stalling, and certain check engine light codes.
  • โœ” No Dealer Programming Required: We handle the complex software flashing for you, saving you time and hundreds of dollars in dealer fees.
  • โœ” Latest GM Software: Your module arrives with the newest updates, ensuring optimal performance and reliability.
  • โœ” Restored Performance: A new, properly functioning 2013-2014 Volt Fuel Pump Module ensures your fuel pump receives the correct voltage for precise fuel pressure under all driving conditions.
  • โœ” Direct-Fit Guarantee: Engineered to be a direct replacement for the original part, ensuring a perfect fit and function. It is a compatible replacement for part numbers 22874299 and 22874300.

Plug-and-Play Installation: Get Your Volt Running Right

You don’t need to be a master mechanic to install this part. With basic tools, you can have your vehicle back on the road in under an hour.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s 12V battery before starting any electrical work.
  2. Access the Module: On the Chevy Volt, the FPCM is located behind the trim panel in the right-hand inner quarter panel area of the trunk/hatch.
  3. Swap the Part: Carefully unplug the electrical harnesses from the old module. Unbolt it from the vehicle body and set it aside.
  4. Install the New Module: Mount your new, pre-programmed module in the same location. Securely plug in the electrical connectors, making sure they click into place.
  5. Final Steps: Reinstall any trim panels you removed. Reconnect the negative battery terminal. Turn the ignition to the ‘ON’ position (without starting) for 10 seconds to allow the system to prime, then start your engine.

Is This the Right Part for Your Vehicle?

This Fuel Pump Control Module is a confirmed fit for a wide range of GM vehicles. Please verify your make, model, and year from the list below. After purchase, simply provide us with your VIN, and we’ll handle the rest.

This part will fit these makes and models with these options:

  • 2013-2014 Buick Encore: Fuel Pump; (RH inner quarter panel)
  • 2013-2014 Buick Verano: Fuel Pump; (RH inner quarter panel)
  • 2013-2014 Cadillac XTS: Fuel Pump; (right rear quarter panel)
  • 2014 Chevrolet Camaro: Fuel Pump; 3.6L (VIN 3) or 6.2L (VIN J)
  • 2014 Chevrolet Caprice: Fuel Pump
  • 2013-2014 Chevrolet Cruze: Fuel Pump; (RH inner quarter panel), ID 22874300
  • 2014 Chevrolet Impala: Fuel Pump; VIN 1 (new style)
  • 2013 Chevrolet Orlando: Fuel Pump; (RH inner quarter panel)
  • 2013-2014 Chevrolet Sonic: Fuel Pump; (RH inner quarter panel)
  • 2013-2014 Chevrolet Trax: Fuel Pump; (RH inner quarter panel)
  • 2013-2014 Chevrolet Volt: Fuel Pump; (RH inner quarter panel)
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2013 – 2014

Make

Model

VOLT

Brand

GM

MPN

22874300

Manufacturer Part Number

,

Manufacturer Warranty

1 Year

Scroll to Top