2013-2014 Verano Fuel Pump Module 22874300 Programmed to Your VIN

Restore Your Verano’s Performance!

Fix stalling, hesitation, and no-start problems with this Fuel Pump Control Module. It arrives fully programmed to your vehicle’s VIN for a simple, plug-and-play installationโ€”no dealer visit required! Fix your issue today!

$244.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-07668-36 Categories: ,
Guaranteed Safe Checkout

Is Your Verano Stalling, Hesitating, or Refusing to Start?

If you’re experiencing sudden engine stalls, rough idling, or a frustrating crank-no-start situation, a failing Fuel Pump Control Module (FPCM) is one of the most common culprits. Over my 20+ years in the shop, I’ve seen this exact issue on dozens of GM vehicles like your Verano. This small but critical module is responsible for delivering the precise voltage your fuel pump needs to operate. When it fails, it starves your engine of fuel, leading to unpredictable and unsafe driving conditions. You might also see a Check Engine Light with codes like P069E or P0230.

A Technician’s Real-World Experience

“A customer’s 2014 Cruze came in last week with these exact symptomsโ€”it would crank all day but never fire up. He had already spent money replacing the in-tank fuel pump, assuming that was the problem. After a quick diagnostic check, I found the Fuel Pump Control Module wasn’t sending any power out. The real culprit was this module, a common failure point due to heat cycles and vibration. We installed a pre-programmed unit just like this one, and the car started on the first try. He could have saved himself hundreds of dollars and a lot of frustration by starting here.”

The Simple, Dealer-Free Solution

Forget the hassle and expense of a dealership visit. This is a direct-fit replacement Fuel Pump Control Module, part number 22874300, that arrives at your door ready for installation. The biggest advantage? We flash it with the latest GM software specifically for your vehicle’s VIN before we ship it. This means no extra programming, no special tools, and no trip to the dealer. It’s a true plug-and-play fix.

Why Our Programmed 2013-2014 Verano Fuel Pump Module is the Right Choice:

  • โœ” VIN-Specific Programming Included: We handle the complex programming for you, ensuring perfect communication with your vehicle’s computer systems.
  • โœ” Eliminates Common Symptoms: The most effective way to resolve issues like stalling, hesitation, long crank times, and no-start conditions related to fuel delivery.
  • โœ” Direct-Fit Replacement: Guaranteed to fit and function just like the original part, making the swap straightforward. Compatible with part numbers 22874299 and 22874300.
  • โœ” Save Time and Money: By skipping the dealership’s diagnostic and programming fees, you save hundreds of dollars and get your car back on the road faster.

Plug-and-Play Installation: No Dealer Visit Required

You can install this module yourself with basic hand tools. On the 2013-2014 Verano, the module is typically located behind the trim panel in the right-hand (passenger side) rear quarter panel area.

  1. Safety First: Disconnect the negative terminal from your car’s battery.
  2. Access the Module: Carefully remove the interior trim panels in the right rear of the trunk/cargo area to expose the FPCM.
  3. Disconnect and Remove: Unplug the electrical connector(s) from the old module. Then, unbolt it from the vehicle body.
  4. Install the New Module: Bolt your new, pre-programmed module into place.
  5. Reconnect: Securely plug the electrical connector(s) into the new FPCM. You should hear a click.
  6. Final Steps: Reinstall the interior trim panels and reconnect the negative battery terminal. Cycle the key to the ‘On’ position for 10 seconds before starting to allow the system to initialize.

Expert Pro Tip: Check Your Connections

Before plugging in your new module, take a moment to inspect the vehicle’s wiring harness connector. Look for any signs of discoloration, melting, or corrosion on the pins. A poor connection is a primary cause of repeat module failure. If you see any damage, cleaning the terminals with a dedicated contact cleaner or replacing the connector pigtail is a crucial step to ensure a long-lasting repair.

Guaranteed Fitment for a Wide Range of GM Vehicles:

This module is the correct solution for the following models:

  • 2013-2014 Buick Encore
  • 2013-2014 Buick Verano
  • 2014 Cadillac XTS
  • 2014 Chevrolet Camaro (3.6L & 6.2L)
  • 2014 Chevrolet Caprice
  • 2013-2014 Chevrolet Cruze (ID 22874300)
  • 2014 Chevrolet Impala (New Body Style)
  • 2013 Chevrolet Orlando
  • 2013-2014 Chevrolet Sonic
  • 2013-2014 Chevrolet Trax
  • 2013-2014 Chevrolet Volt

To ensure a perfect repair, please provide your 17-digit VIN during checkout or by sending us a message after your purchase. We cannot ship your part until we have programmed it.

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2013 – 2014

Make

Model

Verano

Brand

GM

MPN

22874300

Manufacturer Part Number

,

Manufacturer Warranty

1 Year

Scroll to Top