Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
If you’re dealing with frustrating engine problems like cranking with no start, sudden stalling, or a check engine light with codes like P069E, the culprit is often a faulty Fuel Pump Control Module (FPCM). For years, a fix meant a costly trip to the dealership for the part and mandatory programming. We’ve eliminated that hassle. This is a direct-fit 2008-2009 GM Fuel Pump Module that arrives at your door fully programmed to your vehicle’s specific VIN with the latest GM software updates.
A Real-World Scenario from My Shop
Just last month, a 2008 Silverado 1500 was towed in. The owner had already replaced the in-tank fuel pump himself, but the truck still wouldn’t start. He was convinced he had a major wiring issue. After a quick scan, I saw the classic P069E code (Fuel Pump Control Module Commanded OFF). The FPCM, exposed to years of road salt and moisture on the frame rail, had failed internally. Instead of running complex diagnostics, we installed one of these pre-programmed modules. The truck fired up on the first try. He could have saved himself a weekend of frustration and the cost of a new fuel pump by starting with this simple, targeted fix.
The Smarter Solution: Pre-Programmed and Ready to Install
This isn’t just a replacement part; it’s a complete solution. The FPCM, also known as a Fuel System Control Module (FSCM), is the brain that tells your fuel pump how much pressure to deliver. When it fails, your engine is starved of fuel. Our process is simple: you provide your VIN during checkout, and our technicians program the module specifically for your truck or SUV. It arrives ready to be installed, saving you hundreds in dealer programming fees and diagnostic time.
Key Symptoms of a Failing FPCM:
- โ Engine cranks but will not start
- โ Vehicle stalls unexpectedly while driving or at idle
- โ Noticeable hesitation or loss of power during acceleration
- โ Reduced Power or “Limp Mode” message on the dash
- โ Active Check Engine Light with fuel system-related codes (P069E, P0230, P0627)
Simple Installation for DIYers and Professionals
Replacing the 2008-2009 GM Fuel Pump Module is a straightforward job that can be done with basic hand tools. On most compatible trucks and SUVs like the Tahoe, Suburban, and Sierra, the module is located on the driver’s side frame rail, making it easily accessible.
- Safety First: Disconnect the negative battery terminal to prevent any electrical shorts.
- Locate the Module: Find the old FPCM. On most trucks, it’s mounted to the frame crossmember near the spare tire. On other models (like the Vue or Traverse), check the specific location noted in the fitment list.
- Disconnect and Remove: Unplug the electrical connectors. Be sure to press the release tabs firmly. Then, unbolt the module from the frame.
- Install the New Module: Bolt your new, pre-programmed module into place. Reconnect the electrical connectors until they click securely.
- Final Step: Reconnect the negative battery terminal. The vehicle is now ready to start with no further programming required.
Guaranteed Compatibility
This module is a direct replacement for a wide range of GM vehicles and is compatible with numerous original part numbers. Please verify your vehicle is on the fitment list below. This part replaces the following numbers: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.
Vehicle Fitment Information
This part fits the following vehicles:
- ACADIA 09
- AVALANCHE 1500 08-09
- CANYON 09
- COLORADO 09
- ENCLAVE 09
- ESCALADE 08-09
- ESCALADE ESV 08-09
- ESCALADE EXT 08-09
- EXPRESS 1500 VAN 08-09
- HUMMER H2 08-09
- HUMMER H3 09
- OUTLOOK 09
- SAVANA 1500 VAN 08-09
- SIERRA 1500 PICKUP 07 (New Style)
- SIERRA 1500 PICKUP 08-09
- SIERRA DENALI 08-09
- SILVERADO 1500 PICKUP 07 (New Style)
- SILVERADO 1500 PICKUP 08-09
- SUBURBAN 1500 08-09
- TAHOE 08-09
- TRAVERSE 09
- VUE 08-09
- YUKON 08-09
- YUKON XL 1500 08-09
Frequently Asked Questions
Q: Is programming really necessary for this part?
A: Yes, absolutely. The FPCM must be programmed with your vehicle’s VIN to communicate correctly with the onboard computer (ECU). Our service handles this for you, so it’s plug-and-play upon arrival.
Q: How do I provide my VIN?
A: After you complete your purchase, you will receive instructions to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship the module until we receive and program it with your VIN.
Q: Will this fix my check engine light for code P069E?
A: P069E is one of the most common diagnostic trouble codes for a failed 2008-2009 GM Fuel Pump Module. While we can’t guarantee a fix without a full vehicle diagnosis, if the module is the root cause, this part will resolve the code.
Q: What happens if I install it without programming?
A: An unprogrammed module will not work. Your vehicle will likely exhibit the same no-start or stalling symptoms because the FPCM cannot communicate with the rest of the vehicle’s systems.
Q: Is this part difficult to install myself?
A: For most people with basic mechanical skills, this is a very manageable job. The module is typically in an accessible location on the vehicle’s frame, requiring only basic hand tools to replace.