Is Your Truck Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than a reliable truck that suddenly becomes unpredictable. If your Chevrolet Colorado, GMC Sierra, or other GM vehicle is experiencing issues like stalling at idle, hesitation during acceleration, a long crank time, or a complete no-start condition, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. Don’t let a faulty module keep you sidelined. This is the straightforward, professional-grade solution to get your truck back to peak performance and reliability. This direct-fit, pre-programmed 2009 Colorado Fuel Pump Control Module is the fix you need to get back on the road with confidence.
Common Symptoms & Your Direct-Fit Solution
A failing FPCM can trigger a range of frustrating symptoms and diagnostic trouble codes (DTCs). If you’re seeing a Check Engine Light with codes like P069E, P0230, or P0627, or experiencing any of the following issues, this part is your answer:
- Engine stalls unexpectedly, especially at low speeds or idle
- Vehicle fails to start, but the engine still cranks
- Noticeable loss of engine power or poor acceleration
- Engine sputters or runs rough
- A “Service Fuel System” or similar warning message on the dash
Instead of paying for expensive diagnostic time and a separate programming fee at the dealership, our solution simplifies the entire process. We use your vehicle’s VIN to flash this module with the latest, most stable software updates from GM before it ever leaves our facility. This means the 2009 Colorado Fuel Pump Control Module you receive is truly plug-and-play.
Features & Tangible Benefits
- โ Pre-Programmed to Your VIN: Skip the dealership completely. This module arrives ready for installation, saving you hundreds in programming fees and a day of your time.
- โ Loaded with Latest GM Updates: We flash the module with the newest software to correct factory bugs and ensure optimal fuel pressure regulation and engine performance.
- โ Direct-Fit OEM Compatibility: Engineered to meet or exceed original equipment specifications for a perfect fit and seamless integration with your vehicle’s systems.
- โ Restores Peak Performance: Corrects poor fuel pressure and delivery, restoring the power, efficiency, and crisp throttle response you expect from your truck.
- โ Rigorously Tested for Reliability: Each unit undergoes comprehensive testing to guarantee function and durability, ensuring a long-lasting repair.
- โ This unit is backed by our one-year replacement warranty.
Expert Insight from a 20-Year Tech: I’ve seen countless trucks towed in for a no-start condition that owners feared was a major engine problem. In many cases, it was simply a failed FPCM. The real headache used to be the repair process: install the new module, then have the truck towed to a dealer just for programming. It turned a simple part swap into a costly, multi-day ordeal. This pre-programmed module changes the game. It puts the power back in your hands, turning a major headache into a straightforward, one-hour fix you can do in your own driveway. This is the smartest way to replace your 2009 Colorado Fuel Pump Control Module.
Frequently Asked Questions
How does the VIN programming process work?
It’s simple. After you complete your purchase, you will provide us with your vehicle’s 17-digit VIN. Our technicians then use that VIN to load the exact, vehicle-specific software and the latest updates from GM onto the module. We then ship the fully programmed part to you, ready for installation.
Is this part difficult to install?
For most DIYers with basic tools, this is a very manageable job. The FPCM is typically located on the vehicle’s frame rail (driver’s side on most trucks/SUVs) or crossmember. It’s usually held on by two bolts and has one electrical connector. Since our module is pre-programmed, no further steps are needed after installation. It’s a true plug-and-play repair.
Will this module fix a P069E trouble code?
Yes, P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a faulty FPCM. Replacing the module with this pre-programmed unit is the correct and definitive repair for this code, assuming the related wiring is intact.
What happens if I forget to provide my VIN?
We cannot ship your order without a VIN. The programming is essential for the module to communicate with your vehicle’s computer. We will contact you to request the VIN, but providing it at checkout will ensure the fastest possible processing and shipping of your part.
Is this compatible with vehicles other than the 2009 Colorado?
Absolutely. This module fits a wide range of GM trucks, vans, and SUVs from roughly 2007 to 2009. Please check the detailed fitment list on this page to confirm compatibility with your specific make, model, and year.