Restore Power and Reliability to Your HUMMER H3
Is your 2009 HUMMER H3 experiencing frustrating issues like stalling, hesitation during acceleration, or a complete no-start condition? Before you consider replacing the entire fuel pump, the culprit is often a faulty Fuel Pump Control Module (FPCM). This vital component, also known as a Fuel System Control Module (FSCM), precisely regulates the voltage sent to your fuel pump. When it fails, it can starve your engine of fuel, leading to a host of performance problems and leaving you stranded. This module is the definitive solution to restore your vehicle’s fuel system to factory specifications.
From the Diagnostic Bay
We once had a customer with a 2008 Sierra who was on his third fuel pump in a year. The truck would run fine for a few weeks, then suddenly start sputtering and stalling under load, especially when towing. He was convinced he kept getting defective pumps. We scanned the vehicle and found a P069E code stored, pointing directly to the FPCM. The original module, mounted on the frame rail, was heavily corroded from years of exposure to road salt and moisture. After installing a new, pre-programmed FPCM, the truck ran perfectly. It’s a classic case where the controlling module, not the component it controls, is the root of the problem. Always check the FPCM first on these GM trucks and SUVs!
Symptoms of a Failing Fuel Pump Control Module
A failing FPCM can mimic a bad fuel pump, but there are specific tell-tale signs. If you’re experiencing any of the following, it’s highly likely your module needs replacement:
- ✔ Engine Stalling: The vehicle may stall unexpectedly while driving or idling, often without warning.
- ✔ No-Start Condition: The engine cranks but refuses to start due to a lack of fuel pressure.
- ✔ Hesitation & Sputtering: Your vehicle may hesitate or sputter during acceleration as the engine struggles to get adequate fuel.
- ✔ Reduced Engine Power: The vehicle may enter a ‘limp mode’ with a significant loss of power to prevent engine damage.
- ✔ Check Engine Light: Common diagnostic trouble codes (DTCs) include P069E, P0230, P025A, and U0109.
The Plug-and-Play Solution: A Pre-Programmed 2009 HUMMER H3 Fuel Pump Control Module
The biggest challenge when replacing a modern electronic module is the need for expensive programming at a dealership. We eliminate that step entirely. This 2009 HUMMER H3 Fuel Pump Control Module arrives at your door completely programmed to your vehicle’s specific Vehicle Identification Number (VIN). We load the latest GM-certified software and updates, ensuring optimal performance and compatibility right out of the box. This saves you hundreds of dollars in dealer fees and valuable time. Simply provide your VIN at checkout, and we’ll handle the complex programming for you.
Guaranteed Fitment and Compatibility
This module is a direct replacement for a wide range of General Motors vehicles. It is a reliable solution for the following part numbers: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325. It is engineered to fit and function perfectly in the following models:
- ACADIA 09
- AVALANCHE 1500 08-09
- CANYON 09
- COLORADO 09
- ENCLAVE 09
- ESCALADE & ESV & EXT 08-09
- EXPRESS 1500 VAN 08-09
- HUMMER H2 08-09
- HUMMER H3 09
- OUTLOOK 09
- SAVANA 1500 VAN 08-09
- SIERRA 1500 PICKUP 07 (New Body Style) & 08-09
- SIERRA DENALI 08-09
- SILVERADO 1500 PICKUP 07 (New Body Style) & 08-09
- SUBURBAN 1500 08-09
- TAHOE 08-09
- TRAVERSE 09
- VUE 08-09
- YUKON & YUKON XL 1500 08-09
Don’t let a faulty module keep your vehicle off the road. Order this pre-programmed 2009 HUMMER H3 Fuel Pump Control Module today and get back to driving with confidence.
Frequently Asked Questions
Do I need to take this module to a dealer for programming?
Absolutely not. We handle all the programming for you before shipment. Simply provide us with your vehicle’s VIN when you order, and the module will arrive ready for installation. This is a true plug-and-play solution.
Where is the FPCM located on my 2009 HUMMER H3?
On the 2009 HUMMER H3, the Fuel Pump Control Module is typically mounted on the rear frame crossmember. On many other compatible GM trucks and SUVs, it is located on the driver’s side (LH) frame rail, near the spare tire.
What causes these fuel pump control modules to fail?
The primary cause of failure is its exposed mounting location underneath the vehicle. This subjects the module to constant attack from water, road salt, dirt, and vibrations, leading to corrosion and internal electronic failure over time.
What if I install it and my vehicle still won’t start?
While this module is a very common point of failure, ensure you have also checked for other potential issues. Verify the fuel pump relay and fuse are good, and confirm the fuel pump itself is operational. A diagnostic scan for codes is always the best first step.
Is this a genuine GM part?
This is a high-quality replacement part built to meet or exceed original equipment specifications. It is programmed with the latest official GM software to ensure perfect communication with your vehicle’s computer systems.