Is Your HUMMER H3 Cranking But Not Starting, Stalling, or Hesitating?
There’s nothing more frustrating than a vehicle as capable as your H3 refusing to run right. If you’re experiencing sudden stalls, a long crank time before the engine fires up, or a complete no-start condition, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This critical component regulates the voltage to your fuel pump, and when it fails, it starves your engine of the fuel it needs to run. Don’t let a small electronic box sideline your adventures. This is the direct, reliable solution to get you back on the road and trail with confidence.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can mimic other issues, but it often triggers specific symptoms and diagnostic trouble codes (DTCs). If you’re noticing any of the following, it’s time to replace your module:
- Engine cranks but will not start
- Vehicle starts and then immediately stalls
- Hesitation or stumbling under acceleration
- Noticeable loss of engine power
- Check Engine Light with codes like P069E, P0230, or P0606
This 2009 HUMMER H3 Fuel Pump Control Module is your definitive fix. We take the guesswork and hassle out of the repair by pre-programming the unit to your vehicle’s specific VIN before it ships. This means no expensive trip to the dealership for programming is required. It’s ready for installation right out of the box, restoring your H3’s performance and reliability.
Features & Benefits
- ✔ VIN-Programmed for Your H3: We flash the module with the latest GM software matched directly to your vehicle’s VIN. This ensures perfect compatibility and function without any additional programming.
- ✔ Restores Engine Performance: A new, properly functioning module ensures your fuel pump delivers the precise pressure required for optimal power, throttle response, and fuel efficiency.
- ✔ Direct-Fit Replacement: Engineered to match the original factory part (OEM part number 25967325 and others), guaranteeing a straightforward installation with no modifications needed.
- ✔ Solves Common Failure Points: Built to withstand the harsh conditions under your vehicle, addressing the common heat and vibration-related failures of the original unit.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Insight: The DIYer’s Advantage
From my 20 years in the garage, I’ve seen countless drivers get stuck with a part that needs dealership-only programming. It turns a simple repair into a costly, inconvenient ordeal involving tow trucks and high labor bills. That’s what makes this pre-programmed 2009 HUMMER H3 Fuel Pump Control Module a game-changer. By handling the complex programming for you, we empower you or your trusted mechanic to complete the job efficiently. This module is often located on the frame rail, exposed to the elements. Replacing it isn’t just about fixing a problem; it’s about installing a reliable part that gives you peace of mind wherever you drive.
Frequently Asked Questions
Do I need to program this module after I receive it?
No. This is the primary benefit of our service. We program the 2009 HUMMER H3 Fuel Pump Control Module to the specific VIN you provide during checkout. It will arrive at your door ready to be installed.
Where is this module located on my 2009 HUMMER H3?
On the HUMMER H3, the Fuel Pump Control Module is typically mounted on the rear frame crossmember. Always consult a service manual for your specific vehicle to confirm the exact location before beginning installation.
What VIN do I need to provide?
Please provide the 17-digit Vehicle Identification Number (VIN) found on your vehicle’s driver-side dashboard (visible through the windshield) or on the sticker in the driver-side door jamb. Accuracy is crucial for correct programming.
Is this part compatible with other part numbers?
Yes, this module is a direct replacement for a wide range of original part numbers, including: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.
What happens if I forget to provide my VIN?
We cannot ship your order without a VIN. Programming is an essential step to ensure the part works with your vehicle. We will contact you after your purchase to remind you, but providing it at checkout will ensure the fastest possible processing and shipping.