Get Your Grand Cherokee Running Right Again
Is your 2009-2010 Jeep Grand Cherokee suffering from frustrating and unpredictable engine problems? A faulty Engine Control Module (ECM) can cause everything from a simple check engine light to a vehicle that refuses to start. Stop chasing symptoms and replace the core of the problem. This professionally prepared engine computer is the definitive, hassle-free solution to restore your Jeep’s performance and reliability, getting you back on the road with confidence.
Common Symptoms & Your Direct-Fit Solution
A failing ECM can manifest in numerous ways, often mimicking other sensor or component failures. If you’re experiencing any of the following, a faulty computer is a likely culprit:
- Persistent Check Engine Light (CEL) with communication-related codes (e.g., P0601, P0606)
- Engine stalling unexpectedly or running rough
- Complete no-start condition where the engine cranks but won’t fire
- Noticeable decrease in fuel economy
- Erratic transmission shifting or behavior
- Issues with other electronic systems tied to the ECM
This replacement 2009-2010 Jeep Grand Cherokee 3.7L ECM is the answer. It arrives programmed to your vehicle’s specific VIN and mileage, making it a true plug-and-play component. There is no need for expensive trips to the dealership for additional programming—simply install it, and you’re ready to go.
Features That Deliver Real-World Benefits
- ✔ Programmed to Your VIN: Your ECM arrives ready for installation, completely bypassing the need for dealer-level programming. This saves you time and significant expense.
- ✔ Plug-and-Play Installation: Designed for a straightforward swap. Disconnect the battery, remove the old unit, install the new one, and reconnect. It’s that simple.
- ✔ Restores Original Performance: Corrects engine management issues, restoring the smooth idle, crisp acceleration, and fuel efficiency you expect from your 3.7L engine.
- ✔ Comprehensive Compatibility: This unit is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle. Compatible part numbers include: 05150467AA, 05150467AB, 68028166AB, 68028166AC, 68028166AD, 68028166AE, 68028166AF, 68060531AB, 68060531AC, 68060531AD, 68059198AA, 68059198AB, 68028167AB, 68028167AC, 68028167AD, 68028167AE, 68028162, 68059197, 68028163, 68028154, 68059196, 68028155, 68028155AD, 68028150, 68059195, 68028151, 68028174, 68028175, 68028176.
- ✔ This unit is backed by our one-year replacement warranty. Purchase with the assurance that you’re receiving a quality, dependable part.
From the Technician’s Bench: We had a 2010 Grand Cherokee in the shop that had its owner completely stumped. It would stall randomly at traffic lights, but never threw a consistent code. After checking fuel pressure and sensors, we suspected the ECM. Swapping in a pre-programmed unit like this one solved the issue instantly. The vehicle went from being an unpredictable source of stress to a reliable daily driver again. Don’t underestimate how critical a properly functioning 2009-2010 Jeep Grand Cherokee 3.7L ECM is to your vehicle’s overall health.
Frequently Asked Questions
Is this ECM truly plug-and-play?
Yes. We program the module using the VIN you provide during checkout. This ensures it has the correct software and settings for your specific vehicle, eliminating the need for any further programming after installation.
Where do I provide my vehicle’s VIN and mileage?
You can typically provide your VIN and mileage on the product page before adding to your cart or during the checkout process. Please ensure it is accurate, as this information is critical for correct programming.
Will this fix my check engine light?
If the check engine light is caused by an internal failure of the original ECM (such as with code P0601), this replacement part is the correct fix. However, it’s essential to properly diagnose your vehicle, as the light could be on for other reasons, like a faulty sensor. This part resolves all issues directly related to the 2009-2010 Jeep Grand Cherokee 3.7L ECM itself.
Does this part also fit the 2009-2010 Jeep Commander?
Yes, as stated in the compatibility information, this engine control module is also the correct fit for the 2009-2010 Jeep Commander equipped with the 3.7L engine.
What is the difference between an ECM, ECU, and PCM?
These terms are often used interchangeably. ECM (Engine Control Module) and ECU (Engine Control Unit) typically refer to the computer managing the engine. PCM (Powertrain Control Module) is a more inclusive term for a unit that may control both the engine and the transmission. For this specific vehicle, all terms refer to this same computer.