Tired of Unpredictable Electrical Problems in Your GM Truck or SUV?
Are you dealing with frustrating issues like intermittent power windows, a blower motor that won’t cooperate, or random warning lights on your dash? These are classic signs of a failing Body Control Module (BCM), the central computer responsible for your vehicle’s comfort and convenience features. Instead of paying for expensive dealership diagnostics and programming, get the simple, reliable fix with our pre-programmed BCM, designed to restore your vehicle’s full functionality right out of the box.
Common Symptoms & Your Solution
A faulty BCM can turn your dependable truck or SUV into a source of daily annoyance. If you’re experiencing any of the following, this module is the definitive solution:
- Intermittent or non-working power windows, door locks, or interior/exterior lights
- HVAC controls that are unresponsive or a blower motor that works sporadically
- An airbag warning light that won’t turn off, often with DTC B1001
- Security system malfunctions, causing no-start conditions or stalling
- A cluster of diagnostic trouble codes related to body electronics
This Programmed 2007-2011 Yukon Body Control Module arrives ready for a straightforward, plug-and-play installation, eliminating the need for a trip to the dealer and getting your vehicle back to perfect working order.
Features & Benefits
- ✔ VIN-Programmed for You: We program the module to your vehicle’s specific VIN before shipping. This ensures complete compatibility and restores all original functions without any additional setup.
- ✔ Plug-and-Play Installation: Simply locate your old BCM under the steering column, disconnect it, and plug this one in. The entire process typically takes less than 5 minutes.
- ✔ Restore Full Functionality: Regain reliable control over your lights, windows, locks, wipers, and HVAC system. Eliminate the electrical gremlins that have been plaguing your vehicle.
- ✔ OEM-Standard Quality: Built to meet or exceed original equipment specifications for dependable, long-lasting performance in any driving condition.
- ✔ Warranty Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: Check Your Grounds!
As a technician with over 20 years of experience on these GM platforms, I can’t stress this enough: before you condemn your old BCM, check the main ground connections. A corroded or loose ground, especially the one under the driver’s door sill plate or on the A-pillar, can mimic BCM failure. When you install your new Programmed 2007-2011 Yukon Body Control Module, take an extra minute to clean and tighten these grounds. This simple step can prevent a host of future electrical issues and ensure your new module performs flawlessly for years to come.
Whether you’re fixing the family Tahoe, maintaining your workhorse Silverado, or keeping your Escalade in pristine condition, this BCM is the smart, cost-effective solution. By providing a Programmed 2007-2011 Yukon Body Control Module, we help you bypass expensive dealership fees and get you back on the road with confidence.
Frequently Asked Questions
What does a Body Control Module do?
The BCM is a computer in your vehicle that controls and monitors various electronic accessories. It manages non-engine-related functions like power windows, power mirrors, air conditioning, the anti-theft system, central locking, and interior/exterior lighting.
Is this BCM difficult to install?
No, installation is designed to be very straightforward for a DIYer with basic tools. The BCM is typically located under the driver’s side dashboard near the steering column. Since it comes pre-programmed to your VIN, it’s a simple plug-and-play process that usually takes only a few minutes.
Why is VIN programming so important?
VIN programming loads your vehicle’s specific software and configurations onto the module. This ensures that all features, from your power seat settings to the type of headlights you have, work correctly. Without it, the module won’t communicate properly with your vehicle’s other computers, leading to malfunctions.
Will this fix my airbag light with code B1001?
A faulty BCM is a common cause of the B1001 code. Replacing it often resolves the issue. However, in some cases, an additional ‘Setup SDM Primary Key in BCM’ procedure is required using a professional scan tool to sync the new BCM with the airbag system and turn off the light.
Do I need to send my old BCM back?
No, there is no core charge for this part. You can keep your old module without any hassle or extra fees.
How do I know if this part fits my vehicle?
This BCM is compatible with a wide range of 2007-2013 GM trucks and SUVs, including the Yukon, Tahoe, Silverado, Sierra, and Escalade. Please check the detailed fitment list on this page or match one of the interchangeable part numbers (like 25844480, 15940214, 25835966, etc.) to your original unit to confirm compatibility.