2009 Enclave Fuel Pump Control Module 25967325 | Programmed to Your VIN

Stalling or No-Start in Your 2009 Enclave?

Restore your vehicle’s reliability with this Fuel Pump Control Module, pre-programmed to your VIN. It’s a direct-fit solution that eliminates the need for a dealer visit. Fix fuel delivery issues and get back on the road with confidence. Order today for a permanent fix!

$244.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



SKU: 591-01466-164 Categories: ,
Guaranteed Safe Checkout

Is Your Buick Enclave Stalling, Sputtering, or Refusing to Start?

If you’re experiencing frustrating engine problems like extended cranking times, sudden stalling, or a complete no-start condition, the culprit is often a failed Fuel Pump Control Module (FPCM). This critical component, also known as a Fuel System Control Module (FSCM), regulates the voltage sent to your fuel pump. When it fails, it starves your engine of the fuel it needs, leading to poor performance and leaving you stranded. Don’t mistake this for a bad fuel pump—it’s a common diagnostic error that costs time and money.

The Direct-Fit, Programmed Solution for Your GM Vehicle

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the hassle and high cost of dealership visits out of the equation. Before we ship this module, we will flash it with the latest official GM software, specifically programmed to your vehicle’s unique Vehicle Identification Number (VIN). This ensures perfect communication with your vehicle’s computer systems and restores performance to factory specifications. This is the definitive fix for your 2009 Enclave Fuel Pump Control Module issues.

A Real-World Scenario from My Shop

“A customer’s 2009 GMC Acadia (which uses the same FPCM as the Enclave) was towed in last month. It would crank but never start. They had already replaced the in-tank fuel pump themselves, but the problem persisted. A quick check with a scan tool showed diagnostic trouble code P069E – Fuel Pump Control Module Commanded OFF. The FPCM, mounted on the frame rail, had failed due to years of exposure to moisture and road salt. We installed one of our pre-programmed modules, and the engine fired up on the first try. Always check the FPCM before condemning the fuel pump!”

Key Benefits of This Pre-Programmed FPCM:

  • ✔ No Dealer Programming Required: We flash the module to your VIN before shipping. It arrives ready for installation.
  • ✔ Restores Engine Performance: Cures symptoms like stalling, hesitation, long cranks, and no-start conditions.
  • ✔ Fixes Common DTCs: A direct solution for fuel system codes like P069E, P0230, and P025A.
  • ✔ Latest GM Software: Your module comes loaded with the newest updates for optimal reliability and efficiency.
  • ✔ Wide Compatibility: A direct replacement for a broad range of GM trucks and SUVs.

Plug-and-Play Installation: Get Back on the Road Fast

Designed for both professional technicians and capable DIYers, installation is straightforward. While the exact location varies by model (e.g., frame rail on a Tahoe, rear crossmember on a Traverse), the process is simple.

  1. Safety First: Disconnect the negative battery terminal.
  2. Locate the Module: Find the old FPCM, typically mounted to the vehicle’s frame or crossmember.
  3. Disconnect and Remove: Unplug the electrical connectors and unbolt the old module from its mounting point.
  4. Install the New Module: Bolt the new, pre-programmed module in place and securely reconnect the electrical harnesses.
  5. Final Steps: Reconnect the battery terminal. The vehicle is now ready to start.

Frequently Asked Questions (FAQ)

Q: How do I know if my Fuel Pump Control Module is failing?
A: Common signs include the engine cranking but not starting, stalling while driving, hesitation under acceleration, and a Check Engine Light with fuel-related error codes. These symptoms can be intermittent at first and worsen over time.
Q: Why does this module need to be programmed?
A: The FPCM communicates with the Engine Control Module (ECM) and other vehicle systems. Programming it to your specific VIN ensures it has the correct software and calibration to manage your fuel system properly, preventing compatibility issues.
Q: How do I provide my VIN?
A: After you complete your purchase, simply send us a message with your 17-digit VIN. We cannot ship the module until we receive this information to perform the programming service.
Q: Is this a difficult part to replace myself?
A: For most individuals with basic mechanical skills and tools, this is a manageable job. The module is typically in an accessible location on the vehicle’s undercarriage, secured by a few bolts and electrical connectors.
Q: Will this fit my vehicle?
A: This module fits a wide variety of GM vehicles. Please check the detailed fitment list and cross-reference your original part number with the compatible numbers provided to ensure a perfect match.

Guaranteed Compatibility

This module is a direct replacement for the following part numbers:
13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, 25967325

It is confirmed to fit the following vehicles (and more):

  • 2009 Buick Enclave
  • 2009 Cadillac Escalade, ESV, EXT
  • 2007-2009 Chevrolet Silverado 1500 & GMC Sierra 1500
  • 2008-2009 Chevrolet Tahoe, Suburban 1500 & GMC Yukon, Yukon XL 1500
  • 2009 Chevrolet Traverse & GMC Acadia
  • 2009 Chevrolet Colorado & GMC Canyon
  • 2008-2009 Hummer H2 & 2009 Hummer H3
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

ENCLAVE

Make

Year

2007

Brand

GM

MPN

25967325

Manufacturer Part Number

GTIN

Does not apply

Scroll to Top