Get Your Hummer Back on the Road, Fast.
Is your 2009 Hummer H3 cranking but not starting, stalling unexpectedly, or showing a check engine light? A failing Fuel Pump Control Module (FPCM) is one of the most common causes for these frustrating and potentially dangerous issues. Don’t let a small electronic component sideline your capable SUV. This direct-fit 2009 Hummer H3 Fuel Pump Control Module is the definitive solution, arriving at your door pre-programmed and ready for a straightforward installation.
Common Symptoms & Your Solution
If you’re experiencing any of the following, a faulty FPCM is the likely culprit. This module is engineered to resolve these exact problems:
- Engine Cranks, But Won’t Start: The module isn’t commanding the fuel pump to turn on.
- Sudden Stalling: The engine may stall while driving or at idle due to inconsistent fuel pressure.
- Loss of Power & Hesitation: Incorrect voltage to the fuel pump can starve the engine of fuel under load.
- Check Engine Light with DTCs: Look for codes like P069E, P0230, or P0606, which point directly to a fault in the fuel pump control circuit.
By replacing your old unit with this pre-flashed module, you’re not just swapping a part—you’re restoring the core reliability of your vehicle’s fuel delivery system.
Features & Benefits
- ✔ No Dealer Visit Required: This module is professionally programmed to your vehicle’s specific VIN before shipping. This bypasses the need for expensive programming tools or a trip to the dealership.
- ✔ Plug-and-Play Installation: Because it’s pre-programmed, installation is as simple as locating the old module, disconnecting it, and plugging this one in.
- ✔ Updated GM Software: We flash each module with the latest stable software updates from GM, which often correct the original issues that led to failure.
- ✔ Restored Engine Performance: Ensure your fuel pump receives the precise voltage it needs for consistent fuel pressure, a smooth idle, and full power on demand.
- ✔ Wide Compatibility: This unit directly replaces a range of original part numbers, including 13501024, 15213110, 20759945, 25785013, 25854536, 25866052, and 25967325.
- ✔ Guaranteed Performance: This unit is backed by our one-year replacement warranty.
From the Technician’s Bench: We see these FPCMs fail constantly in the shop, especially on trucks and SUVs. The module is often mounted on the frame rail, where it’s exposed to water, salt, and vibrations. Over time, corrosion works its way into the housing and onto the circuit board, causing erratic behavior. Many people mistakenly replace the fuel pump itself, only to find the problem persists. The real issue is almost always this control module. Replacing it with a unit that has the latest software, like this one, is the correct and permanent fix.
Frequently Asked Questions
Why do I need to provide my VIN?
Your vehicle’s Vehicle Identification Number (VIN) allows us to program the module with the exact software and calibrations specific to your Hummer H3’s engine, transmission, and other factory options. This ensures perfect compatibility and function right out of the box.
Is this part difficult to install?
For the 2009 Hummer H3, the FPCM is typically located on the rear frame crossmember. Installation is generally straightforward for someone with basic mechanical skills. It involves disconnecting the battery, unplugging the electrical connector, and removing a few bolts. However, if you are not comfortable working under your vehicle, we always recommend professional installation.
Will this fix a check engine code P069E?
Yes. Diagnostic Trouble Code P069E (Fuel Pump Control Module Commanded Performance) is the most common code indicating a failure of the 2009 Hummer H3 Fuel Pump Control Module. This part is designed to be the specific solution for that code.
What happens if I don’t replace a failing FPCM?
Continuing to drive with a faulty FPCM can lead to unpredictable stalling, which is a significant safety hazard. It can also cause the vehicle to not start at all, leaving you stranded. Over time, it can also put extra strain on the in-tank fuel pump.
Is this the same part used on a Silverado or Tahoe?
Yes, this FPCM is used across a wide range of GM trucks and SUVs from this era, including the Silverado 1500, Tahoe, Suburban, GMC Sierra, Cadillac Escalade, and more. Our VIN programming ensures it works perfectly for your specific model.