2008 Dodge Avenger Engine Computer | Programmed to VIN | Plug & Play

Get Back on the Road, Hassle-Free

Tired of stalling and check engine lights? This pre-programmed engine computer is the simple, reliable solution for your 2008 Dodge Avenger. It arrives flashed to your VIN, ready for a plug-and-play installation. Skip the dealership and restore your peace of mind. Order now and drive with confidence again!

$249.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



Guaranteed Safe Checkout

Is your Dodge Avenger or Chrysler Sebring giving you headaches with stalling, a persistent check engine light, or refusing to start? A failing Engine Control Module (ECM) is often the culprit, leaving you stranded and frustrated. This isn’t just an inconvenience; it’s a critical failure that impacts your car’s performance, fuel economy, and reliability. It’s time to stop guessing and install a solution that gets you back on the road with confidence. This is the definitive, hassle-free fix you’ve been searching for.

Common Symptoms of a Failing ECM & Your Solution

If you’re experiencing any of the issues below, a faulty ECM is the most likely cause. This unit is designed to be the direct solution, correcting these problems by restoring the critical link between your vehicle’s engine and its electronic systems.

  • Persistent Check Engine Light (CEL) with codes like P0601, P0605, or P0606
  • Engine stalling or shutting off while driving
  • Rough or inconsistent idling
  • Noticeable decrease in fuel efficiency
  • Difficulty or inability to start the engine
  • Erratic transmission shifting behavior
  • Apparent loss of power and poor acceleration

By replacing your old module with this pre-programmed 2008 Dodge Avenger engine computer, you are installing a fresh, reliable brain for your vehicle, ensuring all components communicate correctly for smooth, efficient operation.

Features & Benefits

  • ✔ Completely Plug & Play: This unit arrives at your door fully programmed to your vehicle’s specific VIN and mileage. No extra trips to the dealership for expensive flashing are required.
  • ✔ Guaranteed Compatibility: Engineered to be a direct replacement for a wide range of part numbers, ensuring a perfect fit and seamless integration with your Avenger or Sebring.
  • ✔ Restores Original Performance: Corrects common issues caused by a failing computer, from rough idling and poor MPG to no-start conditions, bringing back the smooth operation you expect.
  • ✔ Cost-Effective Solution: Save hundreds of dollars by avoiding dealership programming fees and high markups. This is the smart, economical choice for a lasting repair.
  • ✔ Rigorously Tested: Every module undergoes comprehensive testing to ensure it meets or exceeds original equipment standards for reliability and function.
  • ✔ This unit is backed by our one-year replacement warranty.

An Expert’s Tip: The ‘Junkyard Gamble’ vs. a Programmed Solution

“As a tech with over two decades of experience, I’ve seen countless drivers try to save a buck by pulling a computer from a junkyard. The problem? That computer is programmed for a different car. It won’t have the right VIN, security information, or option configuration. You’ll install it, and the car still won’t start, leaving you back at square one but with less money and more frustration. This is why a pre-programmed 2008 Dodge Avenger engine computer is the only way to go. It eliminates the guesswork and the need for specialized tools, turning a complex electronic repair into a straightforward, manageable job you can trust.”

Don’t let a faulty module dictate when and where you can drive. Take control of your repair with this reliable, easy-to-install 2008 Dodge Avenger engine computer and get your car running right again.

Frequently Asked Questions

What does “Plug & Play” mean for my installation?

Plug & Play means the engine computer you receive is pre-programmed with your car’s specific Vehicle Identification Number (VIN) and current mileage. Once you install it, the unit will immediately communicate with your vehicle’s systems without requiring any additional programming or dealer intervention. It’s ready to work right out of the box.

What information do you need from me to program the computer?

After you place your order, we will require your vehicle’s 17-digit VIN and the current mileage. This ensures we can program the module perfectly for your specific car, making the installation seamless.

Will this fix my check engine light?

If the check engine light is on due to an internal fault in your old engine computer (like error code P0601), this replacement unit is designed to resolve that issue. However, if the light is on for another reason (e.g., a bad oxygen sensor), that separate issue will still need to be addressed.

How do I know this is the correct part for my car?

This computer is compatible with the 2008 Dodge Avenger (2.7L & 3.5L) and 2007-2008 Chrysler Sebring (2.7L & 3.5L). We also list numerous compatible OEM part numbers. As long as your vehicle and part number match our list, and you provide the correct VIN, this unit is guaranteed to be the right fit.

Is this a difficult part to install myself?

For someone with basic mechanical skills, replacing an ECM is typically straightforward. It usually involves disconnecting the battery, unplugging the electrical connectors from the old unit, unbolting it, and then installing the new one in reverse order. Since our unit is Plug & Play, you avoid the most difficult part: the programming.

Genuine OEM

Yes

Year

Condition

Refurbished

MPN

05033708AD

Interchange part number

PartNumber

590

Model

AVENGER

Year

2008

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05033708AD 05033708AE 05033708AF 05094721AA 05094721AB 05094721AC, 05094721AE 05094721AG 05094721AH 05094721AI 05094721AJ 05094721AK, 05094721AL 05094721AM 05094721AN 05150157AH 05094721AO 05094858AA, 05094858AC 05094858AD 05094858AE 05094858AF

Scroll to Top