Restore Dependable Power to Your HUMMER H2
There’s nothing more frustrating than turning the key on your HUMMER H2 and being met with a sputter, a stall, or complete silence. That feeling of uncertainty undermines the confidence your powerful truck is meant to inspire. A faulty Fuel Pump Control Module (FPCM) is often the hidden culprit behind these issues, disrupting the critical fuel supply your engine needs. This module is the definitive solution, arriving pre-programmed to your vehicle’s specific VIN, ensuring you get a reliable part that’s ready for a straightforward installation.
Common Symptoms & Your Solution
If you’re experiencing any of the following, a failing FPCM is the likely cause. This part is designed to permanently resolve these problems:
- Engine cranks but refuses to start
- Sudden stalling, especially while driving or at idle
- Noticeable hesitation or stumbling during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes such as P069E, P0230, or P0606
By replacing your old unit with this professionally programmed HUMMER H2 Fuel Pump Control Module, you’re not just swapping a part; you’re restoring the core reliability of your vehicle’s fuel delivery system.
Features & Benefits
- ✔ VIN-Programmed for Your H2: Arrives ready to install with the latest GM software updates flashed specifically for your vehicle. No expensive trips to the dealer for programming are necessary.
- ✔ Restores Engine Performance: Eliminates dangerous stalling and hesitation by providing consistent and correct voltage to your fuel pump, ensuring your engine gets the fuel it demands.
- ✔ Direct-Fit Replacement: Engineered to be a perfect match for the original module, replacing a wide range of compatible part numbers (including 25866052, 20759945, and 13501024) for a guaranteed fit.
- ✔ Solve Annoying DTCs: Directly addresses the root cause of common fuel system diagnostic trouble codes, helping you clear that persistent Check Engine Light for good.
- ✔ Complete Peace of Mind: This unit is backed by our one-year replacement warranty.
An Expert’s Insight on VIN Programming
As a technician, I’ve seen many people buy a used or non-programmed FPCM thinking it’s a simple swap. It’s not. This isn’t like an old-school relay; the FPCM is a smart device that communicates on your H2’s data network (the CAN bus). It needs to ‘talk’ to the Engine Control Module (ECM) and other computers. Without the correct VIN-specific software, it either won’t work at all or will cause erratic performance issues that are a nightmare to diagnose. Our pre-programming service handles this critical step for you, ensuring the new module integrates seamlessly with your vehicle, just like the original part from the factory.
Don’t let a faulty module keep your truck sidelined. This is the most reliable and efficient way to get your vehicle running strong again. Installing this pre-flashed HUMMER H2 Fuel Pump Control Module is the correct fix to restore the power and dependability you expect every time you start the engine.
Frequently Asked Questions
What exactly does this module do?
The Fuel Pump Control Module, or FPCM, acts as a sophisticated power regulator for your vehicle’s electric fuel pump. Instead of just turning the pump on or off, it varies the voltage sent to the pump based on the engine’s real-time fuel demand, improving efficiency and the lifespan of the pump.
Is this part difficult to install?
For someone with moderate mechanical skill, this is a very manageable job. The module is typically located on the vehicle’s frame rail. The process involves disconnecting the battery, unplugging the electrical connectors, unbolting the old module, and installing the new one. Since our module comes pre-programmed, no further steps are needed.
Do I need to do any programming myself?
No. That’s the primary benefit of our service. We use the VIN you provide during checkout to flash the module with the correct GM software for your specific vehicle. It arrives ready for a plug-and-play installation.
How do I provide my VIN?
After you complete your purchase, you will need to send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the part until we receive this information, as the programming is essential for it to function.
Will this fix my Check Engine Light?
If your Check Engine Light is on due to a code related to the FPCM or its circuit (like P069E), then yes, this part is the correct fix. After installation, you may need to clear the codes with a standard OBD2 scanner for the light to turn off.
Does this fit vehicles other than the HUMMER H2?
Yes, this HUMMER H2 Fuel Pump Control Module is a common part used across many 2007-2009 GM trucks and SUVs, including the Silverado, Sierra, Tahoe, Yukon, Escalade, and more. Please check the detailed fitment list on this page to confirm compatibility with your specific vehicle.