Is Your 2010 Yukon Experiencing Bizarre Electrical Problems?
If your GMC Yukon is suffering from strange and unpredictable electrical issues, a failing Body Control Module (BCM) is the most likely culprit. The BCM acts as the central nervous system for your vehicle’s body electronics, managing everything from power windows and locks to the security system and interior lighting. When it starts to fail, it can create a host of frustrating problems that seem unrelated.
This is a direct replacement Body Control Module, delivered to you pre-programmed to your vehicle’s specific VIN. We install the latest software updates from GM, ensuring optimal performance and compatibility. Simply provide us with your VIN after purchase, and we’ll handle the programming before shipping. This eliminates the need for expensive dealership programming and gets you back on the road faster.
From the Diagnostic Bay
We had a 2010 Yukon in the shop that was driving the owner crazy. The radio would turn off randomly, the driver’s side window would only work intermittently, and the anti-theft light would flash for no reason. The owner had already replaced the battery and checked all the fuses. After connecting our scan tool, we saw multiple communication fault codes pointing to the BCM. We installed a VIN-programmed module just like this one, and instantly, all the electrical gremlins vanished. It’s a perfect example of how a single failing module can cause widespread, confusing symptoms.
Common Symptoms of a Failing BCM
- ✔ Power windows, door locks, or mirrors behaving erratically or not working at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system engaging randomly or preventing the vehicle from starting.
- ✔ Dashboard warning lights appearing without a clear cause (e.g., ‘Service 4WD’ or ‘Service Stabilitrak’).
- ✔ Intermittent no-start conditions where the engine cranks but won’t fire up.
- ✔ Radio or climate control system malfunctions.
Why Choose Our Pre-Programmed 2010 Yukon Body Control Module?
This isn’t just a replacement part; it’s a complete solution. By programming the module to your VIN before it leaves our facility, we save you a trip to the dealership and the high costs associated with their programming services. This 2010 Yukon Body Control Module is tested for full functionality and is ready for installation upon arrival. Plus, with our no-core-charge policy, you can keep your original module without any extra fees.
Installation and Post-Install Procedures
While this module is designed for a straightforward installation, some vehicles may require additional steps to ensure all systems communicate correctly after the new BCM is installed. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This BCM is a direct replacement for a wide range of GM vehicles and part numbers. Please verify your original part number against the list below to ensure compatibility.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your vehicle responsible for managing and monitoring various electronic accessories, such as power windows, locks, lights, wipers, and the security system. It’s the command center for your vehicle’s body electronics.
How do I provide my VIN for programming?
After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship your part until we receive the VIN, as the programming is essential for the module to function in your vehicle.
Is this part truly plug-and-play?
For most vehicles, yes. Because we pre-program it to your VIN, it should function upon installation. However, as noted, some vehicles may require a simple relearn procedure for the airbag or brake pedal position sensor, which may require a professional scan tool.
What happens if my airbag light comes on after installation?
This indicates the new BCM needs to be electronically ‘introduced’ to the airbag system’s computer (SDM). A qualified technician with a high-end diagnostic tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
Do I need to return my old BCM?
No. There is no core charge for this part. You can keep your original module.