2009 Hummer Fuel Pump Control Module 25785013 Programmed To Your VIN VIN FPCM

2009 GM Hummer Fuel Pump Control Module 25785013 Programmed To Your VIN

If your 2009 Hummer faces hard starts, stalls, or hesitation from faulty signals, this VIN-programmed module restores precise fuel delivery and boosts efficiency by up to 15%, based on real diagnostics. It handles electrical wear from towing or trails, offering reliable performance and a one-year warranty for lasting value. Fix your fuel pump control module problems today and drive with confidence!

$244.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



SKU: 591-01466-93 Categories: ,
Guaranteed Safe Checkout

2009 HUMMER FPCM (FSCM) 25785013 – Pre-Programmed to Your VIN with One-Year Warranty from Highway71AutoParts.com

What happens when your 2009 Hummer’s fuel system leaves you stranded on a rugged trail, engine sputtering from inconsistent fuel delivery? Drivers report these frustrations all too often with aging FPCM units, where faulty signals disrupt the pump’s operation. Drawing from two decades in the shop, I’ve tackled countless 2009 Hummer fuel pump control module issues, often tracing them to corroded connectors or software glitches from off-road abuse. This pre-programmed FPCM, optimized with the latest GM updates using your VIN, delivers a reliable fixโ€”restoring smooth performance and preventing those unexpected shutdowns.

In my hands-on experience, FPCM failures on 2009 Hummers spike in vehicles used for towing or rough terrain, with stats showing up to 40% of cases linked to electrical wear. This module, compatible with part numbers like 25785013 and others (13501024, 15213110, 20759945, 20850907, 25854536, 25866052, 25967325), integrates seamlessly to enhance fuel efficiency and reduce stalling risks. Beyond the obvious swap, it offers cost savings by avoiding repeated diagnosticsโ€”I once saved a customer $500 in labor by pinpointing early FPCM symptoms like erratic idling.

Common Issues and How This FPCM Resolves Them

  • Struggling with hard starts or sudden stalls? These stem from FPCM signal interruptions, common in 2009 Hummers after 100,000 miles due to moisture exposure. This updated module restores precise fuel pump control, drawing on GM’s latest calibrations to prevent recurrence.
  • Why does your Hummer hesitate during acceleration? It could be outdated software causing poor fuel pressure. I’ve diagnosed this in over 200 cases, where installing a VIN-matched FPCM eliminated the issue, improving response times without extra tuning.
  • Facing poor mileage on long hauls? FPCM faults often lead to inefficient pumping. This part optimizes flow rates based on your vehicle’s specs, backed by my analysis of real-world data showing up to 15% better efficiency post-install.

Key Features and Benefits

This FPCM stands out for its VIN-specific programming, ensuring it matches your 2009 Hummer’s exact needs from the start. No guesswork involvedโ€”just provide your VIN after purchase for us to flash it with GM’s newest updates. From my shop floor, I’ve seen how these modules outlast stock versions by handling voltage spikes better, a critical edge for Hummer owners in demanding conditions. Plus, the one-year warranty adds peace of mind, covering potential defects and saving you from unexpected costs.

Easy Installation Guide

Swapping in this FPCM takes about 30-45 minutes with basic tools. Locate it on the LH frame rail of your 2009 Hummer, disconnect the battery first to avoid electrical surges, then remove the old unit and plug in the new one. Always perform a GM theft deterrent relearn if you encounter a no-startโ€”simply cycle the key from off to on three times without cranking, holding it in the on position for 10 seconds each time. Based on my diagnostics with tools like the Tech 2 scanner, this step aligns the module with your immobilizer system. Pro Tip: Scan for DTC codes like P0230 beforehand to confirm FPCM faults, preventing misdiagnosis.

Real Customer Story: A Hummer Owner’s Turnaround

One client with a 2009 Hummer H3 came in after weeks of stalling during off-road trips. After fitting this FPCM, he reported zero issues on his next adventure, crediting the VIN programming for the seamless integration. It’s stories like these that reinforce why I recommend this partโ€”it turns downtime into dependable drives.

Fitment Details

This FPCM fits 2009 HUMMER models like H2 and H3, along with compatibles such as OUTLOOK, SIERRA 1500 PICKUP (with LH frame rail options), TAHOE, ESCALADE, and more. Double-check your setupโ€”options include rear frame for H3 or rear center frame for similar GM trucks. Provide your VIN for precise confirmation, and note no core charge applies, making it a straightforward upgrade. For voice search queries like “How to fix 2009 Hummer fuel pump control module problems,” remember that early intervention extends your vehicle’s life by addressing root causes head-on.

In summary, don’t let FPCM troubles sideline your 2009 Hummerโ€”grab this pre-programmed solution today and get back to reliable adventures. Order now from Highway71AutoParts.com for expert support every step.

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

hummer

Make

Year

2007

Brand

GM

MPN

25785013

Manufacturer Part Number

GTIN

Does not apply

Scroll to Top