2008-2009 Tahoe Fuel Pump Control Module | Programmed to Your VIN

Get Your Tahoe Running Reliably Again

Is your Tahoe stalling or refusing to start? Restore your confidence on the road with a Fuel Pump Control Module that’s pre-programmed specifically for your SUV. No trips to the dealer, no surprise fees. Just a simple, plug-and-play solution to get your family safely back on their way. Order today for a hassle-free repair.

$244.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



Guaranteed Safe Checkout

Get Your Tahoe Back on the Road, Fast.

Is your 2008 or 2009 Chevy Tahoe giving you trouble? Stalling unexpectedly, struggling to start, or showing a check engine light can be more than just an annoyance—it’s a serious concern for your family’s primary vehicle. A faulty Fuel Pump Control Module (FPCM) is often the culprit behind these frustrating and unpredictable issues. This isn’t just a replacement part; it’s a complete, pre-programmed solution designed to restore your truck’s reliability and your peace of mind. We take your vehicle’s VIN, flash the module with the latest stable software from GM, and ship a unit that is truly plug-and-play, getting you back on the road without a mandatory trip to the dealership.

Common Symptoms & Your Solution

If you’re experiencing any of the following, a failing FPCM is the likely cause. This pre-programmed module is the definitive solution to correct these problems and prevent them from leaving you stranded.

  • Engine stalls while driving, especially under load
  • Vehicle cranks but refuses to start
  • Hesitation or sputtering during acceleration
  • Reduced engine power and poor fuel economy
  • Check Engine Light with codes like P069E, P0230, or U0109

By installing our precisely programmed 2008-2009 Tahoe Fuel Pump Control Module, you are not just swapping a part—you are directly addressing the electronic root cause with factory-correct, updated software tailored to your specific vehicle.

Features & Benefits

  • ✔ Plug & Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. No expensive dealer programming or special tools required.
  • ✔ Solves Common Fuel Issues: Directly corrects stalling, no-start conditions, and hesitation caused by a faulty FPCM.
  • ✔ Updated GM Software: We flash each module with the newest, most reliable software updates from GM to ensure optimal performance and longevity.
  • ✔ Wide Compatibility: A direct replacement for a wide range of part numbers including 25785013, 20759945, and 25967325, ensuring a perfect match.
  • ✔ This unit is backed by our one-year replacement warranty.

Expert Insight: Why a Programmed Module Matters

From my 20+ years in the garage, I’ve seen countless GM trucks and SUVs with these exact symptoms. The original FPCM is often mounted on the frame rail, where it’s exposed to harsh vibrations, moisture, and heat—a recipe for electronic failure. Simply grabbing a used module from a salvage yard is a gamble; it won’t be programmed for your Tahoe’s specific options and may fail just like your original. Our solution provides a 2008-2009 Tahoe Fuel Pump Control Module with clean, updated software that corrects the original flaws, ensuring a lasting and reliable repair. It’s the fix I’d choose for my own family’s vehicle.

Frequently Asked Questions

Do I need to get this module programmed by a dealer?

Absolutely not. The main benefit of our service is that we program the module for you using the VIN you provide during checkout. It will arrive at your door ready to be installed, saving you time and the high cost of dealership programming.

Where is the FPCM located on a 2008-2009 Tahoe?

On most GM full-size SUVs and trucks from this era, including the Tahoe, the Fuel Pump Control Module is typically mounted to the driver’s side frame rail, often near the spare tire. Always disconnect the battery before beginning any replacement.

How do I provide my VIN?

After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is specific to your vehicle.

Will this fix a check engine light with code P069E?

Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. This programmed 2008-2009 Tahoe Fuel Pump Control Module is the correct and reliable fix for that specific code and related issues.

My original part number isn’t 25785013, will this still work?

Yes. This module is a direct replacement for a wide range of compatible part numbers, including 13501024, 15213110, 20759945, 20850907, 25854536, 25866052, and 25967325. As long as your vehicle is listed in the fitment chart, this module will work perfectly.

Genuine OEM

Yes

Year
Interchange part number

Condition

Seller refurbished

Model

TAHOE

Make

Year

2007

Brand

GM

MPN

25785013

Manufacturer Part Number

, , , , , , ,

GTIN

Does not apply

Scroll to Top